Boser HS-2606 User manual

HS-2606
ULV Intel® Celeron® processor
Embedded Engine Board
•CompactFlash•PCMCIA•Mini PCI•
•CRT/Panel•TV-Out•LAN•Audio•
•ATA/33/66/100•4 COM•USB2.0•WDT•

Copyright Disclaimers
The accuracy of contents in this manual has passed thorough checking and review before
publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for
any infringements of patents or other rights resulting from its use. The manufacturer will
not be responsible for any direct, indirect, special, incidental or consequential
damages arising from the use of this product or documentation, even if advised of
the possibility of such damage(s).
This manual is copyrighted and BOSER Technology Co., Ltd. reserves all
documentation rights. Unauthorized reproduction, transmission, translation, and
storage of any form and means (i.e., electronic, mechanical, photocopying, recording)
of this document, in whole or partly, is prohibited, unless granted permission by BOSER
Technology Co., Ltd.
BOSER Technology Co., Ltd. reserves the right to change or improve the contents of
this document without due notice. BOSER Technology Co., Ltd. assumes no
responsibility for any errors or omissions that may appear in this manual, nor does
it make any commitment to update the information contained herein.
T
T
Tr
r
ra
a
ad
d
de
e
em
m
ma
a
ar
r
rk
k
ks
s
s
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
AMI is a registered trademark of AMI Software, Inc.
AMI is a registered trademark of AMI Software, Inc.
All other trademarks, products and or product names mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2008 BOSER Technology Co., Ltd.
All Rights Reserved.
Edition 2.1, February 26, 2008

Table of Contents
Chapter 1 General Description ..................................1
1.1 Major Features....................................................................... 2
1.2 Specifications ........................................................................ 3
1.3 Board Dimensions................................................................. 4
Chapter 2 Unpacking ..................................................5
2.1 Opening the Delivery Package............................................. 5
2.2 Inspection............................................................................... 5
Chapter 3 Hardware Installation ..............................7
3.1 Before Installation ................................................................. 7
3.2 Board Layout ......................................................................... 8
3.3 Jumper List ............................................................................ 9
3.4 Connector List ....................................................................... 9
3.5 Configuring the CPU ............................................................. 9
3.6 System Memory ................................................................... 10
3.7 CMOS Data Clear................................................................. 10
3.8 Power and Fan Connectors................................................ 10
3.9 System Front Panel Control ............................................... 11
3.10 VGA Controller .................................................................... 12
3.11 TV-Out Connector ............................................................... 14
3.12 Ethernet Connector............................................................. 14
3.13 Audio Connectors ............................................................... 15
3.14 PCI E-IDE Drive Connector................................................. 16
3.15 Serial Port Connectors ....................................................... 17
3.16 USB Connector .................................................................... 17
3.17 Keyboard/Mouse Connectors ............................................ 18
3.18 Watchdog Timer .................................................................. 18
3.19 GPIO Function ..................................................................... 19
3.20 Mini PCI Slot......................................................................... 20
3.21 CompactFlashConnector................................................ 20
3.22 PCMCIA Connector ............................................................. 20

Chapter 4 AMI BIOS Setup..................................... 21
4.1 Starting Setup...................................................................... 21
4.2 Using Setup ......................................................................... 22
4.3 Main Menu............................................................................ 23
4.4 Standard CMOS Setup ........................................................ 24
4.5 Advanced CMOS Setup ...................................................... 25
4.6 Advanced Chipset Setup.................................................... 26
4.7 Power Management Setup ................................................. 27
4.8 PCI / Plug and Play Setup................................................... 28
4.9 Peripheral Setup.................................................................. 29
4.10 Auto-Detect Hard Disks ...................................................... 30
4.11 Change Supervisor/User Password .................................. 31
4.12 Auto Configuration with Optimal Settings ....................... 32
4.13 Auto Configuration with Fail Safe Settings ...................... 33
4.14 Save Settings and Exit........................................................ 34
4.15 Exit Without Saving............................................................. 35
Chapter 5 Software Utilities..................................... 37
5.1 VGA Driver Installation ....................................................... 37
5.2 LAN Driver Installation........................................................ 47
5.3 Audio Driver Installation..................................................... 57
5.4 USB2.0 Driver Installation .................................................. 63

