Breville Smart Grill BGR820XL/A User manual

Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Copyright Breville Pty. Ltd. 2013.
Due to continued product improvement, the products illustrated/photographed
in this booklet may vary slightly from the actual product.
BGR820XL/A Issue - A13
www.breville.com
Canada
Mail: Breville Canada
2555, Avenue de l’Aviation
Pointe-Claire (Montreal)
Quebec H9P 2Z2
Phone: [phone]
Email: [e-mail]
USA
Mail: Breville USA
19400 S. Western Ave
Torrance CA
90501-1119
Phone: [phone]
1-866-BREVILLE
Email: [e-mail]
Breville Consumer Service Center

BGR820XL/A
the Smart Grill™
Instruction Booklet - Livret d’instructions

CONGRATULATIONS
on the purchase of your Breville product
*Registering is not a substitute for proof of purchase when submitting a Warranty Claim.
USA Consumers: www.brevilleusa.com
Canadian Consumers: www.breville.ca
Register online for product support
and exclusive offers.*

3
CONTENTS
4Breville recommends safety first
6Know your Breville product
9Assembling your Breville product
11 Operating your Breville product
20 Grilling tips
24 Care & cleaning
28 Recipes
38 French

4
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE FOR
FUTURE REFERENCE
• Carefully read all instructions before
operating the grill for the first time and
save for future reference.
• Remove and safely discard any
packaging material and promotional
labels before using the grill for the first
time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug
of this appliance.
• Do not place the grill near the edge of a
bench or table during operation. Ensure
the surface is level, clean and free of
water and other substances.
• Do not use the grill on a sink drain
board.
• Do not place the grill on or near a hot
gas or electric burner, or where it could
touch a heated oven.
• Position the grill at a minimum distance
of 8 inches (20cm) away from walls,
curtains, cloths and other heat sensitive
materials.
• Always operate the grill on a stable and
heat resistant surface. Do not use on a
cloth-covered surface, near curtains or
other flammable materials.
• Always ensure the grill is properly
assembled before use. Follow the
instructions provided in this book.
• The appliance is not intended to be
operated by means of an external timer
or separate remote control system.
• The lid and the outer surface will be hot
when the appliance is operating.
• The temperature of accessible surfaces
will be high when the appliance is
operating and for some time after use.
• Do not place anything on top of the grill
when the lid is closed, when in use and
when stored.
• Always switch the appliance to the
off position, then unplug the power
cord and cool completely, if appliance
is not in use, before cleaning, before
attempting to move the appliance,
disassembling, assembling and when
storing the appliance.
• Keep the grill clean. Follow the cleaning
instructions provided in this book.
• On surfaces where heat may cause
a problem, an insulating mat is
recommended.
• Do not operate without the drip tray
in place.
• The use of any accessory attachments
not recommended by Breville may
cause injuries.
• Do not leave the appliance unattended
when in use.
• Close supervision is necessary when the
appliance is used by or near children.
IMPORTANT SAFEGUARDS

