Bosch Rotak 32 Operation instructions

Robert Bosch GmbH
Power Tools Division
70764 Leinfelden-Echterdingen
GERMANY
www.bosch-garden.com
F 016 L81 164 (2014.11) O / 12 XXX
Rotak 32
en Original instructions
OBJ_DOKU-24112-005.fm Page 1 Wednesday, November 19, 2014 2:32 PM

2| English
F 016 L81 164 | (19.11.14) Bosch Power Tools
English
Safety Notes
Warning! Read these instructions
carefully, be familiar with the con-
trols and the proper use of the ma-
chine. Please keep the instructions
safe for later use!
Explanation of symbols
General hazard safety alert.
Read instruction manual.
Pay attention that bystanders
are not injured through foreign
objects thrown from the ma-
chine.
Warning: Keep a safe distance
from the machine when operat-
ing.
Caution: Do not touch rotating
blades.Sharpblade(s).Beware
of severing toes or fingers.
Switch off and remove plug
from mains before adjusting,
cleaning or if the cable is entan-
gled and before leaving the garden
product unattended for any period.
Keep the supply flexible cord away
from the cutting blades.
Not applicable.
Wait until all machine compo-
nents have completely stopped
before touching them. The
blades continue to rotate after the ma-
chine is switched off, a rotating blade
can cause injury.
Do not use the machine in the
rain or leave it outdoors when it
is raining.
Beware electric shock hazard.
Keep supply flexible cord away
from cutting means.
Operation
Never allow children or people unfa-
miliar with these instructions to use
the machine. Local regulations may
restrictthe ageof theoperator. When
not in use store the machine out of
reach of children.
This machine is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities,orlackofexperienceand
knowledge, unless they have been
given supervision or instruction con-
cerning use of the machine by a per-
son responsible for their safety.
Children should be supervised to en-
sure that they do not play with the
machine.
Never mow while people, especially
children, or pets are nearby.
The operator or user is responsible
for accidents or hazards occurring to
other people or their property.
OBJ_BUCH-1349-005.book Page 2 Wednesday, November 19, 2014 2:33 PM

English | 3
Bosch Power Tools F 016 L81 164 | (19.11.14)
Do not operate the machine when
barefoot or wearing open sandals, al-
ways wear substantial footwear and
long trousers.
Thoroughly inspect the area where
themachine isto beused andremove
all stones, sticks, wires, bones and
other foreign objects.
Before using, always visually inspect
to see that the blades, blade bolts
and cutter assembly are not worn or
damaged. Replace worn or damaged
blades and bolts in sets to preserve
balance.
Mow only in daylight or in good artifi-
cial light.
Avoid mowing in bad weather condi-
tionsespeciallywhen thereis arisk of
lightning.
Avoid operating the machine in wet
grass, where feasible.
Walk, never run.
Never operate the appliance with de-
fective guards or shields, or without
safety devices, for example deflec-
tors and/or grass catchers in place.
Working on banks can be dangerous.
– Do not mow on excessively steep
slopes.
– Always be sure of your footing on
slopes or wet grass.
– Mow across the face of slopes – nev-
er up and down.
– Exercise extreme caution when
changing direction on slopes.
Use extreme caution when stepping
back or pulling the machine towards
you.
Never mow by pulling the mower to-
wards you.
Stop the blades if the machine has to
be tilted for transportation when
crossing surfaces other than grass
and when transporting the machine
to and from the area to be mowed.
Do not tilt the machine when starting
or switching on the motor, except if
the machine has to be tilted for start-
ing in long grass. In this case, do not
tilt it more than absolutely necessary
and tilt only the part which is away
from the operator. Always ensure
that both hands are in the operating
position before returning the ma-
chine to the ground.
Switch on the motor according to the
instructions with feet well away from
rotating parts.
Do not put hands or feet near or un-
der rotating parts.
Always stand clear of the discharge
zone when operating the machine.
Never pick up or carry the machine
while the motor is running.
Do not modify this product. Unau-
thorized modifications may impair
the safety of your product and may
result in increased noise and vibra-
tion.
Regularly inspect the supply cable
and any extension cables. Do not con-
nect damaged cables to the supply or
touch a damaged cable before it is
disconnected from the supply. A
damaged cable can lead to contact
with live parts. Beware electric shock
hazard.
OBJ_BUCH-1349-005.book Page 3 Wednesday, November 19, 2014 2:33 PM

