BRAYER BR4902 User manual

Instruction manual
Инструкция по эксплуатации
Air purifier BR4902
Очиститель воздуха BR4902
brayer.ru

СОДЕРЖАНИЕ
EN......................................................................................................................................3
DE....................................................................................................................................13
RU ...................................................................................................................................24
KZ....................................................................................................................................35

3
EN
AIR PURIFIER BR4902
An air purier is an appliance intended for cleaning
the air from dust, microbes, pet hair, tobacco
smoke as well as allergens, bacteria and unpleasant
odours.
DESCRIPTION
1. Detachable front lid
2. Control/indication panel
3. Air intake grid (on both sides of the body)
4. Carrying handle
5. Air outlet grid
6. Air purity sensor
7. Body
8. Prelter
9. Carbon lter
10. HEPA lter
Control/indication panel (2)
11. «ON/OFF» button
12. Selection button for the high-speed operating mode
/ switching on the night operating mode «Speed»
13. Timer on/o󰀨 button «Timer»
14. Ionization mode symbol « »
15. Speed operation mode symbol « »
16. Timer operation symbol / digital symbols of timer
operation time « »
EN
17. Indicator of the need to clean / replace the lters «
»
18. Air purity symbol « » / digital symbols for
air purity
19. Button for on / o󰀨 turning of the ionization mode
«Ionization» / resetting the lter operation time
Remote control (26)
20. «ON/OFF» button
21. Ionization mode on/o󰀨 button «Ionization»
22. Selection button for the high-speed operating mode
/ switching on the night operating mode «Speed»
23. Button for resetting of the lter operation time
«RESET»
24. Timer on/o󰀨 button «Timer»
25. Remote control
26. Battery holder

4
EN
BK-05
Anion ON/OFF
Tim er Fan Speeds
ON/OFF
ANION
SPEED
RESET
TIMING
1
10 9 8
7
18 19
36
17
11
12
131415
16
20
21
22 24
25
26
23
25
4

5EN
Рiс. 1
Рiс. 3 Рiс. 4
Рiс. 7
Рiс. 5
Рiс. 8
Рiс. 6
Рiс. 2
8 9 10

6
EN
AIR PURIFIER FEATURES
Use lters and the air ionizer to clean the air in the room
(pic. 1).
Prelter (8):
• The ltering mesh retains dust particles which are >
0.2 mm, the lter is easy to clean and it can be used
multiple times.
Coal lter (9):
• Activated carbon absorbs unpleasant odors and
tobacco smoke, holds allergens, keeps pollen of
plants and animal hair.
НЕРА lter (10):
• The HEPA lter cleans the air from dust particles
with a diameter of less than 2.5 microns, holds plant
pollen, dangerous viruses and bacteria.
Air ionizer:
• The ionizer saturates the air with negatively charged
ions, which are necessary for the normal life of
people, animals and plants. In the ionization mode
you feel clean, almost mountain air.
«Air cleanness» smart sensor:
The smart sensor automatically sets the speed
operating mode of the air purier based on the indoor
air pollution. The state of air purity is indicated by the
indication « » and digital symbols:
- less than 19
- 20-29
- more than 30
ATTENTION! The air purier does not retain such
gases as carbonic oxide (CO) or radon (Rn) and
it cannot be used for air purifying in case of re or
dangerous chemical release.
SAFETY MEASURES AND OPERATION
RECOMMENDATIONS
Read the operation instructions carefully before using
the air purier, after reading keep them for future
reference.
• Use the unit for its intended purpose only, as it is
stated in this manual.
• Mishandling the unit can lead to its breakage and
cause harm to the user or damage to the user»s
property, which is not covered by warranty.
Attention! A lithium battery is used in the remote
control. To avoid danger, do not allow children to
play with the battery. If your child has swallowed a
battery, immediately see a doctor.
• Make sure that operating voltage of the unit indicated
on the label corresponds to your home mains
voltage.

7
EN
• Do not connect the unit to external timers or remote
control mains sockets.
• Place and use the air purier on a at dry and steady
surface. The distance between the unit body and
other furniture and interior objects should be at least
20 cm and 30-50 cm above the unit.
• Do not use the air purier outdoors.
• It is recommended not to use the unit during lightning
storms.
• Protect the unit from impacts, falling, vibrations and
other mechanical stress.
• Never leave the unit connected to the mains
unattended.
• Do not use the unit near heating appliances, heat
sources or open ame.
• Do not use the unit in places where aerosols are
used or sprayed, and in proximity to inammable
liquids.
• Do not immerse the air purier, the power cord or the
power plug into water or any other liquids.
• Do not use the unit in proximity to the kitchen sink, in
bathrooms, near swimming pools or other containers
lled with water.
• If the unit is dropped into water, unplug it
immediately, and only then you can take the unit out
of water.
• Do not let the power cord touch hot surfaces and
sharp edges of furniture.
• Unplug the unit after usage or before cleaning. When
unplugging the unit, hold the power plug and carefully
remove it from the mains socket, do not pull the
power cord, as this can lead to its damage and cause
a short circuit.
• Do not touch the unit body, the power cord and the
power plug with wet hands.
• Use only the removable parts supplied with the unit.
• Do not cover the air purier during the operation.
• Do not cover the air inlets on the unit body and avoid
getting of foreign objects inside them.
• Clean the unit regularly.
• For child safety reasons do not leave polyethylene
bags used as packaging unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging lm. Danger of
su󰀨ocation!
• The unit is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the operating surface,
the unit body, the power cord or the power plug
during operation of the unit.
• Be especially careful if children or disabled persons
are near the operating unit.
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.

