Braven Lux User manual

BRAVEn
WARNINGS
.
CAUTIONS
&
LEGAL
INFORMATION

•
WARNINGS,
CAUTIONS
&
LEGAL
INFORMATION
To
reduce the risk of fire or electric shock,
do
not expose the BRAVEN to rain or moisture while charging. The BRAVEN
should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on or
near
it
while being charged or charging other devices. As with any electronic products, use care not to spill liquids into any
part of the product. Liquids can cause a failure and/or a fire hazard. The power supply must be used indoors only. Make
no modifications to the product or accessories. Unauthorized alterations may compromise safety, regulatory compliance,
and system performance, and will void the warranty. Do not place any flame sources, such as lighted candles, on or near
the BRAVEN. The BRAVEN contains small parts that may be a choking hazard and is not suitable for children under age
3. Do not continue charging the battery if it does not reach full charge within the specified charging time. Overcharging
may cause the battery to become hot, rupture, or ignite. If you see any heat deformation or leakage, properly dispose of
the battery. Do not attempt to charge the battery
in
temperatures outside the range
of
32•-1 04°F (0°·40°C). If the battery
begins to leak,
do
not allow the liquid
to
come
in
contact with your skin or eyes. If contact has been made, wash the affected
area with plenty of water and seek medical attention immediately. Do not expose the product or battery to excessive heat,
including direct sunlight or fire and storage or use inside cars
in
hot weather, where it can be exposed to temperatures
in
excess
of
115°F (60°C). Doing so may cause the battery and power supply to generate heat, rupture, or ignite. Using the
product
in
this manner also may result
in
a loss
of
performance and a shortened life expectancy. Extended exposure to direct
sunlight may damage the external appearance and material qualities.
Do
not step
on
, throw, or
drop
batteries or the
power
supply or device, or expose them to a strong shock. Do not pierce, crush, dent, or deform the batteries or
power
supply
in
any way. If either becomes deformed, properly dispose of
it.
Do not short-circuit batteries. Do not attempt to service the
BRAVEN yourself. Opening or removing covers may expose you to dangerous voltages or other hazards and will void the
manufacturer's warranty.
To
prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral
convenience receptacles.
Your
Bluetooth device (mobile phone, music player, tablet, laptop, etc.) must support the
A2DP
Bluetooth profile
in
order to work wirelessly with your new BRAVEN speaker. The
A2DP
profile is supported by mo.st recent
mobile products with built-in Bluetooth capability. Please refer to your device's user manual for details and instruction
regarding the Bluetooth profiles
it
supports. This device complies with part
15
of
the
FCC
Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the
FCC
Rules. These limits are designed to provide reasonable protection against harmful interference
in
a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used
in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not
occur
in
a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on
, the user is encouraged to try to
correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.
-Increase
the separation between the equipment and receiver.
-Connect
the equipment into an outlet
on
a circuit different from that to
which the receiver is connected. -Consult the dealer or
an
experienced radio/TV technician for help.
This device complies with Industry Canada license-exempt
RSS
standard(s). Operation is subject to the following
two
conditions: (1) this device may
not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation
of
the device. Under Industry Canada regulations, this radio transmitter
may only operate using
an
antenna
of
a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
To
reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated
power
(e.i.r.p.) is not more than that necessary for successful communication.
Lithium Battery installed is not intended to be replaced by the USER.
CAUTION: Danger
of
explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Where the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.
)'!'
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household
-wastes throughout the
EU
.
To
prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle
it
responsibly to promote the sustainable reuse
of
materi
al
resources.
To
return your used device, please
use the return and collection systems or contact the retailer where the product
was
purchased.
C!v
This product complies with California Energy Commission efficiency standards for consumer battery chargers.

(§) WWW.BRAVEN.COM/SUPPORT