Braven BVR-PRO User manual

GET TO KNOW YOUR BRAVEN
VOLUME UP/
SKIP TRACK
(press and hold)
VOLUME DOWN I
SKIP BACK (press
and hold)
POWER I PAIRING
STATUS LIGHT
BATTERY CHECK
BUTTON--~~~~~==~
BRAVEN CHARGING -i~ ~~-W(
PORT
BATTERY INDICATOR _
_s~~~ft::====:~
LIGHTS
20%- 40%- 60%- 80%- 100%
REMOVABLE
ACCESSORY PLATE
POWER SWITCH
-yr;~.,_ __ PAIRING I ANSWER-END
CALLI PAUSE-
RESUME MUSIC
RESET BUTTON
EXTERNAL USB
CHARGING PORT

TURN ON &BLUETOOTH PAIRING
1. Press the Power button for 2-3
seconds to turn on your BRAVEN
(BRV-PRO). Press the same
button again for 2-3 seconds to
turn your
BRA VEN off.
2. Activate Bluetooth®on the phone
or device you are pairing with (see
your device's instruction manual
for information on activating its
Bluetooth® settings).
3. Press andhold the PlayButton on
your
BRA VEN until you hear the
BRA VEN pairing sound.
4. Go to yourphone
or device's
Bluetooth®settings andselect
l'BRAVEN BRV-PRO" from the list.
5. Ifasked for a
passcode enter
11
0000"
Your BRA VEN will
remember the last 8
devices it has paired with.
NOTE: If your BRAVEN
does not have an active
Bluetooth®connection
and is left on, it will
shut itself off after
30
minutes. To restart your
BRAVEN you will need
to press and hold the
power button for 2-3
seconds.
ENGLISH BRAVEn ,)

CHARGING YOUR
BRAVEN
• Before using your
BRAVEN
for the first
time,
charge the
unit until all 5 Batteryindicator
lights are solid (not
flashing),
indicating a full charge
(typically 2 to 3 hours).
•
To
charge your
BRA
VEN,
plug
the included USB-to-Micro-
USB cable into a wall power
adapter (not included)
or
into
a powered USB port on a
computer. Plug the Micro-USB
connectorend
of
the cable
into
the
BRA
VEN
charging
port.
CHARGING EXTERNAL
DEVICES
Your
BRAVEN
is
designed to charge USB
devices that draw from
0.
3A
-1A (most
cell phones &mp3 players -tablets and
other2A devices cannot be charged
by
your
BRV-PRO)
using
the
full-sized
USB portlocated behind the cap.
To
use
external charging:
1.
Turn
your
BRAVEN
on.
2.
Plug
the
USB powercable that
came with yourphone, mp3
player,
or
othermobile device into the USB
port
on
your
BRA
VEN.
3.
Plug the otherend
of
the cable
into your mobile device, andit will
immediately begin charging.

WATERPROOF
FEATURES
• The BRV-PRO is IPX7 Waterproof,
and
is designed to withstand rainfall,
waterjets, andwater splashing.
• IMPORTANT-
To ensure your
BRA VEN BRV-PRO speaker
is prepared for use in a wet
environment, remove all cable
connections and tightly close the rear
water
cap. If the water cap is not
properlyclosed,
the BRV-PRO will
notbe water resistant.
SPEAKERPHONE
• Press the Answer-End button
on your BRA VEN to answer the
call over the speaker. Press the
Answer-Endbutton again to end
the call.

