Rohnson Titanium Pro R-5335 User manual

Blender R-5335
EN
1
Instructions Manual
Blender “Titanium Pro”R-5335

Blender R-5335
EN
2
IMPORTANT CAUTION
Read these instructions for use carefully before using the appliance and
save them for further reference.
•Check if the voltage indicated on the base of the appliance corresponds to the
local mains voltage before you connect the appliance.
•This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the
appliance.
•Do not use the appliance when the mains cord, the plug or other components
are damaged.
•Make sure all parts are correctly mounted before you switch on the appliance.
•Never reach into the feeding tube with your fingers or an object while the
appliance is running. Only the pusher is to be used for this purpose.
•Do not remove the pulp container when the appliance is in operation.
•Do not touch the small cutting blades in the blades in the base of the filter.
•Always unplug the appliance after use.
•If the supply cord is damaged, must be replaced by the manufacture or its
service agent or a similarly qualified person in order to order to avoid a
hazard.
•The water temperature should not be over 60℃when cleaning the unit.
•Do not run this unit long-time, otherwise the inner parts will be damaged.
•Do not put the whole or parts of body into water.

Blender R-5335
EN
3
•Care shall be taken when handling the sharp cutting blades, emptying the
bowl and during cleaning.
•Do not use the appliance if the rotating sieve is damaged.
•Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
GENERAL DESCRIPTION
1. Measuring cap
2. Lid
3. Glass jug
4. Stirring blade base
5. Stirring cup base
6. Motor base
7. Body
8. Panel
9. Bottom
10. Feet

Blender R-5335
EN
4
BEFORE FIRST USE
•All parts of the blender are to be thoroughly cleaned before being used for the
first time.
•Connect the device to the mains supply.
INSTRUCTION FOR USE
•Check the switch knob on the”0” bit pointer position.
•Put the motor base, and button clockwise
•Place the foodstuff you wish to process into the cup.
•Put the lid on the cup and close securely. Place the measuring cap into the
hole in the lid.
•Switch on the motor base:
Α. Speed setting Use
1 (Low) for light usage with liquids
2 (High) for more solid consistency –for mixing liquids and solid
foodstuffs
0 stop operation
P (Pulse setting) short, powerful impulse movements
ΝΒ: The switch does not permanently engage in the” P ” setting. You have to
hold the switch in the “P” setting or push it repeatedly.
NB: Operate the motor for a maximum of 2 minute or alternating 2 minute on,
then 2 minute off to prevent overheating or consequent damage.

Blender R-5335
EN
5
INSTRUCTION FOR CLEANING
❖The appliance is easier to clean it you do so immediately after use.
❖Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to
clean the appliance.
1. Switch the appliance off, remove the plug from the wall socket and wait until
the blade has stopped running.
2. Turn blender cup to loosen counter - clockwise.
3. Clean these parts with the cleaning brush in warm water with some washing-
up liquid and rinse them under the tap.
4. Clean the motor unit with a damp cloth.
Never immerse the motor unit in water nor rise it under the tap.
Specifications:
•Model: R-5335
•Rated Voltage: AC220-240V
•Rated Power: 1300W
•Rated Frequency: 50/60Hz
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a
dealer providing this service.

Blender R-5335
EN
6
Disposing of a household appliance separately avoids possible negative
consequences for the environment and health, deriving form inappropriate disposal
and enables the constituent materials to be recovered to obtain significant savings in
energy and resources. As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled dustbin.