
• Ensure water doesn't enter the motor part while cleaning the blade.
• Clean the appliance aer every use. Unplug the wire and rinse the guard and blade under running water.
• Cut/Chop hard fruit materials such as raw vegetables and fruits into small pieces.
• Do not use the blender connuously for more than 3 minutes.
• To keep the blender clean from oily or small parcle maer, immerse the blender rod in jar/bowl
of soap water and turn it on at Slow Speed.
• Clean the measuring jar, in the dishwasher or in warm water with some washing-up liquid.
• Put a drop of edible oil at sha once a month or if blender is not used for long me.
ATTACHMENT
Wall-Mounting
Stand
Holding the
plasc handle
of the blade,
insert into the
sha of the chopper bowl
Cut/break
ingredients
into smaller
pieces. Fill the
jar with
ingredients.
Hold the
chopper bowl
with one hand,
with the other;
turn the upper
housing clockwise unl it locks firmly
to the chopper bowl
Place the
blender on
the four slot
driven collect
on the upper
housing keeping the blender vercal.
Turn on the blender and ingredients will be chopped
or grated in seconds To unlock the housing, hold the
chopper bowl in one hand, with other hand;
turn it an-clockwise
Used to grind small quanes of spices.
Put the ingredients to be ground in the chutney jar.
The Blade is loaded first and then the other ingredients are added
The lid is closed and blender (without blade) is placed on it.
First use slow speed & then high speed to obtain uniformly blended
Chutney Cut/break ingredients into smaller pieces for best results
Chutney Attachment
Chopper Attachment
Sturdy PP wallmounng stand, to hold the blender on the
wall and storage for different blades
It is lightweight and compact and takes less space on
your kitchen shelf.
HOW TO USE YOUR BLENDER
The hand blender is intended for blending liquids, e.g. dairy products, sauces, fruit juices, soups, mixed
drinks and shakes, for making baby food etc.
1. Aach the blade on blender sha. Do not push too hard.
2. Put the ingredients in the beaker.
5. Pressing the low or high speed buon to switch on the appliance
3. Plug it into the wall outlet.
6. Move the appliance slowly up and down and in circles to blend the ingredient.
7. Unplug the blender before changing or cleaning any accessories.
4. Let hot ingredients cool down before you process them
(max. temperature 60°C).
CARE & CLEANING OF THE BLENDER