Breville BGR820 User manual

Getting to Know your Smart Grill™
Instruction Booklet
BGR820
BGR820_IB_FA.indd 1 20/7/09 12:24:24 PM

2
CONGRATULATIONS
On the purchase of your new
Breville Professional 800 Collection™ Smart Grill™
BGR820_IB_FA.indd 2 20/7/09 12:24:27 PM

3
INTRODUCING THE BREVILLE PROFESSIONAL 800 COLLECTION™
SMART GRILL™
The smarter, more powerful removable plate grill.
Introducing a grill with Element IQ™, which ensures rapid recovery back to
optimum cooking temperature.
With an unprecedented 2400 watts, the embedded heating elements provide
consistent high heat for faster cooking and reduced pre-heating time.
This creates a BBQ quality sear that browns and caramelizes foods for succulent,
flavourful results.
BGR820_IB_FA.indd 3 20/7/09 12:24:28 PM

CONTENTS
4 Breville recommends safety first
8 Know your Breville Smart Grill
10 Before First use
11 - Preparing the Grill for use
12 Operating your Breville Smart Grill
12 - Use in open flat 'BBQ Mode'
16 - Use as a contact grill or sandwich press
20 - Grilling tips
22 Care, cleaning and storage
25 Troubleshooting
26 Recipes
27 - Grill recipes
34 - Sandwich recipes
BGR820_IB_FA.indd 4 20/7/09 12:24:28 PM

BREVILLE RECOMMENDS
SAFETY FIRST
BGR820_IB_FA.indd 5 20/7/09 12:24:31 PM

6
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with the safety
of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care
when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARDS FOR YOUR BREVILLE
PROFESSIONAL 800 COLLECTION™ SMART GRILL™
Carefully read all instructions before
operating the Smart Grill™ for the first
time and save for future reference.
Remove and safely discard any
packaging material and promotional
labels before using the Smart Grill™ for
the first time.
To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug
of this appliance.
Do not place the Smart Grill™ near
the edge of a bench or table during
operation. Ensure the surface is level,
clean and free of water and other
substances.
Do not use the Smart Grill™ on a sink
drain board.
Do not place the Smart Grill™ on or near
a hot gas or electric burner, or where it
could touch a heated oven.
Position the Smart Grill™ at a minimum
distance of 20cm away from walls,
curtains, cloths and other heat sensitive
materials.
Always operate the Smart Grill™ on a
stable and heat resistant surface. Do
not use on a cloth-covered surface, near
curtains or other flammable materials.
•
•
•
•
•
•
•
•
Always ensure the Smart Grill™ is
properly assembled before use. Follow
the instructions provided in this book.
The appliance is not intended to be
operated by means of an external timer
or separate remote control system.
The lid and the outer surface will be hot
when the appliance is operating.
The temperature of accessible surfaces
will be high when the appliance is
operating and for some time after use.
Do not place anything on top of the
Smart Grill™ when the lid is closed,
when in use and when stored.
Always switch the to the off position,
switch the Smart Grill™ off at the power
outlet, then unplug the power cord and
cool completely, if appliance is not in
use, before cleaning, before attempting
to move the appliance, disassembling,
assembling and when storing the
appliance.
Keep the Smart Grill™ clean. Follow the
cleaning instructions provided in this
book.
•
•
•
•
•
•
•
BGR820_IB_FA.indd 6 20/7/09 12:24:31 PM

7
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
Any maintenance other than cleaning
should be performed at an authorised
Breville Service Centre.
This appliance is for household use only.
Do not use this appliance for anything
other than its intended use. Do not use
in moving vehicles or boats. Do not use
outdoors. Misuse may cause injury.
The installation of a residual current
device (safety switch is recommended
to provide additional safety protection
when using electrical appliances. It is
advisable that a safety switch with a
rated residual operating current not
exceeding 30mA be installed in the
electrical circuit supplying the appliance.
See your electrician for professional
advice.
•
•
•
BREVILLE RECOMMENDS SAFETY FIRST
Fully unwind the power cord before
use.
Do not let the power cord hand over
the edge of a bench or table, touch hot
surfaces or become knotted.
To protect against electric shock do not
immerse the power cord, power plug or
appliance in water or any other liquid.
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
It is recommended to regularly inspect
the appliance. To avoid a hazard do not
use the appliance if power cord, power
plug or appliance becomes damaged in
any way. Return the entire appliance to
the nearest authorised Breville Service
Centre for examination and/or repair.
•
•
•
•
•
•
BGR820_IB_FA.indd 7 20/7/09 12:24:32 PM