WARNINGS, CAUTIONS & LEGAL INFORMATION
To
reduce the risk
of
fire
or
electric shock,
do
notexpose the BRAVEN
to
rain
or
moisture while charging. The BRAVEN should
not
be
exposed
to
dripping
or
splashing, and objects filled with liquids, such as vases, should not be placed
on
or
near it while being
charged
or
charging other devices. As with any electronic products, use care not
to
sp
i
ll
liquids into any part
of
the product. Liquids
can cause a failure and/ora fire hazard. The power supply must be used indoors only. Make
no
mod
ifications
to
the product
or
accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance, and will void the
warranty. Do not place any flame sources, such as lighted candles, on
or
near
the
BRAVEN. The BRAVEN contains small parts that
may
be
a choking hazard and is not suitable for children under age 3. Do
not
continue charging the battery if it does not reach full
charge within
the
specified charging time. Overcharging may cause the battery
to
become
hot
, rupture,
or
ignite. Ifyou see any heat
deformation
or
leakage, properly dispose
of
the
battery. Do not attempt
to
charge the battery in temperatures outside the range
of
32°-104°F (0°-40°C). Ifthe battery begins
to
leak,
do
not allow the liquid
to
come
in contact with your skin
or
eyes. If contact has
been made, wash the affected area with plenty
of
water and seek medical attention immediatel
y.
Do not expose the product or
battery
to
excessive heat, including direct sunlight
or
fire and storage
or
use inside cars in hot weather, where it can be exposed
to
temperatures in excess
of
115°F (60°C). Doing so maycause the battery and powersupply
to
generate heat, rupture,
or
ignite. Using
the product in this manner also may result in a loss
of
performance and a shortened life expectancy. Extended exposure
to
direct
sunlight may damage the external appearance and material qualities. Do not step on, throw,
or
drop
batteries
or
the power supply
or
device,
or
expose them
to
a strong shock. Do
not
pierce, crush, dent,
or
deform the batteries
or
powersupply
in
any way. If either
becomes deformed, property dispose
of
it. Do not short-circuit batteries. Do not attempt
to
service the BRAVEN yourself. Opening
or
removing covers mayexpose you
to
dangerous voltages
or
other hazards and will void the manufacturer's warranty.
To
prevent risk
of
fire
or
electric shock, avoid overloading wall outlets, extension cords,
or
integral convenience receptacles. Your Bluetooth device
(mobile phone, music player, tablet, laptop, etc.) must support the A2DP Bluetooth profile in order
to
work
wirelessly with your new
BRAVEN speaker. The A2DP profile is supported
by
most
recent mobile products with built-in Bluetooth capability. Please refer
to
your device's usermanual
for
details and instruction regarding
the
Bluetooth profiles it supports. This device complies with part
15
of
the FCC Rules. Operation is subject
to
the following
two
conditions:
(1)
This device may not cause harmful interference, and
(2)
this
device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found
to
comply with the limits for a Class 8 digital device, pursuant
to
part
15
of
the
FCC Rules. These limits are designed
to
provide reasonable protection against harmful interference
in
a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference
to
radio
c~mmunications.
However, there is
no
guarantee that interference will not
occur
in a particular
BRAVEn
-_

installation. Ifthis equipment does cause harmful interference
to
radio
or
television reception, which can be determined by turning the
equipmentoff and on, the useris encouraged
to
try
to
correct the interference
by
one
or
more
of
thefollowing
measures:-
Reorient
or
relocate the
receiving
antenna.
-Increase
the separation between the equipment and receiver.
-Connect
the equipment into an
outlet
on
a circuit different from that
to
which
the
receiver is connected. - Consult the dealer
or
an experienced radio/TVtechnician
forhelp.
CAUTION: Any changes
or
modifications
not
expressly approved
by
the party responsible for compliance could void the user's
authority
to
operate the equipment.
FCC RADIATION EXPOSURE STATEMENT: This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This devicecomplies with Industry Canada license-exempt ASS standard(s). Operation is subject
to
the following
two
conditions:
(1)
this device may not cause interference, and
(2)
this device
must
accept any interference, including interference that maycause
undesired operation
of
thedevice. Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of
a
type and maximum (orlesser) gain approvedforthe transmitter
by
Industry Canada.
To
reduce potential radio interference
to
other
users, the antenna type and its gain should
be
so chosen thatthe equivalent isotropically radiated power
(e
.i.r.p.)
is
not
more than that
necessaryfor successful communication.
Uthium Battery installed is
not
intended
to
be
replaced
by
the USER.
CAUTION: Danger
of
explosion if battery is incorrectly replaced. Replace onlywith
the
same or equivalent type.
Where
the MAINS plug is used asthe disconnect device, the disconnect device shall remain readily operable.
The device meets'the exemption from the routine evaluation limits
In
section 2.5
of
RSS 102 and compliance with RSS-1
02
RF
exposure, users can obtain Canadian information
on
AF
exposure and compliance.
!eorrect
Disposal
of
this product. This marking indicates that this product should
not
be
disposed with otherhousehold wastes
throughout the
EU.
To
prevent possible harm
to
the
environment
or
human health from uncontrolled waste disposal, recycle it
responsibly
to
promote the sustainable reuse
of
material resources.
To
return your used device, please use the return and collection
systems
or
contact the retailer where the product was purchased.
(
E:
@This
productcomplies
wHh
California Energy Commission efficiency standards for consumer battery chargers.

BRAVEn
OUTFIT YOUR BRV-PRO
Download the BRV-PRO App for iOS and Android
devices to experience the available customization
options
for your BRV-PRO.
~- ~
Get 10°/o OFF your accessories when purchased through the BRV-PRO App
APP SCREENSHOTS
BRV-PRO
GET IT ON
,. ( ~ ( )( )~~k p!Cly
Apple and the Apple logo are trademarks of Apple Inc .,
registered in the U.S. and other countries . App Store is a service mark of Apple Inc .
Google Play is a trademark of Google Inc .
. l ~;r . ' . I [ . . ' , ·~ ' ~~~-'
' . . ' ' . ~ ' . ... ' .. \.
D braven.com 0 /bravenproducts (1 @bravenproducts - ~ - @bravenprod~~ts ·,._.: