Boyel Living MG426 User manual
2
Catalog
DESCRIPTION................................................................................................................................................................................3
IMPORTANT SAFEGUARDS..........................................................................................................................................................4
FOR THE FIRST TIME................................................................................................................................................................... 5
INSTRUCTION FOR USE...............................................................................................................................................................6
ASSEMBLING................................................................................................................................................................................6
MINCING MEAT............................................................................................................................................................................8
REVERSE FUNCTION.......................................................................................................................................................... 8
MAKING KEBBE...........................................................................................................................................................................9
MAKING SAUSAGE................................................................................................................................................................... 10
SALAD MAKER FUNCTION..................................................................................................................................................... 11
INSERT / REMOVE THE SALAD MAKER.......................................................................................................................11
MAKING COOKIES.................................................................................................................................................................... 12
DISASSEMBLING....................................................................................................................................................................... 13
CLEANING...................................................................................................................................................................................14
CORRECT DISPOSAL OF THIS PRODUCT.............................................................................................................................14
3
DESCRIPTION
1. Food pusher
11-12.Sausage attachment
2. Hopper plate
13.Locking knob
3. Tube
14.Motor housing
4. Feed screw
15. ON/R switch
5.Cutting blade
16-17. Cookie maker set
6. Cutting plate(Coarse)
18.Pusher
7.Fixing ring
19.Tube
8.Cutting plate(Medium)
20.Slicer
9.Cutting plate(Fine)
21.French frier cutter
10.Kibbe attachment
22.Masher
4
IMPORTANT SAFEGUARDS
Household use only. Do not use for industrial purpose.
Unplug from outlet when assembling and disassembling the unit.
Close supervision is necessary
Children should be supervised to ensure that they do not play with the appliance.
When carrying the unit be sure to hold the motor housing with both hands. Do not carry
the unit by holding only the hopper plate or head.
Do not fix the cutting blade and cutting plate when using kibbe attachment.
Never feed food by hand. Always use food pusher.
Do not grind hard food such as bones, nuts, etc.
Do not grind ginger and other materials with hard fiber.
Continuous running of meat grinder should be not more than 5 minutes.
Reverse function is prohibited while the appliance is operating (For example
switch“ON”knob to“R”knob or on the contrary), wait at least one minute until grinder has
come to a complete stop，otherwise it may cause an abnormal noise, vibration or a
transitory electric spark in the appliance. It could result easily damage to appliance and
make a user frightened.
After use, there would be a little food left in the grinder head. This is normal. There might
be a bit of black metal powder adhering to the food ground in the end. Please pick them
out and throw away, do not eat them.
To avoid jamming, do not force to operate the unit with excessive pressure.
When the circuit breaker activates, do not switch on.
Never try to replace the parts and repair the unit by yourself.
Children or handicapped should be supervised to ensure that they do not play with the
appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
5
FOR THE FIRST TIME
Check that voltage indicated on the rating label corresponds the mains voltage in your
home.
Wash all parts (except body) in warm soapy water.
Before plugging in, ensure the “ON/ OFF” switch is turned to “OFF” position.
6
INSTRUCTION FOR USE
ASSEMBLING
Holding the head and insert it in the inlet with one hand, revolves toward left(fig.1,fig.2).
Place the feed screw into the head, long end first, by turning the feed screw slightly until it
is set into the motor housing(fig.3).
Place the cutting blade onto the feed screw shaft with the blade facing the front as
illustrated (fig.4). If it is not fitted properly, meat will not be ground.
Place the desired cutting plate next to the cutting blade, fitting protrusions in the slots
(fig.5).
Support or press the centre of the cutting plate with one finger then screw the fixing ring
until tight with another hand (fig.6). Do not over tighten.
7
Place the hopper plate on the head and fix into position.
Locate the unit on a firm place.
The air passage at the bottom and the side of the motor housing should be kept free and not
blocked
8
MINCING MEAT
Cut all foods into pieces (Sinewless, boneless and fatless meat is recommended,
approximate size :20 mm x 20 mm x 60 mm) so that they fit easily into the hopper
opening.