8
KNOW YOUR BREVILLE SMART GRILL™
Open Flat ‘BBQ Mode’
Opens flat into a 1650 sq. cm
grilling surface.
30 Minute Timer Dial with
Sound Alert
Pressing the centre button of the dial
activates the count-down timer.
Cast Aluminium,
Non-Stick Plates
Coated with titanium infused
Quantanium™ for scratch resistance
and oil free cooking.
Removable, Dishwasher
Safe Plates
Flat plate for eggs and
pancakes, ribbed plate to
sear meats.
Bottom ‘Plate Release’
Removes the bottom cooking plate.
Independently remove the top and
bottom cooking plates for easy
cleaning or to interchange plate
positions.
Integrated, Removable
Drip Tray
Catches excess fat for healthier
cooking. In ‘BBQ Mode’, the unique
design drains fat from both plates
into the same drip tray.
Temperature Conversion
Button
Converts the default Celsius
reading to Fahrenheit.
Stainless Steel
Housing with
Die-Cast Arms
BGR820_IB_FA.indd 8 20/7/09 12:24:36 PM

9
KNOW YOUR BREVILLE SMART GRILL™
Locking Storage Clip
Locks the plates closed for upright
storage.
Adjustable Plate Tilt
Adjusts the angle of the bottom
cooking plate to drain fats, or can be
made flat for eggs and pancakes.
Temperature Dial (160°C – 230°C)
With Low, Panini (Sandwich) and Sear
modes.
Temperature
Responsive LCD
Backlight illuminates blue
(stand by) and orange
(heating/ready).
1-Hour Auto Shut-Off
Automatically stops heating the
cooking plates after 1 hour of
no activity.
Cord storage
Located on the underside of the grill.
Top ‘Plate Release’
Removes the top cooking plate
Levelling Support
Integrated into the top ‘Plate
Release’, use to adjust the position
of the floating top plate.
6 Adjustable Height Settings
Reduces the weight of the top plate
on delicate foods or can be set high
enough for open ‘melts’.
Element IQ™
Sensors detect when the cooking plates drop in
temperature and compensate by injecting heat
for rapid recovery back to the selected cooking
temperature. 2400 watt embedded heating
elements ensure consistently high heat for faster
cooking and reduced preheating time.
BBQ Lock Release
BGR820_IB_FA.indd 9 20/7/09 12:24:39 PM

BEFORE FIRST USE
BGR820_IB_FA.indd 10 20/7/09 12:24:42 PM

11
PREPARING THE GRILL FOR USE
Remove and safely discard any packing
material and promotional labels from
the grill.
Wipe the cooking plates and drip
tray with a soft damp sponge. Dry
thoroughly.
Ensure the drip tray is correctly inserted
into the grill.
Ensure the cooking plates are correctly
inserted and securely locked into
position.
NOTE:
The Smart Grill features 2 x ‘Plate
Release’. These allow you to
independently remove the top and
bottom cooking plates for easy
cleaning, or to interchange plate
positions.
To use the ‘Plate Release’:
- Always ensure the grill is
completely cool.
- Use the handle to open the top
plate to a 90 degree position.
- Use the ‘Plate Release’ on the
front, right side of the top plate
to remove the top cooking plate,
and the ‘Plate Release’ on the
left side of the control panel
to remove the bottom cooking
plate.
- Once released, gently slide the
plates off the grill.
1.
2.
3.
4.
NOTE:
If the cooking plates are incorrectly
inserted, the LCD screen will display
‘INSERT PLATE’. Use the 2 x ‘Plate
Release’ to remove the plates then
re-insert so they securely lock into
position. Always ensure the grill is
completely cool before releasing
and removing the cooking plates.
Place the grill on a flat, dry surface.
Ensure there is a minimum distance of
10cm of space on both sides of the
appliance.
Unwind the power cord completely and
insert the power plug into a grounded
wall outlet.
The grill alert will sound and the LCD
screen will display ‘OFF’ and the default
‘0’ zero time.
The grill is now ready for the preheating
cycle.
NOTE:
When the grill is turned on and
heating for the first time, it may emit
a fine smoke haze. This is due to
the protective substances on the
heating elements. It is safe and not
detrimental to the performance of
the grill.
5.
6.
7.
8.
BEFORE FIRST USE
BGR820_IB_FA.indd 11 20/7/09 12:24:42 PM

