
SAFETY FIRST
WHEN USING ELECTRICAL APPLIANCES, YOU SHOULD ALWAYS BE AWARE OF
AND FOLLOW BASIC SAFETY PRECAUTIONS INCLUDING:
1.
before cleaning.
2.
To protect against the risk of injury due to electric shock, do not immerse the base of the blender in
Power supply is region specific, please check the information panel on the rear of the machine to
ensure you are using the correct power voltage and frequency.
water or any other liquid.
3.
This appliance is NOT intended for use by children or people with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they are supervised or have been
given instruction concerning the use of the appliance by a person responsible for their safety.
DO NOT blend carbonated liquids. Blending carbonated liquids may result in injury.
Do not use the blender for anything other than food or beverage preparation.
4.
5.
NEVER place hot ingredients (above 65°C) into the blending jug.
6.
DO NOT blend liquids for more than 3 minutes.
The blender requires a 1-minute rest after continuous operation for 3 minutes.
7.
Avoid coming into contact with moving parts.
8.
DO NOT operate the blender if the power cord or plug are damaged, or if it malfunctions or is
damaged in any way. Return the appliance to the nearest authorized service facility for inspection
9.
NEVER leave the blender unattended while it is operating.
10.
DO NOT blend liquids for more than 3 minutes.
The jug will melt over 95ºC.
11.
DO NOT let the cord hang over the edge of the table or counter, or touch hot surfaces.
DO NOT immerse the motor base in water or any other liquids due to the risk of electrical shock.
Please use the tamper to aid with blending when the blender is running at high speeds.
12.
Keep hands and utensils out of the container while blending to prevent the possibility of severe
personal injury and/or damage to the blender. A plastic scraper may be used, but must be used
only when the blender is not running.
13.
Always handle the blades carefully as they are quite sharp.
14.
Always operate the blender with the lid in place.
15.
DO NOT clean the blender using a water jet machine. See Cleaning and Maintenance for proper
cleaning instructions.
16.
Always operate the blender with the cup pad properly in place.
17.
To avoid overflowing, do not fill above the MAX FILL LINE. If the cup overflows remove enough liquid/
ingredients until below the MAX FILL LINE, and continue blending. Do not operate if overflowing.
DO NOT use outdoors.
18.
DO NOT operate your appliance in an appliance garage. When storing in an appliance garage,
always unplug the unit from the electrical outlet. Not doing so could create a risk of fire, especially if
the appliance touches the walls of the garage or the door touches the unit as it closes.
19.
20.
21.
23.
22.
24. Ensure the cup coupler and motor coupler are aligned and engaged before operating. If unable to
25. Do not use attachments or accessories other than those supplied with or designed specifically for
your blender.
engage, remove the cup and its content, and then try again.
2 // OPTIMUM G2.6 SLIM PLATINUM SERIES BLENDER