Bose SURROUND SPEAKERS 700 User manual

SURROUND SPEAKERS 700

Choose your setup method
Your setup method depends on which soundbar you have.
Bose Soundbar 500, Bose Soundbar 700, or
Bose Smart Soundbar 300: See method 1.
SoundTouch 300 soundbar:See method 2.
ENGLISH
START HERE
s
SOFTWARE UPDATE REQUIRED*
Before setup, you MUST make sure your soundbar
software is up to date. Refer to your online owner’s guide for
more information:
Bose Soundbar 500: worldwide.Bose.com/Support/SB500
Bose Soundbar 700: worldwide.Bose.com/Support/SB700
SoundTouch 300 soundbar: global.Bose.com/Support/ST300
CAUTION: Do NOT set up the surround speakers without
first updating your soundbar. Failure to do so can
damage the surround speakers.
*Not applicable for Bose Smart Soundbar 300.
a b

ENGLISH
METHOD 1
BOSE SOUNDBAR 500, BOSE SOUNDBAR 700, BOSE SMART SOUNDBAR 300
Set up using the Bose Music app
a. In the Bose Music app, from the My Products screen, select your soundbar.
b. Go to the Settings menu to add your surround speakers.
New to Bose Music app?
Download the app and follow the app instructions to set up your soundbar and surround speakers.

ENGLISH
METHOD 2
SOUNDTOUCH 300 SOUNDBAR
a b
Connect your adapters
a. Insert the color-coded speaker cable wires into their
corresponding terminals.
b. Turn the screws to the right (clockwise) to secure the wires into
the terminals.
c. Repeat steps a and b to connect your other adapter.
Attach the base to the speakers
a. Place the base into the bottom of the speaker. The base should fit flush
into your speaker with the wire terminals facing the back.
b. Attach the base to the speaker using the screwdriver to turn the screw
on the bottom of the base to the right (clockwise) until seated.

METHOD 2
(CONTINUED)
ENGLISH
d
Connect your rear speakers
a. Insert the adapter into the back of the speaker.
b. Insert the two-pin connector into the wireless receiver.
c. Repeat steps a and b to set up your other speaker.
c
Identify switch settings on wireless receivers
a. Confirm that the switch on one wireless receiver is set to R(right).
b. Confirm that the switch on the other wireless receiver is set to L(left).

ENGLISH
Connect the surround speakers to the soundbar
a. On your SoundTouch 300 remote, press e.
b. Press and hold Guntil lon the soundbar blinks white.
Once the surround speaker connects, you hear a tone and l
glows white.
NOTE: Connecting may take several minutes.
METHOD 2
(CONTINUED)
f
e
Place your rear speakers and wireless receivers
a. Facing your TV, place the speaker and Rwireless receiver on the right
side of your room.
b. Facing your TV, place the speaker and Lwireless receiver on the left side
of the room.
c. Connect to power.

ENGLISH
METHOD 2
(CONTINUED)
Run ADAPTiQ audio calibration
a. On your SoundTouch 300 remote, press e.
b. Press and hold Huntil gand lon the soundbar glow green.
NOTE: To cycle through languages, press dand con the
navigation pad.
h
Set up ADAPTiQ audio calibration
a. Connect the ADAPTiQ headset (included with the soundbar) to the
soundbar’s aconnector.
b. Put the headset on your head.
ADAPTiQ
g

Vælg opsætningsmetode
Opsætningsmetoden afhænger af, hvilken soundbar du har.
Bose Soundbar 500, Bose Soundbar 700 eller
BoseSmartSoundbar 300: Se metode 1.
SoundTouch 300 soundbar:Se metode 2.
DANSK
START HER
s
SOFTWAREOPDATERING PÅKRÆVET*
Inden opsætningen SKAL du sørge for, at din soundbarsoftware
er opdateret. Se din onlinebrugervejledning for at få flere
oplysninger:
Bose Soundbar 500: worldwide.Bose.com/Support/SB500
Bose Soundbar 700: worldwide.Bose.com/Support/SB700
SoundTouch 300 soundbar: global.Bose.com/Support/ST300
FORSIGTIG: Du må IKKE sætte surroundhøjttalerne op
uden først at opdatere din soundbar. Ellers kan
surroundhøjttalerne blive beskadigede.
*Gælder ikke for Bose Smart Soundbar 300.
a b

DANSK
METODE 1
BOSE SOUNDBAR 500, BOSE SOUNDBAR 700, BOSE SMART SOUNDBAR 300
Opsætning ved hjælp af Bose Music-appen
a. I Bose Music-appen skal du vælge din soundbar på skærmbilledet My Products.
b. Gå til menuen Settings for at tilføje dine surroundhøjttalere.
Er det første gang du bruger Bose Music-appen?
Download appen og følg instruktionerne i appen for at konfigurere din soundbar og dine surroundhøjttalere.

DANSK
METODE 2
SOUNDTOUCH 300 SOUNDBAR
a b
Tilslut dine adaptere
a. Sæt det farvekodede højttalerkabel i deres tilhørende terminaler.
b. Drej skruerne til højre (med uret) for at fastgøre ledningerne i
terminalerne.
c. Gentag trin a og b for at tilslutte den anden adapter.
Fastgør basen til højttalerne
a. Sæt basen ind i bunden af højttaleren. Basen skal flugte med
højttaleren, og ledningsterminalerne skal vende bagud.
b. Fastgør basen til højttaleren ved at bruge skruetrækkeren til at skrue
skruen på bunden af basen mod højre (med uret), indtil den er på plads.