
Page 3For technical questions, please call 1-888-866-5797.Item 59282
Charging Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Twist the adjustable band near the top of
the Flashlight to expose the USB port.
2. Insert the provided USB cable into
the USB port. See below.
USB
Port
3. Insert the other end of the cable
into a powered USB port.
4. The Charge Light Indicator will light up Red
during charging. After approximately 3 hours
the Charge Light Indicator turns Green,
indicating the Flashlight is fully charged and
ready for use. Unplug the USB cable.
NOTICE: Do not leave the Battery in a discharged state.
Charge the Battery every 3 months if the Flashlight
is not in use. This will keep the Battery from wearing
down and add to its life. Do not charge the Flashlight at
temperatures below 40° F. Battery is not replaceable.
Battery Removal
1. Unthread the base of the Flashlight.
Base
2. Remove the old battery.
3. Battery must be recycled or disposed
of properly. Do not open, crush, heat
above 140° F or incinerate.
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
NOTE: Before using Flashlight for the
first time, fully charge the Battery.
1. Press the Power button at the bottom of the light
once to turn on the high brightness mode.
2. Press again to switch the light
to low brightness mode.
3. To turn on TURBO mode, press and hold
Power button for three seconds. The light will
automatically return to high brightness mode
after about 40 seconds to preserve battery life.
4. Press a third time to turn the light off.
5. When finished using the Flashlight,
store indoors away from children.
NOTICE: Do not open the housing, there
are no user-serviceable parts inside.