12
USE IN OPEN FLAT ‘BBQ MODE’
The grill opens flat into a 1650 sq. cm
grilling surface. The ribbed cooking plate
is perfect for searing meats while the flat
cooking plate is ideal for eggs, pancakes
and vegetables.
Ensure the drip tray is correctly inserted
into the grill.
Ensure the cooking plates are correctly
inserted and securely locked into
position.
NOTE:
If the cooking plates are incorrectly
inserted, the LCD screen will display
‘INSERT PLATE’. Use the 2 x ‘Plate
Release’ to remove the plates
then re-insert so they securely
lock into position. Always ensure
the grill is completely cool before
releasing and removing the cooking
plates. Refer to page 11 for more
information on using the
‘Plate Release’.
Place the grill on a flat, dry surface.
Ensure there is a minimum distance of
10cm of space on both sides of the
appliance.
Unwind the power cord completely and
insert the power plug into a grounded
wall outlet.
The grill alert will sound and the LCD
screen will display ‘OFF’ and the default
‘0’ zero time.
1.
2.
3.
4.
5.
To preheat the grill:
Ensure the top plate of the grill is in
the closed, ‘OPEN’ position. This
will ensure faster, more efficient
preheating.
Turn the Temperature Dial to adjust
the temperature in 5°C/10°F
increments. Rotate the dial to ‘SEAR’
(210°C-230°C) for fast preheating,
‘PANINI’(Sandwich) (180°C-205°C),
‘LOW’ (160°C-175°C) or select an
alternative temperature. The grill will
start to heat and the LCD screen
will illuminate orange and display the
selected temperature, ‘HEATING’
and the default ‘0’ zero time.
Allow the grill to preheat.
6.
a)
b)
c)
OPERATING YOUR BREVILLE SMART GRILL™
BGR820_IB_FA.indd 12 20/7/09 12:24:43 PM

13
NOTE:
The Smart Grill features a
Temperature Conversion Button
on the left side of the LCD screen.
The temperature reading on the grill
is preset to Celsius. Pressing the
Temperature Conversion Button
converts the Celsius temperature
reading into Fahrenheit. The
corresponding ‘°C’ or ‘°F’ symbol
will be displayed on the
LCD screen.
NOTE:
If you have changed the default
Celsius temperature reading to
Fahrenheit, the setting will remain in
the memory of the grill until the
Temperature Conversion Button
is pressed a second time or the grill
is unplugged from the wall outlet.
When the grill is plugged back into
the wall outlet, the temperature
reading will automatically return to
the preset Celsius setting.
NOTE:
The bottom plate can be used in the
‘FLAT’ or ‘ANGLE’ position when the
grill is used in the open ‘BBQ Mode’.
Once the grill has preheated to the
selected temperature. The word
“HEATING” will disappear and an
alert will sound and the selected
temperature and the default ‘0’ zero
time will be displayed.
7.
NOTE:
Always allow the grill to completely
preheat to the selected temperature
before cooking.
NOTE:
The LCD illumination may display
“HEATING” during the cooking
process. This is normal, indicating
that the correct temperature is
being maintained.
To open the grill into ‘BBQ Mode’:
Ensure the grill has completely
preheated and the “HEATING” is not
displayed (ready).
Ensure the top cooking plate is in
the closed, ‘OPEN’ position. It must
be in the ‘BBQ Mode’ position to
release the lock and open the grill
into ‘BBQ Mode’.
With your left hand, grip the handle.
With your right hand, pull the
Adjustable Height Control clip on
the right side of the grill towards
you, into the ‘BBQ Mode’ position.
Continue to pull the clip forward and
simultaneously lift the handle to open,
then gently lower the top plate into
the horizontal ‘BBQ Mode’ position.
8.
a)
b)
c)
OPERATING YOUR BREVILLE SMART GRILL™
BGR820_IB_FA.indd 13 20/7/09 12:24:43 PM

