Breville Easy Glide VIN290 User manual

2200W
steam iron
instruction booklet

2
product safety
Please read these instructions before operating the appliance and retain them for
future use.
!This product is not suitable for use by children, and may not be suitable for persons
requiring supervision unless they receive instruction by a competent person on how to
safely use the product. Children should be supervised to ensure that they do not play
with the product.
!Never use this appliance for anything other than its intended use. This appliance is for
household use only. Do not use this appliance outdoors.
!Always ensure that hands are dry before handling the plug or switching on the
appliance.
!Never leave the appliance unattended when it is connected to the mains supply.
!Ensure the appliance is switched off and unplugged from the supply socket before
lling or emptying the water tank, after use and before cleaning.
!Do not use the appliance if it has been dropped, if there are any visible signs of
damage or if it is leaking.
!Always use the appliance on a stable, secure, dry and level surface. When placing the
appliance on its stand, ensure that the surface on which the stand is placed is stable.
!Do not touch the metal parts of the appliance during use as they may become very hot.
!Never operate the appliance by means of an external timer or separate remote-control
system.
!This appliance must not be placed on or near any potentially hot surfaces (such as a
gas or electric hob).
!The power cord is not replaceable by the user. Always return the appliance if the power
cord is damaged to avoid any hazard.
!Always allow the appliance to cool before cleaning or storing.
!Never immerse any part of the appliance or power cord and plug in water or any other
liquid.
!Never let the power cord hang over the edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.

3
features
1. Water tank inlet cover
2. Steam control
3. Shot of steam button
4. Spray button
5. Temperature selector
6. Indicator light
7. Flexible cord protector
8. Heel rest
9. Cord wrap
10. Stainless steel soleplate
11. Pointer
12. Water level maximum indicator
13. Water tank
14. Spray nozzle
q wer
o
asd
t y
u
i
f
g
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.

4
before first use
Remove all packaging including any soleplate protection before using your iron.
Wipe over the soleplate with a cloth moistened with methylated spirit. Wipe off the
methylated spirit with a damp cloth then dry the soleplate thoroughly.
Fill the water tank and then empty it. This will rinse out any foreign particles remaining in
the water tank from the manufacturing process. Never ll your iron by holding it directly
under a tap, always use a jug.
Before connecting your iron to the mains supply, make sure your supply voltage is the
same as the one indicated on your iron.
When you rst use your iron, there may be a slight odour and it may smoke slightly for the
rst few minutes of operation. This is quite normal and will disappear.

5
filling your iron
Never add fabric conditioner, starches or any other chemicals to the water in
your iron.
1. Ensure your iron is switched off and unplugged from the mains supply socket.
2. Set the steam control to the no steam position (0).
3. Open the water tank inlet cover.
4. Fill the water tank with ordinary tap water. To avoid air locks, tilt your iron slightly
while lling it.
5. Don’t ll your iron above the water level indicator MAX marking. Check the water
level by standing your iron on its heel.
6. When your iron is lled, close the water tank inlet cover.