HOW TO PERFORM PAIRING
Before you can dial out from the car stereo, you must first perform PAIRING. Pair-
ing is a procedure used to connect 2 Bluetooth devices together.
1. Press and hold AUDIO button for 2 seconds.
2. Press AUDIO button repeatedly until “PAIRING” displays.
3. Press and hold AUDIO button to engage paring mode. “PAIRING” blinks on
the display.
4. Turn on the Bluetooth feature of your mobile phone. Perform “Add Bluetooth
device” from your mobile phone. The mobile will search for any Bluetooth
devices within the range. Select “BHF207C” and enter Passkey: “0000” to con-
nect to the car audio. (Please refer to the instruction manual of your mobile
phone for Bluetooth Pairing).
5. The LCD will display “PAIRED” after successful pairing.
Note:
• If “DISCONN” shows instead of “PAIRING”, it means the head unit currently
is paired with another device. Press and hold AUDIO button to disconnect
the connection and perform steps above again.
• “BHF207C” is the Bluetooth device name of the car stereo.
• Refer to your cellular user manual for the proper procedures of pairing
Bluetooth devices.
Audio Streaming
If your phone is “A2DP” format compatible, then you can play music in your
mobile and the sound will be transferred to car head unit.
1. Make sure your mobile and the unit is properly paired and connected.
2. Play the music through your mobile music player software.
3. Press SOURCE repeatedly until “BT-PLAY” appears in the display. The sound will be transferred
to the head unit.
Making Calls Using the Dial Keypad
You can make calls directly from the supplied Dial Keypad. Before you make calls, make sure that
the devices are properly paired and the keypad cable properly connected to the back of the head
unit.
1. Press PHONE button or press and hold (*) on the keypad.
2. Enter the phone number via the keypad and press button to dial out. Press button to
make corrections when entering numbers.
3. Press button to end call.
Tips: Press PHONE on the head unit is the same as press and hold (*) on the keypad.
Answering / Hanging Up
To answer a call, press the button on the dial keypad. Speak directly to the keypad�s micro-
phone. Once you have finished your conversation, press the button to hang up.
Calls (Outgoing, Incoming)
The unit stores all the incoming and outgoing calls. Use this feature to check the numbers and make
calls from it.
“OUT NUM” – outgoing calls made through the dial keypad.
1. Press PHONE then press and hold AUDIO button for 2 seconds. “OUT NUM” displays.
2. Press and hold AUDIO button again.
3. Rotate volume knob to search for entries and press to call.
“IN NUM” – incoming calls received.
1. Press PHONE then press and hold AUDIO button for 2 seconds.
2. Press AUDIO button repeatedly until “IN NUM” displays.
3. Press and hold AUDIO button again.
4. Rotate volume knob to search for entries and press to call.