BOTTEGGA DEL FERRO Lucernario aerante User manual

Technical specications
Electric fan type “IN-OUT” for Lucernario aerante
Product description
Electric fan 24V powered which can be installed in correspondence with the air intakes of the
Lucernario aerante. This electric devise has two fans for the pulling out or letting in of air.
Materials
AISI 304 stainless steel - plastic
Contents Technical sheet
Page 2 - Technical Specications
Page 3 - Installation

Performance
Data provided by the manufacturer
70 m/hMaximum air ow rate
Not compatible with models of Lucernario aerante with "Open-Close" air intakes.
Compatibility
Page 2 of 4
Technical specications
Electrical operating data (for each fan)
Wiring
Data provided by the manufacturer
Voltage
Power supply type
Energy consumption
24 V
DC
6.2 W
260 mA
+ IN
Power consumption
Brown wire
+ OUTGrey wire
-Black wire
GNDYellow-green wire
ATTENTION
Operate only one fan at a time.

Page 3 di 4
Technical specications
Installation
User 1: From the inside, place the counter
plate and mark the holes with a marker.
User 1: Drill the micro-perforated mesh next
to the marks.
User 1: Insert the cleaner with the vent facing
downwards and keep it pressed.
User 2: From the outside, insert the counter
plate.
User 2: Screw the self-locking nuts with your
ngers.
User 2: Tighten the nuts with the wrench.
Proceed with wiring.

DSASPINOUT - 23022021 ©Bottega del ferro
Bottega del ferro
Via del Boscone, 8
25014 Castenedolo (BS) Italia
T. [phone]
F. [phone]
[e-mail]
www.bottegadelferro.net
www.lucernarioaerante.it
®
Thank you for purchasing our Lucernario aerante accessories.
The product and the Lucernario aerante® brand are property of Bottega del ferro.
Bottega del ferro reserves all rights to modify the characteristics of the products shown without prior notice.
This document and all the others relating to the products Lucernario aerante and Lucernario aerante INOX
are available on the websites www.lucernarioaerante.it and inox.lucernarioaerante.it.