5
BREVILLE RECOMMENDS SAFETY FIRST
5
IMPORTANT SAFEGUARDS
FOR ALL ELECTRICAL
APPLIANCES
• Fully unwind the power cord before use.
• Do not let the power cord hang over
the edge of a bench or table, touch hot
surfaces or become knotted.
• To protect against electric shock do not
immerse the power cord, power plug or
appliance in water or any other liquid.
• The appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
• It is recommended to regularly inspect
the appliance. Do not use the appliance
if the power cord, power plug, or
appliance becomes damaged in anyway
Immediately cease use and call Breville
Consumer Service for examination,
repair or adjustment.
• For any maintenance other than
cleaning, visit www.Breville.com or call
Breville Consumer Service.
• This appliance is for household use only.
Do not use this appliance for anything
other than its intended use. Do not use
in moving vehicles or boats. Do not use
outdoors. Misuse may cause injury.
• The installation of a residual current
device (safety switch) is recommended
to provide additional safety protection
when using electrical appliances. It
is advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice.
SHORT CORD INSTRUCTIONS
• Your Breville appliance is fitted with
a short power supply cord to reduce
personal injury or property damage
resulting from pulling, tripping or
becoming entangled with a longer
cord. If an extension cord is used, (1)
the marked electrical rating of the
cord set or extension cord should be at
least as great as the electrical rating of
the appliance, (2) the cord should be
arranged so that it will not drape over
the countertop or table-top where it
can be pulled on by children or tripped
over unintentionally and (3) the
extension cord must include a 3-prong
grounding plug.
BREVILLE ASSIST™ PLUG
• Your Breville appliance comes with
a unique Assist™ Plug, conveniently
designed with a finger hole to ease
removal from the wall outlet. For safety
reasons it is recommended you plug
your Breville appliance directly into
its own electrical outlet on a dedicated
circuit separate from other appliances.
If the electric circuit is overloaded
with other appliances, your appliance
may not function properly. It is not
recommended to use with a power strip.

KNOW
your Breville product

7
KNOW YOUR BREVILLE PRODUCT
A. Stainless Steel Housing
With Die-Cast Arms
B. Cast Aluminium, Non-Stick Plates
Coated with titanium infused
Quantanium™ for oil-free cooking and
easy cooking.
C. Removable, Dishwasher Safe Plates
Flat plate for eggs and pancakes, ribbed
plate to sear meats.
D. Bottom Plate Release
Removes the bottom cooking plate.
Independently remove the top and
bottom cooking plates for easy cleaning
or to interchange plate positions.
A
B
C
E
D
F G H I
J
K
L
M
N
P O
E. Integrated, Removable Drip Tray
Catches excess fat for healthier cooking.
In BBQ mode, the unique design drains
fat from both plates into the same
drip tray.
F. 30 Minute Timer Dial with Sound Alert
Pressing the center button of the dial
activates the count-down timer.
G. Temperature Conversion Button
Converts the default Fahrenheit reading
to Celcius.
H. Temperature Responsive LCD
Backlight illuminates blue (stand by)
and orange (heating/ready).
Open Flat BBQ Mode
Opens flat into a 260 sq.
inch grilling surface.

8
KNOW YOUR BREVILLE PRODUCT
I. Temperature Dial (320°F–450°F)
With LOW, PANINI (sandwich) and
SEAR modes.
J. Cord Storage
Located on the underside of the grill.
K. Adjustable Plate Tilt
Adjusts the angle of the bottom cooking
plate to drain fats, or can be made flat
for eggs and pancakes.
L. Locking Storage Clip
Locks the plates closed for upright
storage.
M. BBQ Lock Release
N. 6 Adjustable Height Settings
Reduces the weight of the top plate on
delicate foods or can be set high enough
for open melts.
O. Levelling Support
Integrated into the top plate release,
use to adjust the position of the floating
top plate.
P. Top Plate Release
Removes the top cooking plate.
1-Hour auto shut-off automatically stops
heating the cooking plates after 1 hour of no
activity.
ELEMENT IQ™
Sensors detect when the cooking plates drop
in temperature and compensate by injecting
heat for rapid recovery back to the selected
cooking temperature. 1800 watt embedded
heating elements ensure consistently
high heat for faster cooking and reduced
preheating time.