14
NOTE:
When the top plate is closed, it will
automatically return the top plate
to the ‘OPEN’ position. To unlock
the top plate, pull the Adjustable
Height Control clip on the right side
of the grill towards you and into the
‘OPEN’ position.
- When using the grill in ‘BBQ
Mode’, continue to pull the clip
forward and simultaneously lift
the and lower the handle .
- When using the grill as a contact
grill or panini press, release the
clip and simultaneously lift the
handle.
Place food on either or both of the
cooking plates. Refer to Grilling Tips
(page 20) and Recipes (page 28).
NOTE:
Do not use spray-on, non-stick
coatings as these will affect the
performance of the non-stick
cooking plates.
9.
NOTE:
The LCD illumination may display
“HEATING” during the cooking
process. This is normal, indicating
that the correct temperature is
being maintained.
The Smart Grill features an optional
count-down timer which monitors
the time elapsed during cooking. To
activate the count-down timer:
Ensure the grill has completely
preheated, the “HEATING” is not
displayed and food has been placed
on the cooking plates.
Turn the Timer Dial to adjust the time
in one minute increments up to 30
minutes. Rotate the dial clockwise
to increase the time, or counter-
clockwise to reduce the time. The
LCD screen will display the selected
time.
Press the centre button of the Timer
Dial once to activate the setting. The
LCD screen will display a count-
down indicator and the time will
begin to count down.
10.
a)
b)
c)
OPERATING YOUR BREVILLE SMART GRILL™
BGR820_IB_FA.indd 14 20/7/09 12:24:44 PM

15
NOTE:
The count-down timer can be
stopped or paused at any time by
pressing the centre button of the
Timer Dial a second time. The LCD
screen will no longer display the
count-down indicator. However, the
grill will not turn off, it will remain
heating.
To reset or clear the timer either:
- Rotate the Timer Dial clockwise
to increase the time, or counter-
clockwise to reduce the time. Or,
- Press the centre button of the
Timer Dial and hold for 3 seconds
until the time on the LCD screen
displays ‘0’ zero. Rotate the
Timer Dial clockwise to increase
the time, or counter-clockwise to
reduce the time.
Once the selected time has elapsed,
the grill alert will sound and the
default ‘0’ zero time will be displayed.
However, the grill will not turn off. It
will remain heating, maintaining the
selected temperature, ready for the
next cooking cycle.
NOTE:
The cooking and heating cycle can
be stopped at any time by turning
the Temperature Dial to the ‘OFF’
position. The LCD screen will
display ‘OFF’ and the default ‘0’
zero time. Allow the grill to cool
completely and disconnect from the
wall outlet.
12.
NOTE:
The Breville Smart Grill features a
1-Hour Auto Shut-Off feature. This
ensures the grill is not accidentally
left on for an extended period of
time. If the Temperature or Timer
Dials are not adjusted within 1
hour, the Auto Shut-Off feature
will automatically stop heating the
cooking plates. The LCD screen
will display ‘OFF’ for 5 minutes
then cease to illuminate. However,
the default display - ‘OFF’ and ‘0’
zero time – will still be visible. To
re-activate the grill, adjust the
Temperature or Timer Dials.
When the food is cooked, remove from
the cooking plates using heat proof
plastic or wooden utensils.
NOTE:
Never use metal or sharp utensils
as these can cause damage to the
non-stick coating of the cooking
plates.
FULLY UNWIND THE POWER
CORD FROM THE CORD
STORAGE BEFORE USE.
13.
OPERATING YOUR BREVILLE SMART GRILL™
BGR820_IB_FA.indd 15 20/7/09 12:24:44 PM

16
USE AS A CONTACT GRILL OR
SANDWICH PRESS
Ensure the drip tray is correctly inserted
into the grill.
Ensure the cooking plates are correctly
inserted and securely locked into
position.
NOTE:
If the cooking plates are incorrectly
inserted, the LCD screen will display
‘INSERT PLATE’. Use the 2 x ‘Plate
Release’ to remove the plates
then re-insert so they securely
lock into position. Always ensure
the grill is completely cool before
releasing and removing the cooking
plates. Refer to page 11 for more
information on using the ‘Plate
Release’.
Place the grill on a flat, dry surface.
Ensure there is a minimum distance of
10cm of space on both sides of the
appliance.
Unwind the power cord completely and
insert the power plug into a grounded
wall outlet.
The grill alert will sound and the LCD
screen will display ‘OFF’ and the default
‘0’ zero time.
1.
2.
3.
4.
5.
To preheat the grill:
Ensure the top plate of the grill is in
the closed, ‘OPEN’ position. This
will ensure faster, more efficient
preheating.
Turn the Temperature Dial to adjust
the temperature in 5°C/10°F
increments. Rotate the dial to ‘SEAR’
(210°C-230°C) for fast preheating,
‘PANINI’(Sandwich) (180°C-205°C),
‘LOW’ (160°C-175°C) or select an
alternative temperature. The grill will
start to heat and the LCD screen
will illuminate orange and display the
selected temperature, ‘HEATING’
and the default ‘0’ zero time.
Allow the grill to preheat.
6.
a)
b)
c)
OPERATING YOUR BREVILLE SMART GRILL™
BGR820_IB_FA.indd 16 20/7/09 12:24:44 PM

