Boston Acoustics PRO60 SE User manual

Specifications Pro60 SE
Nominal Size 61/2"
RMS Power Handling 125 watts
Peak Power Handling 250 watts
Nominal Impedance 3 ohms
Frequency Response 50Hz–22kHz (±3dB)
Sensitivity 90dB (1watt @ 1meter)
High Performance 6 1/2-inch Component Speaker System
# Description Quantity
1 Pro60 SE Woofer 2
2 Type-M1 1" Alloy Dome Tweeter 2
3 Pro60 SE Woofer Crossover 2
4 Pro60 SE Tweeter Crossover 2
5 Tweeter Grille 2
6 Tweeter Axis-Mount 2
7 Tweeter Flush-Mount 2
8 Tweeter Angle-Mount (top) 2
9 Tweeter Angle-Mount (bottom) 2
10 5 x 7" (127 x 177mm) Adapter 2
11 6" (160mm) Adapter 2
12 61/2" (165mm) Adapter 2
13 Woofer Gasket 2
not shown Woofer Hardware Package 1
14 Boston Hex Tool 1
15 Woofer Grille 2
16 Small Gold Terminal 2
17 Large Gold Terminal 2
18 Crossover Bridge 2
19 1/2" (13mm) Spacer 2
not shown 11/16" Socket Button Head Screw 6
20 1/4" Socket Button Head Screw 6
not shown Tweeter Hardware Pack 2
21 1" Socket Head Screw 4
22 Spring Clips 4
23 Terminated Tweeter Wire 2
24 Axis-Mount Stand-Off 2
25 3/8" Pan Head Screw 2
26 1" Flat Hex Head Screw 2
not shown 1/2" Pan Head Screw 2
27 11/8" Socket Button Head Screw 16
28 11/2" Flat Hex Head Screw 2
29 1/2" Self-Tapping Screw 4
30 1" Self-Tapping Screw 4
31 3/32" Hex Bit 1
2 1/2”
63mm
5 1/4”
133mm
7”
177mm
1 7/16”
37mm
1 5/8"
40mm
6 1/2"
165mm
3 11/16"
94mm
2 1/16"
52mm
1 1/2"
38mm
2"
51mm
1 3/4"
45mm
3/4"
19mm
1 1/8"
27mm
Boston Acoustics, Inc. 300 Jubilee Drive, Peabody, MA 01960 USA T: 978.538.5000 F: 978.538.5100 W: bostonacoustics.com
Boston, Boston Acoustics, and the Boston Acoustics logo are registered trademarks of Boston Acoustics, Inc.
Specifications are subject to change without notice.
© 2008 Boston Acoustics, Inc. All rights reserved. Covered by patents issued and/or pending. 142-003255-0

Crossover - Single Input
Signal Bridge Crossover - Daisy Chain Crossover - All Connected Crossover - Connection
Crossover - Bi-Wire / Bi-Amp
21
26
14
14
24
17
3
4
3 4 3 4 3 4 3 43 4 3 4 3 4 4
33
4
16
1
6
2
5
Tweeter
Woofer
Axis-Mount Tweeter Attenuation Axis / Component Configuration
6-inch (160mm) Adapter
Key on Back Page
6½-inch (165mm) Adapter 5 x 7-inch (127 x 177mm) Adapter
Optional ½-inch (13mm) Spacer
18
13
13
11
13
19 19
13
12
13
10
15
15
31
31
20 20 27
27
28
Angle-Mount Tweeter Installation
23
29
8
30
9
2
5
23
22
7
25
2
5
Flush-Mount