ASSEMBLING
your Breville product

10
PAGE HEADER.....ASSEMBLING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
1. Remove and safely discard any packing
material and promotional labels from
the grill
2. Wipe the cooking plates and drip
tray with a soft damp sponge. Dry
thoroughly.
3. Ensure the drip tray is correctly inserted
into the grill.
4. Ensure the cooking plates are correctly
inserted and securely locked into
position.
NOTE
The grill features 2 x PLATE
RELEASE. These allow you to
independently remove the top and
bottom cooking plates for easy
cleaning, or to interchange plate
positions.
To use the PLATE RELEASE:
- Always ensure the grill is
completely cool.
- Use the handle to open the top plate
to a 90 degree position.
- Use the ‘Plate Release’ on the front,
right side of the top plate to remove
the top cooking plate, and the ‘Plate
Release’ on the left side of the
control panel to remove the bottom
cooking plate.
- Once released, gently slide the plates
off the grill.
NOTE
If the cooking plates are incorrectly
inserted, the LCD screen will display
INSERT PLATE. Use the 2 x PLATE
RELEASE to remove the plates then
re-insert so they securely lock into
position. Always ensure the grill is
completely cool before releasing and
removing the cooking plates.
5. Place the grill on a flat, dry surface.
Ensure there is a minimum distance of 8
inches (20cm) of space on both sides of
the appliance.
6. Unwind the power cord completely and
insert the power plug into a grounded
wall outlet.
7. The grill alert will sound and the LCD
screen will display OFF and the default
‘0’ zero time.
8. The grill is now ready for the preheating
cycle.
NOTE
When the grill is turned on and
heating for the first time, it may
emit a fine smoke haze. This is due
to the protective substances on the
heating elements. It is safe and not
detrimental to the performance of
the grill.

OPERATING
your Breville product

12
PAge heAder.....
OPERATING YOUR BREVILLE PRODUCT
USE IN OPEN FLAT BBQ MODE
The grill opens flat into a 260 sq. inch
grilling surface. The ribbed cooking plate
is perfect for searing meats while the flat
cooking plate is ideal for eggs, pancakes and
vegetables.
1. Ensure the drip tray is correctly inserted
into the grill.
2. Ensure the cooking plates are
correctly inserted and securely locked
into position.
NOTE
If the cooking plates are incorrectly
inserted, the LCD screen will display
INSERT PLATE. Use the 2 x PLATE
RELEASE to remove the plates then
re-insert so they securely lock into
position. Always ensure the grill is
completely cool before releasing and
removing the cooking plates. Refer to
page 10 for more information on using
the PLATE RELEASE.
3. Place the grill on a flat, dry surface.
Ensure there is a minimum distance of
8 inches (20cm) of space both sides
of the appliance.
4. Unwind the power cord completely and
insert the power plug into a grounded
wall outlet.
5. The grill alert will sound and the LCD
screen will display OFF and the default
‘0’ zero time.
6. To preheat the grill:
a) Ensure the top plate of the grill is
closed. This will ensure faster, more
efficient preheating.
b) Turn the Temperature Dial to adjust
the temperature. Rotate the dial
to SEAR (450°F–410°F) for fast
preheating, PANINI (400°F–360°F),
LOW (350°F–320°F) or select an
alternative temperature. The grill
will start to heat and the LCD screen
will illuminate orange and display
the selected temperature, HEATING
and the default ‘0’ zero time.
c) Allow the grill to preheat.

13
PAge heAder.....
OPERATING YOUR BREVILLE PRODUCT
NOTE
The grill features a temperature
conversion button on the left side
of the LCD screen. The temperature
reading on the grill is preset to
Fahrenheit. Pressing the temperature
conversion button converts the
Fahrenheit temperature reading into
Celsius. The corresponding °F or °C
symbol will be displayed on the
LCD screen.
NOTE
If you have changed the default
Fahrenheit temperature reading to
Celsius, the setting will remain in
the memory of the grill until the
Temperature Conversion Button is
pressed a second time or the grill is
unplugged from the wall outlet. When
the grill is plugged back into the wall
outlet, the temperature reading will
automatically return to the preset
Fahrenheit setting.
7. While the grill is preheating, adjust
the angle of the cooking plates to the
desired position by turning the PLATE
TILT dial. The PLATE TILT dial is
located on the lower back, right side of
the grill.
NOTE
We recommend using:
- The angle position to drain fats for
healthier cooking.
- The flat position for cooking eggs,
pancakes, paninis and leaner meats.
The unique indent between the two
cooking plates channels juices from
both plates into the same drip tray
while cooking.
8. Once the grill has preheated to the
selected temperature, the grill alert will
sound and HEATING will no longer
illuminate. The LCD screen will display
the selected temperature and the default
‘0’ zero time.
NOTE
Always allow the grill to completely
preheat to the selected temperature
before cooking.
NOTE
The LCD screen may display
HEATING during the cooking process.
This is normal, indicating that the
correct temperature is
being maintained.
9. To open the grill into BBQ mode:
a) Ensure the grill has completely
preheated and the LCD screen no
longer displays HEATING.
b) Ensure the top cooking plate is
closed. The adjustable height
control clip, located on the right
side of the top plate, should be in
the OPEN position.