17
NOTE:
The Smart Grill features a
Temperature Conversion Button
on the left side of the LCD screen.
The temperature reading on the grill
is preset to Celsius. Pressing the
Temperature Conversion Button
converts the Celsius temperature
reading into Fahrenheit. The
corresponding ‘°F’ or ‘°C’ symbol
will be displayed on the LCD screen.
If you have changed the default
Celsius temperature reading to
Fahrenheit, the setting will remain in
the memory of the grill until the
Temperature Conversion Button
is pressed a second time or the grill
is unplugged from the wall outlet.
When the grill is plugged back into
the wall outlet, the temperature
reading will automatically return to
the preset Celsius setting.
While the grill is preheating, adjust
the angle of the bottom cooking plate
to the desired position by turning the
Plate Tilt Dial. The Plate Tilt Dial is
located on the lower back, right side of
the grill.
NOTE:
We recommend using:
- The ‘ANGLE’ position to drain
fats for healthier cooking.
- The ‘FLAT’ position for cooking
eggs, pancakes, Turkish bread,
foccacias and leaner meats.
7.
Once the grill has preheated to the
selected temperature, the temperature
alert will sound. The “HEATING” display
will turn off and display the selected
temperature and the default
‘0’ zero time.
NOTE:
Always allow the grill to completely
preheat to the selected temperature
before cooking.
NOTE:
The LCD illumination may display
“HEATING” during the cooking
process. This is normal, indicating
that the correct temperature is
being maintained.
Use the handle to open the top plate to
a 90 degree position.
8.
9.
OPERATING YOUR BREVILLE SMART GRILL™
BGR820_IB_FA.indd 17 20/7/09 12:24:45 PM

18
NOTE:
When the top plate is closed, it will
automatically return the top plate
to the ‘OPEN’ position. If the grill
is in the ‘LOCK’ position, pull the
Adjustable Height Control clip on
the right side of the grill towards
you and into the ‘OPEN’ position.
- When using the grill as a contact
grill or panini press, release the
clip and simultaneously lift the
handle.
- When using the grill in ‘BBQ
Mode’, continue to pull the clip
forward and simultaneously lift
the and lower the handle.
Place food on the bottom cooking
plate.
NOTE:
Do not use spray-on, non-stick
coatings as these will affect the
performance of the non-stick
cooking plates.
NOTE:
For best cooking results when
toasting sandwiches on the ‘PANINI’
setting.
- Always place sandwiches in the
centre bottom plate.
- Toasting should take
approximately 5-8 minutes. Exact
toasting time will be a matter of
preference and the type of bread
and fillings used. For more tips
and tricks, refer to Grilling Tips
(page 20) and Recipes (page 28).
10.
NOTE:
The LCD illumination may display
“HEATING” during the cooking
process. This is normal, indicating
that the correct temperature is
being maintained.
Use the handle to close the top
cooking plate. The top cooking plate
has two features designed to produce
optimum cooking results:
Floating Top Plate. The top
cooking plate is hinged, allowing
the top plate to be positioned
horizontally on the food surface. This
ensures the front of the food is as
evenly cooked as the back. It also
allows the top plate to float above
the food surface, radiating heat to
create open sandwich style ‘melts’.
NOTE:
The surfaces of the grill are hot
during and after operation. Always
use the integrated Leveling Handle/
‘Plate Release’ on the front, right
side of the top cooking plate when
adjusting the position of the top
plate. Alternatively, use protective
hot pads or insulated oven mitts.
NOTE:
Never use the Leveling Handle to
open the top cooking plate. Always
use the handle to open and close
the top cooking plate.
11.
a)
OPERATING YOUR BREVILLE SMART GRILL™
BGR820_IB_FA.indd 18 20/7/09 12:24:45 PM

