Boutique S5050 User manual

S5050 LED STROBE
LED BLINDER
Instruction Manual
Ver1.0
0

Thank you for purchasing this product.
Please carefully read this anual before using this spot-
light
Responsibility :
On no account the Electroconcept company shall be held responsible for any damages of any nature
whatsoever, notably the operating loss, destruction of consumables (tape, disc, CD) or any other finan-
cial loss resulting from the use or the impossibility to use your e uipment. In addition Electroconcept
shall not be held responsible for damages due to an improper use of this product.
Warranty :
Electroconcept products have a 2 years manufacturer warranty. The e uipment shall be returned pre-
paid (at the customer's own expense). Any freight collect will be refused. The e uipment shall be re-
turned in its original packaging. The e uipment's restitution will be at our own expense.
Are excluded from warranty: damages due to fault, negligence, lack of maintenance by the user (bro-
ken, burnt, heated, wet, sandy...etc devices), already installed devices of which the failure would origi-
nate from an improper installation or use by the customer.
This product must be used following the technical specifications mentioned below :
Technical specifications:
Voltage：AC230V ±10％
Fre uency：50Hz～60Hz±10％
Power：65 W
Weight : 1,3 Kgs
Dimensions 245x100x150 mm
Leds number: 138 5050 WHITE
DMX channels：2
Control signal：DMX-512 signal
Control mode：DMX-512signal control、Auto-mode、music、master and slave
1

Environ ent: indoor use only
DMX-512 connection:
This product uses 3-pin XRL connectors for the DMX512 connection:
Pin 1: Ground, Pin 2 : Data (-), Pin 3 : Data (+).
Connection between fixtures:
To modify the projector mode, press the mode controller’s buttons according to the following method:
Values and mode selection: se the MODE/ESC key, browse through the menu with the P and DOWN
keys and confirm your selection with ENTER
2

MENU
ADDR: A001-A512 DMX address
SLND: Master/sla e, NAST as sla e select SL1 /SL 2/ SL 3/SL 4 for the sla e number
SHND: Strobe type of effect SH0 to SH6
STOB: Strobe speed 0-255
DIMM: Strobe power 0-255
LED: on /off
FHRS: Number of hours use
DMX Co nt rol:
Channel Value Function
10
1-255
Di er
Off
0-100% dimmer
20-255
Strobe
Speed
WARNING !
This product is not meant for a domestic use.
After unpacking the product, packaging materials (plastic bags, polystyrene, foam,…) must not be left within
children’s reach, this may be dangerous.
This product must be only used by an adult. Do not let a child use it or play with it.
Do not put this product under these conditions:
- In a damp location
- In a location subject to shock and vibrations
- In a location subject to extreme temperatures (45°C/113°/ 2°C/35.6°F )
Do not let any water, flammable li uids or metal objects enter the product.
3

In the event of li uids entering the product, unplug the power cable immediately.
Stop immediately using the device in the event of a serious functioning problem, and contact your reseller for
verification, or contact us directly.
Do no t o p en th e p rodu ct. A ny op era ti on in sid e t h e co ns ole mu st be d o n e by a qua li -
fie d t ec hni ci a n.
4