14
c) With your left hand, grip the
handle. With your right hand, pull
the adjustable height control clip
towards you, into the BBQ mode
position. Continue to pull the clip
forward and simultaneously lift the
handle to open, then gently lower
the top plate into the horizontal BBQ
mode position.
NOTE
When the top plate is closed, it will
automatically return the top plate
to the OPEN position. To unlock the
top plate, pull the Adjustable Height
Control clip on the right side of the
grill towards you and into the OPEN
position.
- When using the grill in BBQ mode,
continue to pull the clip forward and
simultaneously lift and lower
the handle.
- When using the grill as a contact
grill or sandwich press, release
the clip and simultaneously lift
the handle.
10. Place food on either or both of the
cooking plates. Refer to grilling tips
(page 20) and recipes (page 28).
NOTE
Do not use spray-on, non-stick
coatings as these will affect the
performance of the non-stick
cooking plates.
NOTE
The LCD screen may display
HEATING during the cooking process.
This is normal, indicating that
the correct temperature is being
maintained.
11. The grill features an optional count-
down timer which monitors the time
elapsed during cooking. To activate the
count-down timer:
a) Ensure the grill has completely
preheated, the LCD screen no longer
displays HEATING and food has
been placed on the cooking plates.
b) Turn the timer dial to adjust the
time in one minute increments up
to 30 minutes. Rotate the dial
clockwise to increase the time, or
counter-clockwise to reduce the
time. The LCD screen will display
the selected time.
c) Press the button within the timer
dial once, to activate the setting. The
LCD screen will display a count-
down indicator and the time will
begin to count down.
OPERATING YOUR BREVILLE PRODUCT

15
NOTE
The count-down timer can be stopped
or paused at any time by pressing the
button within the Timer Dial a second
time. The LCD screen will no longer
display the count-down indicator.
However, the grill will not turn off, it
will remain heating.
To reset or clear the timer either:
- Rotate the timer dial clockwise
to increase the time, or counter-
clockwise to reduce the time. Or,
- Press the button within the timer
dial and hold for 3 seconds until the
time on the LCD screen displays ‘0’
zero. Rotate the timer dial clockwise
to increase the time, or counter-
clockwise to reduce the time.
12. Once the selected time has elapsed, the
grill alert will sound. The LCD screen
will display a blinking ‘00’ then the
default ‘0’ zero time. However, the grill
will not turn off. It will remain heating,
maintaining the selected temperature,
ready for the next cooking cycle.
NOTE
The cooking and heating cycle can
be stopped at any time by turning
the Temperature Dial to the OFF
position. The LCD screen will display
OFF, the default ‘0’ zero time and
cease to illuminate after 3 minutes.
Allow the grill to cool completely and
disconnect from the wall outlet.
NOTE
The grill features a 1-Hour Auto
Shut-Off feature. This ensures the
grill is not accidentally left on for
an extended period of time. If the
temperature or timer dials are not
adjusted within 1 hour, the Auto Shut-
Off feature will automatically stop
heating the cooking plates. The LCD
screen will display ‘OFF’, the default
'0' zero time and cease to illuminate
after 3 minutes. To re-activate the
grill, adjust the temperature or
timer dials.
13. When the food is cooked, remove from
the cooking plates using heat proof
plastic or wooden utensils.
NOTE
Never use metal or sharp utensils
as these can cause damage to
the non-stick coating of the
cooking plates.
WARNING
Fully unwind the power cord from the
cord storage before use.
OPERATING YOUR BREVILLE PRODUCT

