Breville PressXpress VIN410 Series User manual

PressXpress®
VIN410
2400W steam generator
VIN410_19EM2 (UK).indd 1VIN410_19EM2 (UK).indd 1 11/29/19 09:4111/29/19 09:41

32
Important Safety Information
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
This appliance can be used by children aged 8 years
and above and by persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
Keep the appliance and its cord out of the reach of
children less than 8 years old when it is switched on or
cooling down.
Never use this appliance for anything other than its
intended use. This appliance is for household use
only. Do not use this appliance outdoors.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
The appliance must not be left unattended when it is
connected to the mains supply.
The appliance must be unplugged from the mains
supply socket before lling the water tank with water.
Always use the appliance on a stable, secure, dry and
level surface. When placing the appliance on its stand,
ensure that the surface on which the stand is placed is
stable.
Do not use the appliance if it has been dropped, if
there are any visible signs of damage or if it is leaking.
!Always ensure that hands are dry before handling the plug or switching on the
appliance.
!Do not touch the metal parts of the appliance during use as they may become
very hot.
!This appliance must not be placed on or near any potentially hot surfaces
(such as a gas or electric hob).
!Always allow the appliance to cool before cleaning or storing.
!Never immerse any part of the appliance or power cord and plug in water or any
other liquid.
!Never let the power cord hang over the edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.
!Always place the iron on the base station when not in use.
Before using for the rst time
Warning: Remove all packaging including any soleplate protection before
operating your steam generator.
1. Wipe over the soleplate with a soft cloth.
2. Position the iron handset eon the base station a, on your ironing board (if it
is large enough) or on a heat resistant and secure surface at the same height as
your ironing board.
3. Before connecting your steam generator to the mains supply, make sure your
supply voltage is the same as the one indicated on your steam generator.
4. Whenyourstuseyoursteamgenerator,theremaybeaslightodouranditmay
smokeslightlyfortherstfewminutesofoperation.Thisisquitenormalandwill
disappear.
IMPORTANT:Onrstusethewatersystemwillneedprimingbeforethe
handset will create steam. It is necessary to operate the steam boost function a few
times before the unit will be ready to create steam. To operate the steam boost function,
double-click the steam trigger rquickly a number of times untill steam is produced.
Cleaning your steam generator before use
Follow these simple steps to remove any impurities or residues inside your steam
generator that may be left over from the manufacturing process.
1. Followtheinstructionsunderllingyoursteamgeneratorandllthewatertank
ias described.
1. Clean indicator light / Self-clean button
2. Temperature indicator light
3. Iron handset
4. Steam trigger
5. Temperature control dial
6. Lock button
7. Unlock button
8. Removable water tank
9. Power switch (I/O)
10. Base station
11. Steam cord
12. Power cord
13. Cleaning tray
i
d
f
o
a
q
wer
t
y
s
u
VIN410_19EM2 (UK).indd 2-3VIN410_19EM2 (UK).indd 2-3 11/29/19 09:4111/29/19 09:41

