BRAYER BR1009 User manual

Instruction manual
Инструкция по эксплуатации
Electric kettle BR1009
Электрический чайник BR1009
brayer.pro

СОДЕРЖАНИЕ
EN......................................................................................................................................3
DE....................................................................................................................................10
RU ...................................................................................................................................18
KZ ....................................................................................................................................26

3
EN
ELECTRIC KETTLE BR1009
The electric kettle is intended only for boiling
drinking water.
DESCRIPTION
1. Kettle ask
2. Kettle spout
3. Lid
4. Lid opening button
5. Handle
6. ON/OFF button (0/I)
7. Base
8. Cord storage
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal operation
current not exceeding 30 mA into the mains. To install
RCD, contact a specialist.
EN
1
2
3
4
5
8
7
6

4
EN
SAFETY MEASURES AND OPERATION RECOMMENDATIONS
Read the operation instructions carefully before using the electric kettle and keep it for future reference.
• Use the electric kettle for its intended purpose only,
as it is stated in this manual.
• Mishandling the kettle can lead to its breakage and
cause harm to the user or damage to his/her property
and it is not covered by warranty.
• The kettle is intended for heating and boiling drinking
water only, do not heat or boil any other liquids.
• Make sure that operating voltage of the electric kettle
indicated on the label corresponds to your home
mains voltage.
• The power plug is equipped with a grounding contact,
plug it into the socket with
• reliable grounding contact. In case of short circuit the
grounding reduces the risk of electric shock.
• Contact an electrical technician, if you are not
sure that your sockets are installed properly and
grounded.
• To prevent re do not use adapters designed for
connecting the plug to the mains socket without
grounding contact.
• In case of sparking in the mains socket and
occurrence of smell of burning, unplug the unit and
apply to the organization maintaining your home
mains.
• If smoke appears from the body of the kettle, unplug
the unit and take measures to prevent re spreading.
• Do not use the electric kettle outdoors.
• It is not recommended to use the unit during lightning
storms.
• Do not place any foreign objects on the kettle ask.
• Protect the unit from impacts, falling, vibrations and
other mechanical stress.
• Never leave the plugged-in electric kettle unattended.
• Do not use the electric kettle in proximity to kitchen
sink, in bathrooms, near swimming pools or other
containers lled with water.
• Do not use the electric kettle near heating
appliances, heat sources or open ame.
• Do not use the electric kettle in places where
aerosols are used or sprayed, and in proximity to
inammable liquids.
• Place the electric kettle on a at stable surface; do
not place it on the edge of a table. Do not let the
power cord hang from the edge of the table and
make sure it does not touch hot surfaces or sharp
edges of furniture.
• Do not direct the kettle spout at wooden furniture,
books and objects which can be damaged by
moisture or hot steam.
• Do not touch the power cord and the power plug with
wet hands.

5
EN
• Do not switch the kettle on without water, after the
kettle is lled, close the lid tightly.
• Ensure that the water level is not above the maximal
mark «MAX». If the water level exceeds the maximal
mark, boiling water can splash out of the kettle during
boiling.
• To avoid burns by hot steam, do not bend over the
kettle spout.
• Do not open the kettle lid while water boiling.
• The surface of the kettle ask and the heating
element may have rather high temperature.Be
cautious and careful when in contact with heated
surfaces of the kettle. Take the kettle by the handle.
• Be careful while carrying the kettle lled with boiling
water. Be careful when you pour water out of the
kettle, do not tilt the kettle sharply, in case of careless
use of the kettle, you can get burns by hot water.
• Unplug the kettle before cleaning or when you are
not using it. When unplugging the kettle hold only
the power cord plug and carefully remove it from the
mains socket, do not pull the power cord — this can
lead to damage of the power cord or the socket or
cause short circuit.
• To avoid electric shock do not immerse the electric
kettle into water or any other liquids.
• Do not wash the electric kettle in a dishwashing
machine.
• For children safety reasons do not leave polyethylene
bags, used as a packaging, unattended.
ATTENTION!
Do not allow children to play with polyethylene bags
or packaging lm. Danger of su󰀨ocation!
• The electric kettle is not intended for usage by
children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the unit and the power
cord during the electric kettle operation.
• Place the unit out of reach of children during the
operation and cooling down.
• This unit is not intended for usage by physically or
mentally disabled persons (including children) or
• by persons lacking experience or knowledge if
they are not under supervision of a person who
is responsible for their safety or if they are not
instructed by this person on the usage of the unit.
• Check the integrity of the power cord, the power plug
and the kettle body periodically.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualied personnel to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after it was dropped, unplug the unit
and apply to the service center.
• Transport the kettle in the original package.