16
USE AS A CONTACT GRILL OR
PANINI PRESS
1. Ensure the drip tray is correctly inserted
into the grill.
2. Ensure the cooking plates are correctly
inserted and securely locked into
position.
NOTE
If the cooking plates are incorrectly
inserted, the LCD screen will display
INSERT PLATE. Use the 2 x PLATE
RELEASE to remove the plates then
re-insert so they securely lock into
position. Always ensure the grill is
completely cool before releasing and
removing the cooking plates. Refer to
page 11 for more information on using
the PLATE RELEASE.
3. Place the grill on a flat, dry surface.
Ensure there is a minimum distance of
8"(20cm) of space on both sides of the
appliance.
4. Unwind the power cord completely and
insert the power plug into a grounded
wall outlet.
5. The grill alert will sound and the LCD
screen will display OFF and the default
‘0’ zero time.
6. To preheat the grill:
a) Ensure the top plate of the grill is
closed. This will ensure faster, more
efficient preheating.
b) Turn the Temperature Dial to adjust
the temperature. Rotate the dial
to SEAR (450°F–410°F) for fast
preheating, PANINI (400°F–360°F),
LOW (350°F–320°F) or select an
alternative temperature. The grill
will start to heat and the LCD screen
will illuminate orange and display
the selected temperature, HEATING
and the default ‘0’ zero time.
c) Allow the grill to preheat.
OPERATING YOUR BREVILLE PRODUCT

17
NOTE
The grill features a temperature
conversion button on the left side
of the LCD screen. The temperature
reading on the grill is preset to
Fahrenheit. Pressing the Temperature
Conversion Button converts the
Fahrenheit temperature reading into
Celsius. The corresponding °F or °C
symbol will be displayed on the
LCD screen.
If you have changed the default
Fahrenheit temperature reading to
Celsius, the setting will remain in
the memory of the grill until the
temperature conversion button is
pressed a second time or the grill is
unplugged from the wall outlet. When
the grill is plugged back into the wall
outlet, the temperature reading will
automatically return to the preset
Fahrenheit setting.
7. While the grill is preheating, adjust
the angle of the bottom cooking plate
to the desired position by turning the
PLATE TILT dial. The PLATE TILT dial
is located on the lower back, right side
of the grill.
NOTE
We recommend using:
- The angle position to drain fats for
healthier cooking.
- The flat position for cooking eggs,
pancakes, paninis and leaner meats.
8. Once the grill has preheated to the
selected temperature, the grill alert will
sound and HEATING will no longer
illuminate. The LCD screen will display
the selected temperature and the default
‘0’ zero time.
NOTE
Always allow the grill to completely
preheat to the selected temperature
before cooking.
NOTE
The LCD screen may display
HEATING during the cooking
process. This is normal, indicating
that the correct temperature is
being maintained.
9. To open the grill:
a) Ensure the grill has completely
preheated and the LCD screen no
longer displays HEATING.
b) Ensure the top cooking plate is
closed. The Adjustable Height
Control clip, located on the right
side of the top plate, should be in the
OPEN position.
c) Use the handle to open the top plate
to a 90 degree position.
10. Place food on the bottom cooking plate.
NOTE
Do not use spray-on, non-stick
coatings as these will affect the
performance of the non-stick
cooking plates.
OPERATING YOUR BREVILLE PRODUCT