8
EN
• The unit is not intended for usage by physically,
sensory, psychically or mentally disabled persons
(including children) or by persons lacking experience
or knowledge if they are not under supervision of a
person who is responsible for their safety or if they
are not instructed by this person on the usage of the
unit.
• From time to time check the power cord integrity.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualied personnel to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the service center.
• To avoid damages, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specied specications of power
supply voltage of the unit correspond to the
specications of your mains.
Remote control (25)
Attention! A lithium battery is used in the remote
control. To avoid danger, do not allow children to play
with the battery. If your child has swallowed a battery,
immediately see a doctor.
Battery installation/replacing (pic. 2)
• Press on the clamp and remove the battery holder
(26) from the remote control (25) body, insert a
CR2025 battery (supplied with the unit) into the
holder, strictly following the polarity.
• Install the battery holder (26) into the remote control
(25).
Notes:
- if there is an isolation insert, remove it.
- replace the battery in time;
- do not recharge the lithium battery;

9
EN
- remove the battery if you are not planning to use
the unit for a long time;
- remove the used battery from the remote control
(25) and dispose of it.
Preparing the lters before the using the air purier
• Remove the lid (1) (pic. 3).
• Remove the lters from the air purier»s body.
• Unpack the lters (pic. 4).
• Install the HEPA lter (10) into the air purier body
(pic. 5).
• Install the second two-piece (catalytic + coal lter),
make sure that the »puller» is pointing towards you
(pic. 5).
• Install the prelter (8) (g. 5).
• Install the front lid (1) back to its place (pic. 6).
• The air purier is ready for operation.
USING THE AIR PURIFIER
• Place and use the air purier on a at dry and steady
surface. The distance between the unit body and
other furniture and interior objects should be at least
20 cm and 30-50 cm above the unit.
Switching on
• Insert the power plug into the mains socket and a
beep will sound on the control / indication panel
(2) for the self-test, all symbols will be displayed
alternately, and then all symbols will ash and go out
- the air purier is in standby mode.
• Every pressing of the active button is accompanied
by a sound signal.
• To turn on the air purier, press the «On / O󰀨» button
(11) on the control / indication panel (2) or press the
«On / O󰀨» button (20) on the remote control (25) and
the air purier will start up.
• Numerical symbols (18) will show the air condition in
the room:
- less than 19 (polluted air);
- 20-29 (normal air composition);
- more than 30 (clean air).
• To turn o󰀨 the air purier, press and hold the «On /
O󰀨» button (11) on the control / indication panel (2)
for 3 seconds or press and hold the «On / O󰀨» button
(20) for 3 seconds on the remote control (25) and
disconnect the power plug from the mains socket.
Speed operation mode selection
• To select a high-speed operating mode, press the
«Speed» button (12) on the control / indication panel
(2) or press the «Speed» button (22) on the remote
control (25) and the operating mode indicators (15)
will light up:
- « » maximum speed
- « » medium speed;
- « » low speed (night mode)
- « » automatic operation mode, high-
speed operation mode of the air purier is set
automatically depending on the air purity in the
room.

10
EN
Night mode
• To turn the night mode on, press and hold the
«Speed» button (12) on the control / indication panel
(2) for 3 seconds or press and hold the «Speed»
button (22) on the remote control (25) for 3 seconds.
• In night mode, the air purier will turn on at low speed
«» and all symbols will go out.
• To turn the night mode o󰀨 - press any button on the
control / indication panel (2) or press any button on
the remote control (25).
Air purier switch o󰀨 timer
• By consequently pressing the button (13) «Timer»
on the control/indication panel (2) or the button (24)
«Timer» on the remote control (25), set the timer
operation time, the operation time is displayed by the
digits (16).
• Timer setting time is from 1 to 24 hours.
• To turn the timer o󰀨, press and hold the «Timer»
button (13) on the control / indication panel (2) for 3
seconds or press and hold the «Timer» button (24)
on the remote control (5) and the digital symbols of
timer operation time(16) will be reset.
Ionization mode
• To switch the ionization mode on, press the «
Ionization» button (19) on the control/indication
panel (2) or press the «Ionization» button (21) on the
remote control (25) and the symbol (14) « » will
light up.
• To switch the ionization mode o󰀨, press the
«Ionization» button (19) on the control/indication
panel (2) or press the «Ionization» button (21) on the
remote control (25) and the symbol (14) « » will
go out.
Resetting the lter operation time
• If the symbol (17) « » is displayed, you will
heat a long beep sound and the air purier will be
switched o󰀨, this means that the lters (8, 9, 10) need to
be cleaned or replaced.
ATTENTION! Before removing the lid (1), make sure
that the power plug is not inserted into the mains
socket.
• Remove the cover (1) (g. 3) and take out the prelter
(8).
• Using a household vacuum cleaner with an
appropriate attachment, carefully vacuum the outer
surface of the prelter (8), if there is dust on the
charcoal lter (9) and the HEPA lter (10), vacuum them
too.
• Insert lters (10, 9, 8) into the air purier body (g. 5).
• Install the lid (1) back to its place (g. 6).
• Turn on the air purier, press and hold the «Ionization»
button (19) on the control / indication panel (2) for 3
seconds or press and hold the «RESET» button (23) on
the remote control (25) for 3 seconds and the symbol
(18) « » will go out.