Safety Instructions
Integrated circuits on computer boards are sensitive to static electricity. To
avoid damaging chips from electrostatic discharge, observe the following
precautions:
 Do not remove boards or integrated circuits from their anti-static packaging
until you are ready to install them.
 Before handling a board or integrated circuit, touch an unpainted portion of
the system unit chassis for a few seconds. This helps to discharge any static
electricity on your body.
 Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components. Fasten the ALLIGATOR clip
of the strap to the end of the shielded wire lead from a grounded object.
Please wear and connect the strap before handle the product to ensure
harmlessly discharge any static electricity through the strap.
 Please use an anti-static pad when putting down any components or parts or
tools outside the computer. You may also use an anti-static bag instead of
the pad. Please inquire from your local supplier for additional assistance in
finding the necessary anti-static gadgets.
NOTE: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTIONS.

1
Chapter 1
General Description
The HS-2606 is a 100/133MHz FSB VIA CLE266/VT8235
chipset-based board designed for Mini PCI Local Bus ULV Intel®
Celeron® processor 400/650MHz. These features combine and make
the HS-2606 and ideal all-in-one industrial single board computer.
Additional features include and enhanced I/O with CF, PCMCIA,
CRT/Panel, audio, LAN TV-Out, 4 COM, and USB2.0 interfaces.
Its onboard ATA/33/66/100 to IDE drive interface architecture allows
the HS-2606 to supports data transfers of 33, 66 or 100MB/sec. To one
IDE drive connection. Designed with the VIA CLE266/VT8235 core
logic chipset, the board supports VIA Eden 1GHz Embedded CPU. The
VIA CLE266 integrated S3 3D supports CRT display up to 1400 x 1050
@ 60Hz, and panel display up to 1400 x 1050.
HS-2606 offers PCMCIA connector and CompactFlash reader in
addition. +10~+30V wide range single DC power in can make HS-2606
suitable for all kinds of environments even more.

2
System memory is also sufficient with the one 200-pin SO-DDR socket
that can supports up to 1GB.
Additional onboard connectors include 4 USB2.0 port providing faster
data transmission. And one external RJ-45 connector for 10/100 Based
Ethernet use.
1.1 Major Features
The HS-2606 comes with the following features:
 ULV Intel® Celeron® embedded 400/650MHz
 One SO-DDR socket with a max. capacity of 1GB
 VIA CLE266/VT8235 chipset
 Winbond W83697UF super I/O chipset
 VIA CLE266 graphics controller
 RealTek RTL8139DL Ethernet controller
 AC97 3D audio controller
 Fast PCI ATA/33/66/100 IDE controller
 CF, PCMCIA, 4 COM, 4 USB2.0
 TV-Out function
 +10~+30V wide range single DC power in

3
1.2 Specifications
 CPU: ULV Intel® Celeron® processor 400/650MHz
 Memory: One SO-DDR socket supports up to 1GB
 Chipset: VIA CLE266/VT8235
 I/O Chipset: Winbond W83697UF
 CompactFlash: One, Type I/II IDE interface adapter
 PCMCIA: Two PC Card or CardBus slots
 PCI Slot: One, Type I mini PCI slot
 VGA: VIA CLE266 integrated S3 3D supports AGP Bus and Hardware
MPEG-2
 TV-Out: Supports PAL or NTSC TV system
 Ethernet: RealTek RTL8139DL 10/100 Based LAN
 Audio: AC97 3D audio controller
 IDE: One 2.0-pitch 44-pin IDE connector
 Serial Port: 16C550 UART-compatible RS-232 x 4 serial ports with
16-byte FIFO
 USB: 4 internal USB2.0 ports
 Keyboard/Mouse: PS/2 6-pin Mini DIN
 BIOS: AMI PnP Flash BIOS
 Watchdog Timer: Software programmable time-out intervals from
1~255 sec.
 CMOS: Battery backup
 Power In: +7~+26V wide range single DC power in
 Temperature: 0~+60°C (operating)
 Dimensions: 14.5(L) x 10.2(W) cm