18
NOTE
For best cooking results when toasting
paninis:
- Always place paninis on the center of
the bottom plate.
- Toasting should take approximately
5–8 minutes. Exact toasting time will
be a matter of preference and the
type of bread and fillings used. For
more tips and tricks, refer to Grilling
Tips (page 20), Grilling Guide (page
23) and Recipes (page 28).
NOTE
The LCD screen may display
HEATING during the cooking
process. This is normal, indicating
that the correct temperature is being
maintained.
11. Use the handle to close the top cooking
plate. The top cooking plate has two
features designed to produce optimum
cooking results:
a) Floating top plate. The top cooking
plate is hinged, allowing the top
plate to be positioned horizontally
on the food surface. This ensures
the front of the food is as evenly
cooked as the back. It also allows
the top plate to float above the food
surface, radiating heat to create open
sandwich style ‘melts’.
NOTE
The surfaces of the grill are hot during
and after operation. Always use the
integrated leveling support/
PLATE RELEASE on the front, right
side of the top cooking plate when
adjusting the position of the top plate.
Alternatively, use protective hot pads
or insulated oven mitts.
NOTE
Never use the leveling support to
open the top cooking plate. Always
use the handle to open and close the
top cooking plate.
WARNING
The levelling support may get hot
during and after operation. Always use
the levelling support as pictured.
WARNING
Never grip the levelling support or use
it to open the top cooking plate.
Always use the grill handle to open
and close the top cooking plate.
b) Adjustable height control. This
feature reduces the weight of the top
plate on delicate foods like fish and
accommodates varying thicknesses
of food like artisan breads. Located
on the right side of the top plate, the
clip fixes the top plate to a range of
positions above the bottom plate. To
set the adjustable height control, use
the handle to lift the top plate and
simultaneously move the adjustable
height control clip to the desired
height. Then slowly lower the top
plate until it rests on the adjustable
height control clip.
OPERATING YOUR BREVILLE PRODUCT

19
12. The grill features an optional count-
down timer which monitors the time
elapsed during cooking. To activate the
count-down timer:
a) Ensure the grill has completely
preheated, the LCD screen no
longer displays HEATING and
food has been placed on the bottom
cooking plate.
b) Turn the timer dial to adjust the time
in one minute increments up to
30 minutes. Rotate the dial clockwise
to increase the time, or counter-
clockwise to reduce the time. The
LCD screen will display the
selected time.
c) Press the button within the timer
dial once, to activate the setting. The
LCD screen will display a count-
down indicator and the time will
begin to count down.
NOTE
The count-down timer can be stopped
or paused at any time by pressing the
button within the Timer Dial a second
time. The LCD screen will no longer
display the count-down indicator.
However, the grill will not turn off, it
will remain heating.
To reset or clear the timer either:
- Rotate the Timer Dial clockwise
to increase the time, or counter-
clockwise to reduce the time. Or,
- Press the button within the Timer
Dial and hold for 3 seconds until the
time on the LCD screen displays ‘0’
zero. Rotate the Timer Dial clockwise
to increase the time, or counter-
clockwise to reduce the time.
13. Once the selected time has elapsed, the
grill alert will sound. The LCD screen
will display a blinking ‘00’ then the
default ‘0’ zero time. However, the grill
will not turn off. It will remain heating,
maintaining the selected temperature,
ready for the next cooking cycle.
NOTE
The cooking and heating cycle can
be stopped at any time by turning
the Temperature Dial to the OFF
position. The LCD screen will display
OFF, the default ‘0’ zero time and
cease to illuminate after 3 minutes.
Allow the grill to cool completely and
disconnect from the wall outlet.
NOTE
The grill features a 1-Hour Auto
Shut-Off feature. This ensures the
grill is not accidentally left on for
an extended period of time. If the
temperature or timer dials are not
adjusted within 1 hour, the Auto Shut-
Off feature will automatically stop
heating the cooking plates. The LCD
screen will display OFF, the default ‘0’
zero time and cease to illuminate after
3 minutes. To re-activate the grill,
adjust the temperature or timer dials.
14. When the food is cooked, remove from
the cooking plates using heat proof
plastic or wooden utensils.
NOTE
When the food is cooked, remove from
the cooking plates using heat proof
plastic or wooden utensils.
WARNING
Fully unwind the power cord from the
cord storage before use.
OPERATING YOUR BREVILLE PRODUCT