54
2. Emptythewatertanktorinseoutanyforeignparticlesthenrellit.
3. Follow the instructions under steam ironing. Set the temperature to the MAX
setting t.
4. Iron an old piece of cloth (cotton or towels is ideal) for a few minutes. While
ironing, press the steam trigger r4or5times.Uponrstusagethepumpwill
need priming and you may need to hold the steam trigger to pull water through
the system and create steam.
5. Anyimpuritieswillbeushedfromyourironbythesteamandabsorbedbythe
cloth. Your iron is now ready for use.
Filling your steam generator
1. Remove the water tank iby holding the handle and pulling the tank forwards
from the base station a.
2. Slide the water tank out.
3. Fill the water tank with cold tap water to the MAX mark.
4. Slide the water tank back into the base unit until it latches securely into place. You
should hear an audible click.
Filling during use
Youcanllyoursteamgeneratorduringuse.Simplyremovethewatertankias
describedaboveandaddwaterasrequired.DonotllpasttheMAXindicatormarkon
the tank.
Your steam generator will beep twice and the power indicator light owillashtolet
youknowthatthewatertankneedslling.
Steam ironing
The smart features of the iron prevent you from creating steam in temperature settings
below●●.Thisistoensurethatdelicatefabricsareprotectedfromironingwithsteam.
It is recommended that for harder to iron fabrics such as cotton and linen, steam should
be used when ironing.
Warning: When ironing delicate fabrics like nylons, acrylics and synthetics.
Steam should never be used.
1. Fill the water tank iwith water.
2. Plug your steam generator into the mains supply and press the on (I) /off (O)
button oto switch your steam generator on.
3. Rotate the temperature control dial ttosetthepointertobetweenthe●●
setting and the maximum heat (MAX) setting.
4. The temperature indicator light wwill pulse as your steam generator heats up.
When the temperature indicator light turns solid your steam generator is ready to
use.
5. With the soleplate in contact with the garment, press the steam trigger rfor a
couple of seconds. It is not necessary to hold the trigger down continuously as
steam will still be emitted from the soleplate for a short time after the trigger has
been released. If more steam is required, press the steam trigger again.
6. To operate the steam boost function, double-click the steam trigger quickly. The
iron will generate a highly concentrated steam boost for a short period of time.
Always release the steam trigger and allow any residual steam to be released before
replacing the iron on its stand.
Ironing without steam
Ifyouintendtodry-ironfabrics,thereisnoneedtollthewatertank.However,ifwater
is already in the water tank, you do not need to empty it.
1. Rotate the temperature control dial tto set the pointer to the desired heat
setting.
2. When the temperature indicator light wturns solid your steam generator is ready
to use.
3. Iron your laundry without pressing the steam trigger r.
Vertical steam ironing
Vertical steam ironing is especially useful for ironing items such as curtains while they
are hanging, or jackets, suits and coats.
Selectatemperaturesettinghigherthan●●t. Once the temperature indicator light
wturnssolid,yourproductisreadytouse.Holdtheironinaverticalpositionand
press the steam trigger ras required.
Warning: Hot steam is emitted from the soleplate. Do not iron/steam a
garment whilst wearing it. Do not operate steam in the direction of yourself or
anybody else.
Auto-off function
The iron has an auto-off safety function that will operate when your appliance has not
been used for 5 mins. The unit will enter a sleep mode and all the lights will turn off. To
restart simply pull the steam trigger r. The unit will restart and may need a short time
to reheat to the desired temperature, which will be indicated by the pulsing temperature
indicator light w.
Important
Your steam generator takes time to heat up and cool down. If you change the
temperature setting on your steam generator, you must give it time to adjust to the new
setting.
This is especially important when you change from a high setting to a lower one. It
takes your steam generator longer to cool down than it does to heat up and this is the
reason we recommend that you begin ironing at lower temperatures.
Forexample,youhavebeenironingusingthe●●●settingandwishtochangetothe
●●setting:
1. Turn the temperature control dial ttosetthepointertothe●●setting.Initially,
the temperature indicator light wmay pulse while the unit adjust to the new
temperature.
2. Wait until the temperature indicator light comes on solidly again. Your steam
generator has now cooled to the correct temperature.
Care and cleaning
Warning: Do not use harsh abrasives, chemical cleaners or solvents to clean
the exterior of your iron.
Allow your iron to completely cool down and wipe the soleplate with a soft damp cloth. If
polyester has burnt to the soleplate, iron a damp cotton cloth while your iron is still hot.
Wipe over the rest of your iron with a soft damp cloth then wipe dry. Do not immerse the
appliance or power cord or plug in water or any other liquid.
Self-cleaning
Only activate the self-clean when you want to activate the self-cleaning
system. Never activate the self-clean function when ironing.
The self-clean function removes scale and impurities. The steam generator has an
intelligent reminder cleaning mode which activates after continuous steam ironing over
a total of 25 hours. If you are in a hard water area you can perform the cleaning cycle
sooner than the allocated 25 hours by following the steps below.
The cleaning indicator light qwill illuminate to remind users to clean the machine.
1. To activate the self-clean function, adjust the temperature control knob tto the
Max setting. Press and hold the self-clean button qfor 3 seconds. The clean
indicatorlightwillash.Placetheironhandseteon the cleaning tray fand
pull the steam trigger ronce then remove hands from the handset, this will
initiate the cleaning function.
2. Hotwaterandsteamwillbeejectedfromtheholesinthesoleplatealongwithany
impurities. During the cleaning process there is no need to hold the product.
VIN410_19EM2 (UK).indd 4-5VIN410_19EM2 (UK).indd 4-5 11/29/19 09:4111/29/19 09:41