4| English
F 016 L81 164 | (19.11.14) Bosch Power Tools
Remove the plug from the socket:
– Whenever you leave the machine.
– before clearing a blockage,
– before checking, cleaning or working
on the machine,
– afterstrikingaforeignobject. Inspect
the machine for damage and make re-
pairs as necessary,
– if the machine starts to vibrate abnor-
mally (check immediately).
Connecting to the mains
The voltage indicated on the rating
plate must correspond to the voltage
of the power source.
We recommend that this equipment
is only connected into a socket which
is protected by a circuit-breaker that
would be actuated by a 30 mA residu-
al current.
Only use or replace power supply ca-
bles for this unit which correspond to
the types indicated by the manufac-
turer. See the operating instructions
for the order no. and types.
Never touch the mains plug with wet
hands.
Do not run over, crush or pull the
power supply cord or extension cord,
otherwise it may be damaged. Pro-
tectthecablefromheat,oilandsharp
edges.
The extension lead must have a cross
section in accordance with the oper-
ating instructions and be protected
against splashed water. The connec-
tion must not be in water.
Always wear gardening gloves when
handling or working near the sharp
blades.
Electrical Safety
Warning! Switch off, remove plug
from mains before adjusting,
cleaning or if cable is cut, damaged
or entangled.
The blades continue to rotate for a
few seconds after the machine is
switched off.
Caution – do not touch the rotating
blade.
Your machine is double insulated for
safety and requires no earth connec-
tion.Theoperating voltageis230 VAC,
50 Hz (for non-EU countries 220 V,
240 V as applicable). Only use ap-
proved extension cables. Contact your
Bosch Service Centre for details.
Extension cords/leads should only be
used if they comply with H05VV-F,
H05RN-F types or IEC type design
(60227 IEC 53, 60245 IEC 57).
If you want to use an extension cable
when operating your product, only the
following cable dimensions should be
used:
– 1.0 mm2: max. length 40 m
– 1.5 mm2: max. length 60 m
– 2.5 mm2: max. length 100 m
Note: If an extension cable is used it
must be earthed and connected
through the plug to the earth cable of
your supply network in accordance
with prescribed safety regulations.
OBJ_BUCH-1349-005.book Page 4 Wednesday, November 19, 2014 2:33 PM

English | 5
Bosch Power Tools F 016 L81 164 | (19.11.14)
If in doubt contact a qualified electri-
cian or the nearest Bosch Service Cen-
tre.
WARNING! Inadequate extension
cables can be dangerous. Exten-
sion cable, plug and socket must be
of watertight construction and in-
tended for outdoor use.
Cable connections should be kept dry
and off the ground.
It is recommended for increased elec-
trical safety to use a Residual Current
Device (RCD) with a tripping current of
not more than 30 mA. Always check
your RCD every time you use it.
For products not sold in GB:
WARNING: For your safety, it is re-
quired that the plug attached to the ma-
chine is connected with the extension
cord. The coupling of the extension
cord must be protected against splash
water, be made of rubber or coated
with rubber. The extension cord must
be used with a cable strain relief.
The connection lead must be inspected
for signs of damage at regular intervals
and may only be used if in perfect con-
dition.
If the supply cord is damaged, it must
be replaced by a Bosch Service Centre.
Products sold in GB only: Your prod-
uctisfittedwithaBS 1363/Aapproved
electric plug with internal fuse (ASTA
approved to BS 1362).
Ifthe plugis notsuitable foryour socket
outlets, it should be cut off and an ap-
propriate plug fitted in its place by an
authorised customer service agent.
The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of
to avoid a possible shock hazard and
should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only:
Use a residual current device (RCD)
with a rated residual current of 30 mA
or less.
Maintenance
Always wear gardening gloves
when handling or working near the
sharp blades.
Keep all nuts, bolts and screws tight
to be sure that the machine is in safe
working condition.
Check the grass catcher frequently
for wear or deterioration.
Examine the machine and replace
worn or damaged parts for safety.
Ensurereplacement cuttingmeansof
the right type are used.
Ensure replacement parts fitted are
Bosch approved.
Before storage ensure machine is
clean and free from debries, if neces-
sary clean with a soft, dry brush.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Symbol Meaning
Movement direction
Reaction direction
OBJ_BUCH-1349-005.book Page 5 Wednesday, November 19, 2014 2:33 PM

