
67
User manual User manual
STORAGE
Ensure all pieces are clean and dry before storing. Store appliance in a dry, clean place. Never wrap
the cord tightly around the appliance, as this could place undue stress on the cord where it enters
the appliance and cause it to fray and break. Keep it loosely coiled.
2-YEAR LIMITED WARRANTY (Applies only in Canada)
This warranty covers any defects in materials and workmanship for a period of two (2) years from
the date of the original purchase. Please retain your original receipt as a proof of the purchase date.
Any complaints must be registered within the warranty period. The product will be repaired, replaced
(parts or entire appliance) or refunded at our sole discretion. Shipping charges may apply.
This warranty does not cover normal wear of parts or damage resulting from any of the following:
negligent use or misuse of the product including failure to clean the product regularly, use for
commercial purposes, accident, use on improper voltage or current, use contrary to the operating
instructions, disassembly, repair or alteration by anyone other than a authorized
service agent.
Please do not return this product to the store. For assistance, please contact 1-833-751-4101.
If you have any questions regarding this product, please contact our customer service:
:::by phone: 1-833-751-4101
3- Before each use, always ensure the sealing gasket is fully inserted into the groove of the blade
base by pressing all around on its entire surface. Attach the desired blade base to the cup,
ensuring that it is securely screwed and tightened to the cup.
4-Place the cup assembly onto the motor base aligning the icon on the blade base with the
arrow icon on the motor base. Turn clockwise to securely lock in place aligning the arrow on
the motor base with the icon on the blade base.
CAUTION: The appliance has a locking mechanism that prevents the appliance from operating
and the blade from turning if the cup is not securely screwed to the blade base.
5- Plug the power cord into a 120V wall outlet. Be certain the cup assembly is securely locked to
the motor base before operating the appliance.
6- Select the desired speed control. Press the PULSE button a few times for short bursts if
processing ice or frozen fruits/vegetables. For continuous blending, press the LOW speed or
HIGH speed button.
7- Once desired consistency is obtained, press the PULSE button to turn OFF the appliance and
unplug from electrical outlet.
8- Wait for the blades to stop rotating then, remove the cup assembly from the motor base.
Unscrew the blade base from the cup and replace with the travel lid to drink on the go.
9- Clean all parts immediately after each use.
WARNING: Do not operate the appliance for more than 2 minutes continuously. Allow the
appliance to rest 1 minute between each use.
NOTE: The cups may become scratched when used for grinding coee and spices. This does not
aect the performance of the product.
CLEANING
IMPORTANT: Unplug before cleaning and ensure the blades have stopped rotating before
handling or cleaning the appliance.
:::Disassemble all parts. Remove the sealing gasket only if necessary.
:::Wash all removable parts in hot soapy water after each use (or place in the dishwasher).
Rinse and dry thoroughly.
:::NEVER immerse the motor base, the electrical cord or plug in water or any other liquids.
If needed, wipe the motor base with a damp cloth and dry thoroughly.
:::Reassemble the blender for compact storage. Ensure the sealing gasket is properly installed
in place.
:::For safe storage, screw the blades with the cups.
WARNING: Blades are sharp, handle with care while cleaning. To avoid injuries, use a brush to
clean the blades. Do not touch blades with bare hands.
NOTE: Do not use abrasive cleaners or scouring pads or any other object that could scratch.