4
1.3 Board Dimensions

5
Chapter 2
Unpacking
2.1 Opening the Delivery Package
The HS-2606 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Saftey instructions in front of this manual describe anti-static
precautions and procedures.
2.2 Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The HS-2606 delivery package
contains the following items:

HS-2606 Board x 1
 Utility CD Disk x 1

Cables Package x 1
 Jumper Bag x 1

User’s Manual

6
Cables Package
NO. Description
1 4-pin power cable x 1
2 MIC/Audio cable x 1
3 8-pin USB split type cable x 1
4 PS/2 KB/MS transfer cable x 1
5 RS-232 cable x 4
6 IDE flat cable x 1
It is recommended that you keep all the parts of the delivery package
intact and store them in a safe/dry place for any unforeseen event
requiring the return shipment of the product. In case you discover any
missing and/or damaged items from the list of items, please contact
your dealer immediately.

7
Chapter 3
Hardware Installation
This chapter provides the information on how to install the hardware
using the HS-2606. This chapter also contains information related to
jumper settings of switch, and watchdog timer selection etc.
3.1 Before Installation
After confirming your package contents, you are now ready to install
your hardware. The following are important reminders and steps to
take before you begin with your installation process.
1. Make sure that all jumper settings match their default settings
and CMOS setup correctly. Refer to the sections on this chapter
for the default settings of each jumper.
2. Go through the connections of all external devices and make
sure that they are installed properly and configured correctly
within the CMOS setup. Refer to the sections on this chapter
for the detailed information on the connectors.
3. Keep the manual and diskette in good condition for future
reference and use.

8
3.2 Board Layout

9
3.3 Jumper List
Jumper Default Setting Setting Page
JBAT1 Clear CMOS: Normal Operation Short 1-2 10
JP2 Panel Voltage Select: +3.3V Short 1-2 12
3.4 Connector List
Connector Definition Page
CN1 4-pin Power In Connector 10
CN2 External VCC Out Connector 10
CN3 2-pin ATX Power In Connector 10
CN4 External Reset Button 10
CN5 PS/2 6-pin Mini DIN KB/MS Connector 18
CN6 RJ-45 Connector 14
CN7 15-pin CRT Connector 12
CN8/CN9/CN12/CN11 COM 1~COM 4 Connector (5x2 header) 17
CN10 TV-Out Connector 14
CN13 IDE Connector 16
CN14 CompactFlash Connector 20
DIM1 SO-DDR Socket 10
FN1 Fan Power In Connector 10
J1 Line In Connector 15
J2 System Front Panel Control 11
J3 GPIO Connector 19
J5/J6 USB Connector 17
JP1 MIC In/Audio Out Connector 15
LCD1 44-pin Panel Connector 12
U32 PCMCIA Connector 20
PC1 Mini PCI Connector 20
3.5 Configuring the CPU
The HS-2606 v2.0 embedded with a ULV Intel® Celeron® processor
400/650MHz. User don’t need to adjust the frequently and check speed
of Intel® processor.

10
3.6 System Memory
The HS-2606 provides one 200-pin SO-DDR socket at locations DIM1.
The maximum capacity of the onboard memory is 1GB.
3.7 CMOS Data Clear
The HS-2606 has a Clear CMOS jumper on JBAT1.
 JBAT1: Clear CMOS
Options Settings
Normal Operation (default) Short 1-2
Clear CMOS Short 2-3
1
3
IMPORTANT: Before you turn on the power of your system, please
set JBAT1 to Short 1-2 for normal operation.
3.8 Power and Fan Connectors
HS-2606 provides one 4-pin power connector at CN1. And one 2-pin
ATX power in at CN3.
+10~+30V wide range single DC power in can make HS-2606 suitable
for all kinds of environments even more.
 CN1: 4-pin DC Power In Connector
PIN Description
1 +7~+26V
2 GND
3 GND
4 +7~+26V
14
 CN2: External VCC Out Connector
PIN Description
1 VCC
2 GND
3 GND
4 VCC