6| English
F 016 L81 164 | (19.11.14) Bosch Power Tools
Intended Use
The garden product is intended for domestic lawnmowing.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60335-2-77.
Typically the A-weighted noise levels of the product are:
Sound pressure level 79 dB(A); sound power level 93 dB (A).
Uncertainty K =1 dB.
Vibration total values ah(triax vector sum) and uncertainty K
determined according to EN 60335:
ah<2.5m/s2, K =1.5 m/s2.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC, 2000/14/EC including their amendments and
complies with the following standards: EN 60335-1,
EN 60335-2-77.
2000/14/EC: Guaranteed sound power level 94 dB(A). Con-
formity assessment procedure according to Annex VI.
Equipment category: 32
Notified body:
TÜV Rheinland Intercert Kft., Budapest, Hungary, Nr. 1008
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS23,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
19.11.2014
Mounting and Operation
Wear protective gloves
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Accessories/Spare Parts
Lawnmower Rotak 32
Article number 3 600 H85 B..
Rated power input W1200
Blade width cm 32
Height of cut mm 20 – 60
Grassbox, capacity l31
Weight according to
EPTA-Procedure 01/2003 kg 7.0
Protection class /II
Serial number see type plate on
the garden product
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden prod-
uct. The trade names of the individual garden products may vary.
Symbol Meaning
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action Figure Page
Delivery Scope 19
Handle Assembly 29
Snap together the Grassbox 39
Grassbox fitting/removing 39
Adjusting the Cutting Height 410
Connecting the Extension Lead 510
Starting 510
Stopping 510
Working Advice 5–6 10–11
Blade Maintenance 711
Selecting Accessories 711
OBJ_BUCH-1349-005.book Page 6 Wednesday, November 19, 2014 2:33 PM

English | 7
Bosch Power Tools F 016 L81 164 | (19.11.14)
Troubleshooting
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: [phone]
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: [phone]
Fax: [phone]
STOP
Problem Possible Cause Corrective Action
Motor refuses to start Power turned off Turn power on
Mains socket faulty Use another socket
Extension cable damaged Inspect cable, replace if damaged
Fuse faulty/blown Replace fuse
Possible clogging Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Motor protector has activated Allow motor to cool and increase height of cut
Mowing too low for the conditions Increase height of cut
Machine functions
intermittently
Extension cable damaged Inspect cable, replace if damaged
Internal wiring of machine damaged Contact Service Agent
Motor protector has activated Allow motor to cool and increase height of cut
Machine leaves ragged finish
and/or
Motor labours
Height of cut too low Increase height of cut
Cutting blade blunt Replace the blade
Possible clogging Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Blade fitted upside down Refit blade correctly
Blade not rotating while garden
product switched on
Cutting blade obstructed Switch off garden product
Clear obstruction (always wear protective
gloves)
Blade nut/bolt loose Tighten blade nut/bolt (17 Nm)
Excessive vibrations/noise Blade nut/bolt loose Tighten blade nut/bolt (17 Nm)
Cutting blade damaged Replace the blade
OBJ_BUCH-1349-005.book Page 7 Wednesday, November 19, 2014 2:33 PM

8| English
F 016 L81 164 | (19.11.14) Bosch Power Tools
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: [phone]
Fax: [phone]
Inside New Zealand:
Phone: [phone]
Fax: [phone]
Outside AU and NZ:
Phone: [phone]
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: [phone]
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Bosch Headquarters
Midrand, Gauteng
Tel.: [phone]
Fax: [phone]
E-Mail: rbsa-hq.pt[email protected]
Disposal
Do not dispose of garden products into household waste!
Only for EC countries:
According to the European directive
2012/19/EU for Waste Electrical and Elec-
tronicEquipmentanditsimplementationinto
national law, electrical and electronic equip-
ment that are no longer usable must be col-
lected separately and disposed of in an envi-
ronmentally correct manner.
Subject to change without notice.
OBJ_BUCH-1349-005.book Page 8 Wednesday, November 19, 2014 2:33 PM

| 9
Bosch Power Tools F 016 L81 164 | (19.11.14)
STOP
CLICK!
1
2
3
7,0 kg
1x
1x
1x 2x2x2x
OBJ_BUCH-1349-005.book Page 9 Wednesday, November 19, 2014 2:33 PM

F 016 L81 164 | (19.11.14) Bosch Power Tools
10 |
1
2
4
60 mm
40 mm
20 mm
5
OBJ_BUCH-1349-005.book Page 10 Wednesday, November 19, 2014 2:33 PM