BR Remote Micro Joystick User manual

Micro
Joystick
Instructions
Quite simply - the simplest joystick ever!
All functions are controlled with the joystick which has 3 modes;
1. Pan & Tilt
2. Zoom & Focus
3. Menu Scroll & select
The modes are changed with the touch-down switch on the joystick. You can either tap the switch or hold
down the switch.
A tap is less than 0.5 second
A hold down is more than 0.5 second
The joystick powers up in Pan & Tilt mode. To toggle between Pan & Tilt mode and Zoom & Focus
mode, just tap the joystick switch.
To enter Menu Scroll mode, hold down the joystick switch. Then use the joystick to navigate the menu.
To exit Menu Scroll mode, hold down the joystick switch.
Connections;
DC jack : 12 –35v
XLR4: on a flying lead. This has both power & data for a remote head.
Note: The supplied power supply is 12w. This is enough for some cameras but not for others. Check the
power consumption of the camera you are using. Include the lens motors if fitted. If needed, use a 2nd
power supply near to the camera with a break-out cable.
There is a connector on the PCB inside which can be used to connect a Remote Camera Panel or other
equipment into the system. When data is being received the LED will flash.
Note: Not all functions apply to all camera models. Check camera specification for applicable functions.

Function List
Home Menu
Pan & Tilt Control
Tap
Zoom Focus Menu
Zoom & Focus
Hold Down
Menu Scroll
Joystick up/Down to Scroll
Joystick Left/Right to change value
Head Functions
Pan Gear
Tilt Gear
Josytick Ramp (Ramp up & Ramp down together)
Head Select 1 - 32
Preset Store
GoTo Preset
Tally On/Off
Set Home
User Setup
Change Head ID.
Reset Head to Factory
Calibrate Joystick
Head Reverse. Pan/Tilt directions, Swap Iris & Focus, Zoom direction, Focus direction
Select Camera Model - Marshall / Dreamchip
Camera Format –HD/4K, 24/25/29.95/50/60, i/p etc.
Reset ALL Heads to ID #01
CCU Functions
Iris –Auto / Manual / Adjust
Gain
Shutter
Dynamic Noise Reduction (DNR)
Detail
Gamma
Master Pedestal (MPED)
White Balance –Push, Manual, Full Auto White, 3/k2, 5k6
Red Gain
Blue Gain
Auto Focus On/Off
Note: Not all CCU functions are available on all cameras. Check camera data sheet for available
functions.
Further CCU functions are available but require a Remote Camera Panel. Ask your dealer or visit
website for details.
www.br-remote.com Tel: [phone] [e-mail]