Plug in and Press the “ON/OFF” button to operate the machine.
Feed foods into the hopper plate. Use only the food pusher (fig.7).
After use switch the unit off and unplug it from the power supply.
REVERSE FUNCTION
In case of jamming switch the appliance off by pressing the “ON/ OFF” to turn off.
wait at least one minute until grinder has come to a complete stop. Then,
press the “R” switch to reverse.
Feed screw will be rotating in the opposite direction, and the head will get empty.
If it doesn't work, switch the unit off and clean it.
9
MAKING KEBBE
Insert the worm shaft into the cutter housing, the
1. plastic end first.(fig.8)
Place the cone in the cutter housing.
Place the former on the cutter housing and screw
the ring on the cutter housing.(fig.9)
2. Attach the cutter housing to the motor unit.
3. Place the tray on the upright part of the cutter housing.
4. Now the appliance is ready for making kebbe.(fig.10)
Feed the prepared kebbe mixture through the kebbe maker.
Cut the continuous hollow cylinder into the desired lengths
and user as required.
Kebbe is a traditional Middle Eastern dish made primarily of lamp and bulgur wheat which are
minced together to form a paste the mixture is extruded through the kebbe maker and cut into short
lengths . The tubes can then be stuffed with a minced meat mixture, the ends pinched together and
then deep fried.
10
MAKING SAUSAGE
1. Mince the meat. Insert the worm shaft into the cutter housing , the plastic end first.(fig.11)
Place the separator in the cutter housing. Place the sausage horn on the cutter housing and
screw the ring on the cutter housing.(Make sure the notches of the separator fit onto the
projections of the mincer head.)
2. Attach the cutter housing to the motor unit.
3. Place the tray on the upright part of the cutter housing.
4. Now the appliance is ready for making sausages.
Put the ingredients in the tray. Use the pusher to gently push the meat into the cutter housing.
Put the sausage skin in lukewarm water for 10 minutes. Then slide the wet skin onto the sausage
horn. Push the (seasoned) minced meat into the cutter housing. If the skin gets stuck onto the
sausage horn, wet it with some water.
11
SALAD MAKER FUNCTION
1. Pusher
2. Salad maker tube
3. Cutting roll - Slicing
4. Cutting roll - Shredding
5. Cutting roll - Mashing
INSERT / REMOVE THE SALAD MAKER
1. Hold the salad tube tilted slightly to the right and insert it into the motor unit, rotate the
salad tube turn to left in a quarter until the tube locked on product. Rotate it in reverse way
can release the salad tube accordingly.
2. Choose the cutting rolls as you need and insert it onto the salad tube as follow pic.
3. Put the vegetable onto salad maker tube to process the cutting, use pusher to push the food
during using, do not push the food by hand directly.
12
MAKING COOKIES
Before making cookies, knead the dough as your favor
Assemble the cookie maker attachment as per following fig.
Choose the shape that you want.
Put the dough on food tray, use pusher to push the dough into feeding tube.
13
DISASSEMBLING
Make sure that the motor has stopped completely.
Disconnect the plug from the power outlet.
Disassemble by reversing the steps from 6-1 pictures.
If the fixing ring is not easily removed by hands, please use tools（fig.12）.
To remove the cutting plate easily, place a screwdriver between the cutting plate and the
head as illustrated and lift it up (fig.13).
14
CLEANING
Remove meat, etc. Wash each part in warm soapy water.
A bleaching solution containing chlorine will discolor aluminum surfaces.
Do not immerse the motor housing in water, but only wipe it with a damp cloth.
Thinners and petrol will crack or change the color of the unit.
Wipe all the cutting parts by vegetable oil -wet cloth.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household wastes
throughout the US. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or contact the retailer where
the product was purchased. They can take this product for environmental safe recycling.
Manufacturer: Nutronic
Address: Floor 3 No.9 Building Chaoguang Road Ronggui, Shunde, FoshanCity
Guangdong, China
Made In China
Table of contents