76
Electrical safety
This appliance must be earthed.
ThisapplianceisttedwitheitheramouldedorrewirableBS1363,13ampplug.The
fuse should be ASTA approved to BS1362. If the fuse in a moulded plug needs to be
changed,thefusecovermustberetted.Theappliancemustnotbeusedwithoutthe
fusecovertted.
If the plug is unsuitable, it should be
dismantled and removed from the supply
cordandanappropriateplugttedas
detailed below. If you remove the plug
it must not be connected to a 13 amp
socket and the plug must be disposed of
immediately.
If any other plug is used, a 13 amp fuse
mustbettedeitherintheplugoradaptor
or at the distributor board.
3. The cleaning cycle takes approximately 1 minute. When the clean indicator light
stopsashing,thecleaningcycleiscomplete,andyoucanswitchoffyourunit
and store when cooled.
4. To cancel the self-clean function, press and hold the self-clean button for 3
seconds.Thecleanindicatorlightwillstopashing.
WARNING: Do not attempt to pick up the handset while the clean indicator
light is ashing as hot water and steam may be ejected. Only remove from the
cleaning tray once the clean indicator light has stopped ashing and you have
switched off the power. Always use the cleaning tray provided and do not leave
unattended during the clean cycle.
Troubleshooting
Issue Root cause Possible solution
The iron does not
produce steam.
Water tank level is too low.
Your steam generator will
beep twice, and the power
indicatorlightwillashtolet
you know that the water tank
needslling.
Fill water tank.
Water tank is not fully inserted
to the base station. Check if
powerlightisashing.
Remove and re-insert the
water tank until an audible
click is heard.
Ifitisonrstusetheunitmay
have not been primed.
Operate the steam boost a
few times by double-clicking
the steam trigger in quick
succession.
The unit is still heating up.
The steam will only operate
when the temperature
indicator light is solid. Check if
lightisashing.
Wait until the temperature
indicatorlightstopsashing
and turns to solid.
Brown particles
are emitted from
the soleplate
The handset needs to be
de-scaled.
Operate the self-clean
process. Follow instructions
provided in “Self-cleaning”
section.
No display lights
are showing.
Steam generator has not used
steam function for 5 minutes
and entered auto-off mode.
Pull the steam trigger. Unit
should come out of auto-off
mode. You may need to wait
a short time for unit to heat
up before it can produce
steam. When the temperature
indicator light turns solid the
unit is ready for use.
For further troubleshooting and FAQs visit www.breville.co.uk/faqs
After sales service and replacement parts
In the case the appliance does not operate but is under warranty, return the product
to the place it was purchased for a replacement. Please be aware that a valid form of
proof of purchase will be required. For additional support, please contact our Consumer
Service Department at 0800 028 7154 or email:
[email protected].
Waste disposal
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. E-mail us at [email protected] for further
recycling and WEEE information.
Blue
(Neutral)
Brown
(Live)
13A Fuse
Green/Yellow
(Earth)
VIN410_19EM2 (UK).indd 6-7VIN410_19EM2 (UK).indd 6-7 11/29/19 09:4111/29/19 09:41

VIN410_19EM2 (UK) P.N. 200687 Rev. A
GCDS-BRE-JC
Jarden Consumer Solutions (Europe) Limited
5400 Lakeside, Cheadle Royal Business Park,
Cheadle, SK8 3GQ, United Kingdom
Newell Poland Services Sp. z o.o.,
Plac Andersa 7, Poznan, 61-894, Poland.
e-mail: [email protected]
United Kingdom Telephone: [phone]
© 2020 Jarden Consumer Solutions (Europe) Limited. All rights reserved.
Jarden Consumer Solutions (Europe) Limited, 5400 Lakeside, Cheadle Royal
Business Park, Cheadle, Cheshire, SK8 3GQ, United Kingdom.
Newell Poland Services Sp. z o.o., Plac Andersa 7, Poznan, 61-894, Poland.
Jarden Consumer Solutions (Europe) Limited and Newell Poland Services Sp. z
o.o. are subsidiaries of Newell Brands Inc.
The product you buy may differ slightly from the one shown on this carton due to
continuing product development.
Made in China.
VIN410_19EM2 (UK).indd 8VIN410_19EM2 (UK).indd 8 11/29/19 09:4111/29/19 09:41