19
NEVER GRIP THE LEVELING
SUPPORT OR USE IT TO OPEN
THE TOP COOKING PLATE.
ALWAYS USE THE GRILL
HANDLE TO OPEN AND CLOSE
THE TOP COOKING PLATE.
Adjustable Height Control. This
feature reduces the weight of the top
plate on delicate foods like fish and
accommodates varying thicknesses
of food like artisan breads. Located
on the right side of the top plate,
the clip fixes the top plate to a
range of positions above the bottom
plate. To set the Adjustable Height
Control, use the handle to lift the top
plate and simultaneously move the
Adjustable Height Control clip to the
desired height. Then slowly lower
the top plate until it rests on the
Adjustable Height Control clip.
The Smart Grill features an optional
count-down timer which monitors
the time elapsed during cooking. To
activate the count-down timer:
Ensure the grill has completely
preheated, the “HEATING” display
has turned off and food has been
placed on the bottom cooking plate.
b)
12.
a)
Turn the Timer Dial to adjust the time
in one minute increments up to 30
minutes. Rotate the dial clockwise
to increase the time, or counter-
clockwise to reduce the time. The
LCD screen will display the selected
time.
Press the centre button of the Timer
Dial once to activate the setting. The
LCD screen will display a count-
down indicator and the time will
begin to count down.
NOTE:
The count-down timer can be
stopped or paused at any time by
pressing the centre button of the
Timer Dial a second time. The LCD
screen will no longer display the
count-down indicator. However, the
grill will not turn off, it will remain
heating.
To reset or clear the timer either:
- Rotate the Timer Dial clockwise
to increase the time, or counter-
clockwise to reduce the time. Or,
- Press the centre button of the
Timer Dial and hold for 3 seconds
until the time on the LCD screen
displays ‘0’ zero. Rotate the
Timer Dial clockwise to increase
the time, or counter-clockwise to
reduce the time.
Once the selected time has elapsed,
the grill alert will sound and the
default ‘0’ zero time will be displayed.
However, the grill will not turn off. It
will remain heating, maintaining the
selected temperature, ready for the
next cooking cycle.
b)
c)
13.
OPERATING YOUR BREVILLE SMART GRILL™
BGR820_IB_FA.indd 19 20/7/09 12:24:45 PM

20
NOTE:
The cooking and heating cycle can
be stopped at any time by turning
the Temperature Dial to the ‘OFF’
position. The LCD screen will cease
to illuminate, displaying ‘OFF’ and
the default ‘0’ zero time. Allow
the grill to cool completely and
disconnect from the wall outlet.
NOTE:
The Breville Smart Grill features a
1-Hour Auto Shut-Off feature. This
ensures the grill is not accidentally
left on for an extended period of
time. If the Temperature or Timer
Dials are not adjusted within 1
hour, the Auto Shut-Off feature
will automatically stop heating the
cooking plates. The LCD screen
will display ‘OFF’ for 5 minutes
then cease to illuminate. However,
the default display - ‘OFF’ and ‘0’
zero time – will still be visible. To
re-activate the grill, adjust the
Temperature or Timer Dials.
When the food is cooked, remove from
the cooking plates using heat proof
plastic or wooden utensils.
NOTE:
Never use metal or sharp utensils
as these can cause damage to the
non-stick coating of the cooking
plates.
FULLY UNWIND THE POWER
CORD FROM THE CORD
STORAGE BEFORE USE.
14.
GRILLING TIPS
GRILLING TIPS
Meats
Recommended Cuts:
Beef - Sirloin (New York), Rump, Rib
Eye (Scotch Fillet), Fillet.
Lamb - Trim Lamb Leg Steaks, Fillet,
Eye of Loin, Cutlets and Diced Lamb.
Pork - Butterfly Loin Steaks, Spare
Ribs, Leg Steaks, Fillets, Diced Pork.
It is not recommended to cook items
with thick bones such as T-bone
steaks.
Tougher cuts such as beef blade,
topside steak, lamb forequarter or
neck chops can be used. To tenderize
these cuts, marinate them for a few
hours or overnight in a marinade with
wine or vinegar to help break down the
connective tissue.
If using a marinade recipe or
pre-marinated meats from your meat
retailer, drain excess marinade off and
dab the meat with paper towels before
placing on the grill. Some marinades
contain high sugar levels which can
scorch on the cooking plate.
Do not salt meat before cooking. Salt
will draw out the juices, toughening the
meat.
Do not pierce meat with a fork or cut
meat while cooking. This will let the
juices escape, resulting in a tougher,
dry steak. Use tongs instead.
Do not over cook meat. Some meats
are better served pink and juicy.
Parboiling sausages can alleviate
the need to pierce sausages before
cooking.
When removing fish pieces from the
grill, use a flat heat resistant plastic
spatula to support the food.
•
•
•
•
•
•
•
•
•
•
•
•
BGR820_IB_FA.indd 20 20/7/09 12:24:45 PM