6
EN
• Keep the unit out of reach of children and disabled
• persons.
ELECTRIC KETTLE IS INTENDED FOR HOUSEHOLD
USE ONLY, DO NOT USE THE KETTLE FOR
INDUSTRIAL OR LABORATORY PURPOSES.
BEFORE USING THE KETTLE
After unit transportation or storage at low
temperature, it is necessary to keep it for at least
three hours at room temperature.
• Unpack the kettle and remove all the packaging
materials.
• Keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• Examine the kettle for damages, in case of damage
do not plug it into the mains.
• Make sure that the specications of power supply
voltage specied on the lower panel of the unit or
the base correspond to the specications of your
mains. When using the kettle in the mains with 60
Hz frequency, the unit does not need any additional
measures.
• Wipe the outer surface of the ask (1) with a clean,
slightly damp cloth to remove dust.
• Place the base (7) of the kettle on a solid steady
at and non-slip non-metal surface away from heat
sources as far as possible from the edge of the
surface.
• Do not place and do not use the kettle in closed
space, for example, in the cupboard or in closed
structures – this can lead to its breakage, cause
harm to the user or damage to his/her property.
• Wash the kettle ask (1) with neutral detergents,
rinse and dry. Wipe the outer surface of the ask (1)
with a slightly damp cloth and then wipe it dry. Do not
use abrasives or coarse scourers for this.
• Before connecting the kettle, make sure that there
are no moisture drops on the ask (1), the power
cord and the power plug.
• Make sure that the kettle is switched o󰀨, the ON/OFF
button (6) is set to the position «0».
• To ll the kettle with water, take it o󰀨 the base (7),
press the lid (3) opening button (4).
• Fill the kettle with water up to the mark «MAX» inside
the ask (1).
• Close the lid (3), make sure that the lid (3) is closed
tightly.
• Set the kettle lled with water on the base (7).
• Insert the power plug into the mains socket.
• To switch the kettle on, set the ON/OFF button (6) to
the position «I», the ON/OFF button (6) indicator will
light up.

7
EN
ATTENTION!
To avoid burns by hot steam, do not bend over the
spout (2).
• Once water starts boiling, the kettle will be switched
o󰀨 automatically and the indicator in the ON/OFF
button (6) will go out. Pour out water and repeat the
water boiling procedure several times.
• Hot water resulting from the rst boilings is not
recommended to consume, you may use it for
domestic needs.
USING THE ELECTRIC KETTLE
• Place the base (7) of the kettle on a solid steady
at and non-slip non-metal surface away from heat
sources as far as possible from the edge of the
surface.
• Ensure that the ON/OFF button (6) is always
accessible and is not blocked by foreign objects.
• Make sure that the kettle is switched o󰀨, the ON/OFF
button (6) is set to the position «0».
• To ll the kettle with water, take it o󰀨 the base (7),
press the lid (3) opening button (4).
• Fill the kettle with water not exceeding the maximal
mark «MAX» inside the ask (1).
• Close the lid (3) and put the full kettle on the base
(7).
• Insert the power plug into the mains socket.
• To switch the kettle on, set the ON/OFF button (6) to
the position «I», the ON/OFF button (6) indicator will
light up.
• Once water starts boiling, the kettle will be switched
o󰀨 automatically and the indicator in the ON/OFF
button (6) will go out.
• Before removing the kettle from the base (7), make
sure that the kettle is switched o󰀨, the ON/OFF
button (6) is in the position «0».
• After switching the kettle o󰀨, wait for 15-20 seconds,
then you can switch it on again for re-boiling.
• If you need to switch the kettle o󰀨, set the power
switch (6) to the position «0».
• If you accidentally switched the kettle on, but the
water level appeared to be below the minimal mark,
the automatic thermal switch will be on and the kettle
will switch o󰀨.
• Unplug the kettle and let it cool down for 10-15
minutes, then ll the kettle with water and switch it
on, the kettle will operate in normal mode.
CLEANING AND MAINTENANCE
• Before cleaning unplug the kettle, pour out water and
let the kettle cool down.