11
 CN3: 2-pin ATX Power In Control
PIN Description
1 PS_ON
2 5VSB 21
 CN4: External Reset Button
PIN Description
1 RST_SW
2 GND
3 GND
4 GND
 FN1: Fan Power In Connector
PIN Description
1 GND
2 +5V
3 N/C
13
3.9 System Front Panel Control
 J2: System Front Panel Control
PIN Description PIN Description
1 330ΩPull +5V 2 Speaker
3 HDD LED 4 N/C
5 PW Button 6 GND
7 GND 8 330ΩPull +5V
9 Reset Switch 10 330ΩPull +5V
11 GND 12 PW_LED
Connector J2 Orientation
1
3
5
7
9
11
2
4
6
8
10
12
Reset
Button
PWR
LED
HDD LED
PWR
Button
Speaker

12
3.10 VGA Controller
The HS-2606 provides two connection methods of a VGA device. CN7
offers a single standard CRT connector while LCD1 is the 44-pin panel
connector. VIA CLE266 VGA chipset shared main memory 8/16/32MB,
and provides high quality DVD video playback. HS-2606 also provides
Hardware MPEG-2.
CRT resolution is up to 1400 x 1050 @60Hz, Panel resolution is up to
1400 x 1050. And LCD at 32bpp is not supported with SXGA + Panel.
 CN7: 15-pin CRT Connector
PIN Description PIN Description
1 Red 2 Green
3 Blue 4 N/C
5 GND 6 GND
7 GND 8 GND
9 N/C 10 GND
11 N/C 12 SDA
13 HSYNC 14 VSYNC
15 SCL
1
515
10
611

13
 LCD1: 44-pin Panel Connector
PIN Description PIN Description
1 N/C 2 N/C
3 GND 4 GND
5 VLCD 6 ENAVDD
7 ENPVEE 8 GND
9 GFPD0 10 GFPD1
11 GFPD2 12 GFPD3
13 GFPD4 14 GFPD5
15 GFPD6 16 GFPD7
17 GFPD8 18 GFPD9
19 GFPD10 20 GFPD11
21 GFPD12 22 GFPD13
23 GFPD14 24 GFPD15
25 GFPD16 26 GFPD17
27 GFPD18 28 GFPD19
29 GFPD20 30 GFPD21
31 GFPD22 32 GFPD23
33 N/C 34 N/C
35 SHFLCK 36 GFPVS
37 GFPDEN 38 GHPHS
39 GND 40 FPBKLP
41 N/C 42 N/C
43 N/C 44 N/C
12
43 44
NOTE: Please set the proper voltage of your panel use JP2 before proceeding
on installing it.
The HS-2606 has an onboard jumper that selects the working voltage
of the flat panel connected to the system. Jumper JP2 offers two
voltages setting for the user.
 JP2: Panel Voltage Select
Options Settings
+3.3V (default) Short 1-2
+5V Short 2-3
1
3

14
3.11 TV-Out Connector
The HS-2606 can supports TV-Out function which input could be up to
800 x 600 graphics resolutions. World Wide Video standards are
supported including NTSC-M (North America, Taiwan), NTSC-J
(Japan), PAL-B, D, G, H, I (Europe Asia), PAL-M (Brazil), PAL-N
(Uruguay, Paraguay) and PAL-NC (Argentina).
 CN10: RCA Connector (for TV-Out function)
PIN Description
1 TVCVB
2 GND
3 GND
4 GND
3.12 Ethernet Connector
The HS-2606 provides two external RJ-45 interface connectors.
Please refer to the following for its pin information.
 CN6: RJ-45 Connector
PIN Description
1 TX+
2 TX-
3 R/C GND
4 N/C
5 N/C
6 R/C GND
7 RX+
8 RX-
1
8