Boyo Vision VTB123HD User manual

BOYO ®
VISION
( Car Rear/Side View Camera
VTB123HD
Distance Grid for Rear View Camera
Can be used as Side View Camera
J

Car Rear (Side) View Camera
(usER MANUAL& INSTALLATION GUIDE)
Rearview camera image
Side viewcamera image
User Manual for Rear (Side) View Camera
• Rear view:
No-DVD-Player or DVD-OffCondition:
When re versing , the monitor is automatically
switched to display real-time backup images . After
reversing , it goes off automatically.
DVD-On Condition:
When reversing, the monitor is automatically switched
to display real-time backup image . After reversing, it
automati c ally switches back to display DVD video .
eSide view
Condition 1:
Left / Right side view camera is activated by Left/Right
steering lamp , when the steering l amp is turning on,
will activate the side camera automatically, and shut off
the side view camera when the steering la mp turning is
finished.
Condition 2:
Left / Right side view camera is activated by Intelligent
Switch Monitor , when the driver wants to see side view
condition, he just touches car monitor switch button ,
car monitor will di splay side view camera vision
automatically, no need to switching cameras
frequently .
A. Installation Guide for Rear View Camera
1. Select suitableflat position
nearthe license plate light
andmarkit.
2. Drill a hole according to the
camera diameter.
\ ~ J.\ @ \
~ J.\
3. Putthe camera intothe hole 4. After installation for rear view
and use yourtwo thumbs to
press It evenly for tight and
flat mounting.
I
Image sensor 114 " High Definition Color CMOS
SignalSystem
NTSC/PAL
EffectivePixels N: 720X480 ;P: 720X576
SensingArea
3.58mmx2.69mm
Sync System
Internal
Horizontal Resolution 480TVL
Min Illumination 0.2Lux
Diagonal Angle
120°/170"
Video Output
RCA,1.OVp-p, 75ohm
SNR Better
than 48db
WaterproofGrade
IP67
CurrentConsumption max450MA
Nomin alVoltage OC12V
WorkingEnvironment
-22 ' F- 149 ' f ,RH95%MAX
Night Visio n Optional
Image Swtlch
O pti ona l
Guard Line
Optional
Other Auto WhiteBlance, AGC, Backlight Compensati

(Condition 1)
B. Installation Guide for Side View Camera
C)
1. Remove side view mirror and its glass ,
select suitable flat position on side view
mirror and mark iL
I c::::::::J
Switch Box car mon it or (Condition
2)
Remove car door panel , and put the harness
through the car door , connecting the camera cables
with Intelligent Switch Box. then to car monitor
2. Drill a hole according lo the camera diameter ,
and put the camera Into the hole. press It
even ly for tight and flat mounting.
Intelligent Sw llCh Monitor
Ren,ove car door panel , and put the harness
through the car door, connecting the camera
cables with Intelligent Switch Monitor .
Wiring Diagram
Red
(RearView) to reverse light+
(FrontView) to ACC(DC12V)
to RCA video lnpu J' -J
Special function
D is tan ce Grid Line ON/OFF:
Connection to LCD ' Monitor
D efa ul t wit h Di stance Gr id lin e
OFF: This option can be realized by
cutt ing off the thin blue wire near cab le
harn ess from came ra body.
D
LCD Manito
ON: Re-connecting the thin bl ue wire,
camerawill bewithdistance g ri d lineagain.
"List of Contents" (camera x 1, manual x 1, w i re harness x 1, video cable x 1, hole saw x 1, warranty/registration card x 1 etc.)

IMPORTANT NOTES
1.The rear ( Side ) view camera functions technically as a driver assistance
device, which can not be taken as a substitute for the driver 's responsibility
when operating the vehicle .
2.To keep the ca mera work i ng properly , please clean the camera regularly to
free it from dirt , waterdrops , snowdrops , and etc.
3. Although the camera is designed to be waterproof , please do NOT use high -
pressure water jet to wash the cameras this may break the glass lens.
4.Keep the cables of the ca mera away from high temperature objects such as
engine or exhaust .
5.lf the camera model you have comes without in-built LED lights , please turn on
your license plate light for better vision at night or in dark areas.
6.The cameras are applicable to vehicles with DC 12V power output ( 10% higher
or lower allowed) , please do NOT use it on vehicles with DC 24V or other power
output out of this range, otherwise it is very likely to get burned. (Except some
commercial vehicle cameras that can support DC 12V-24V )
7.The specifications of the camera are subject to change without prior notice.
Enviromental Reference
• Old electronic devices don't belong into the bin .
• If you want to dispose this eq uipment later , remove all cables and send it back to supplieror
bring it to a collection point for old electronic devices.
• You can dispose t his device together with your old car , too . You don 't have to remove it in
this case .
• The packing can be recycled. Dispose the packing in a collecting system planned for it.