8
EN
• Wipe the outer surface of the ask (1) with a slightly
damp cloth and then wipe the ask (1) dry. Use soft
detergents to remove dirt; do not use metal sponges,
abrasive detergents and solvents.
• Do not immerse the electric kettle, the base (7) and
the power cord into water or any other liquids, do not
wash the kettle in the dishwasher.
DESCALING
• Scale, appearing inside the ask (1), inuences the
water taste and disturbs the heat exchange between
water and the heating element. It also risks damaging
the heating element. Burning of the heating element
caused by the large amount of scale in the kettle is
not covered by warranty.
• To remove scale, you can use special scale-removing
agents, as well as household ones, for example,
vinegar or citric acid.
• To remove scale, ll the ask (1) with water one-third
full and boil it. Open the lid (3) and add table vinegar
(6-9%) to the «MAX» mark, leave the liquid in the
kettle for several hours. After the scale dissolves,
pour out the liquid and rinse the ask (1) several
times. To oust the smell of vinegar, boil water several
times.
• Dissolve 25 g of citric acid in 500 ml of hot water.
• Fill the kettle with the prepared solution and leave for
15-20 minutes.
• After scale dissolves pour out the liquid and rinse the
ask (1) several times, after that boil water several
times.
• You can use special detergents for electric kettles or
co󰀨ee machines to remove scale, strictly following
the instructions on their usage.
• Clean the kettle from scale regularly.
STORAGE
• Before taking the kettle away for long storage, unplug
it, pour out water and let the unit cool down.
• Clean the kettle ask (1).
• Fix the power cord in the cord storage (8) on the
base (7).
• Pack the kettle in the original package.
• Keep the kettle in a dry cool place out of reach of
children and disabled persons.
DELIVERY SET
1. Electric kettle — 1 pc.
2. Base — 1 pc.
3. Instruction manual — 1 pc.
TECHNICAL SPECIFICATIONS
• Supply voltage: 220-240 V, ~50-60 Hz
• Rated input power: 2200 W
• Maximum water capacity: 1,7 l

9
EN
RECYCLING
For environment protection apply to the
specialized centers for further recycling after
the service life expiration of the unit.
The waste generated during the disposal of
the unit is subject to mandatory collection
and consequent disposal in the prescribed manner.
For further information about recycling of this product
apply to a local municipal administration, a disposal
service or to the shop where you purchased this
product.
The manufacturer reserves the right to change the
appearance, design and specications not a󰀨ecting
general operation principles of the unit, without prior
notice.
The unit operating life is 3 years
The manufacturing date is specied in the serial
number.
In case of any malfunctions promptly apply to the
authorized service center.

10
DE
WASSERKOCHER BR1009
Der Wasserkocher ist nur zum Kochen von
Trinkwasser bestimmt.
BESCHREIBUNG
1. Kolben des Wasserkochers
2. Tülle des Wasserkochers
3. Deckel
4. Taste der Deckelö󰀨nung
5. Gri󰀨
6. Ein-/Ausschalttaste (0/I)
7. Untersatz
8. Kabelaufbewahrung
ACHTUNG!
Als zusätzlicher Schutz ist es zweckmäßig, den
FI-Schalter mit Nennstrom maximal bis 30 mA im
Stromversorgungskreis aufzustellen; wenden Sie sich
dafür an einen Spezialisten.
DE
1
2
3
4
5
8
7
6