Breas HA 20 User manual

HA 20 – Heated Humidier
• Heated humidication
• Accessory to iSleep and Vivo 30/40
• Activated and controlled through the iSleep and Vivo
30/40 device
• No separate power cable required
• Smart water trap
• Convenient lling hole and clear water indication
• Easy to connect and to remove
• Easy to clean
The HA 20* is an integrated heated humidier,
especially designed for use with the iSleep* and
Vivo* 30/40 devices. To meet increasing demands of
customers regarding comfort and security, the HA 20
has now been further enhanced.
The HA 20 is truly integrated with the iSleep and Vivo 30/40 devices,
both in design and function. When connected to an iSleep or Vivo
30/40 device, all HA 20 operations are set and monitored through
the menu of the device. The HA 20 consists of a heating unit and a
separate water chamber. The water chamber is easy to connect and
to remove through the quick-release handle. No separate power cords
are required because power is provided through the iSleep or Vivo
30/40 device.
What’s new?
The current enhancements help further increase handling comfort and
reducing the risk of water entering the device.
1. A smart water trap has been inserted into the lid to reduce the risk
of water entering the device
2. A clear indication of the maximum water level has been added to
the container
3. A new lling hole is added to facilitate lling the HA 20.
4. A simple leaet with instructions for use is provided in the HA 20
(remove before use).
Please remember to always remove the HA 20 from the device and use
the lling hole to ll it. Do not surpass the maximum indicated water
level and remove / empty the HA 20 before transporting the device.
Part numbers
The part numbers for the HA 20 have remained unchanged:
• 2220XX Complete HA 20 White (where XX is the country code)
• 2230XX Complete HA 20 Silver (where XX is the country code)
• 004861 Water chamber
The HA 20 is operated through
the iSleep/Vivo 30/40 device

Technical Specications
Power Supplies
Power supply 10-30 VDC, max 40 W.
Environmental Conditions
Operating temperature 5 to 40ºC (41 to 104ºF)
Storage and transport temperature -20 to +60ºC (-4 to 140ºF)
Ambient pressure range 700 to 1060 mbar
Humidity 10% to 95%, non-condensing
Breas Medical AB reserves the right to make changes to the contents of this Product Specication without any prior notication.
Dimensions
W x H x D 150 x 140 x 100 mm
Weight 425 g
Air outlet 22 mm conical standard connector
Water chamber volume 300 ml
Performance
Gas leakage at max. operating pressure < 5 ml/min
Warm up time for delivered gas temperature Less than 60 minutes to reach the set temperature from starting temperature of 23+/-2ºC
Breas Medical AB/2015/DOC1280974
*HA 20, iSleep by Breas and Vivo by Breas are trademarks of Breas Medical AB
© 2015 Breas Medical – All rights reserved.
Breas Medical reserves the right to make changes in specifications and features shown
herein, or discontinue the product described at any time without notice or obligation.
Contact your Breas representative for the most current information.
Breas and the Breas logo are trademarks of Breas Medical AB.
Breas Medical AB · Företagsvägen 1 · SE-435 33 Mölnlycke · Sweden
Phone [phone] · Fax [phone] · www.breas.com