Breville Technique User manual

www.breville.co.uk

2
Please read these instructions before operating the appliance and retain them for
future use.
This product is not suitable for use by children, and may not be suitable for persons
requiring supervision unless they receive instruction by a competent person on how to
safely use the product. Children should be supervised to ensure that they do not play
with the product.
Never use this appliance for anything other than its intended use. This appliance is for
household use only. Do not use this appliance outdoors.
Always ensure that hands are dry before handling the plug or switching on the
appliance.
Never leave the appliance unattended when it is connected to the mains supply.
Ensure the appliance is switched off and unplugged from the supply socket before
lling or emptying the water tank, after use and before cleaning.
Do not use the appliance if it has been dropped, if there are any visible signs of
damage or if it is leaking.
Always use the appliance on a stable, secure, dry and level surface. When placing the
appliance on its stand, ensure that the surface on which the stand is placed is stable.
Do not touch the metal parts of the appliance during use as they may become very hot.
This appliance must not be placed on or near any potentially hot surfaces (such as a
gas or electric hob).
The power cord is not replaceable by the user. Always return the appliance if the power
cord is damaged to avoid any hazard.
Always allow the appliance to cool before cleaning or storing.
Never immerse any part of the appliance or power cord and plug in water or any other
liquid.
Never let the power cord hang over the edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.
!
!
!
!
!
!
!
!
!
!
!
!
!
product safety

3
features
q we r
o
a
sdfg
Water tank inlet cover
Steam control
Shot of steam button
Spray button
Power / auto shut-off function light
Temperature selector
Temperature indicator light
Flexible cord protector
1.
2.
3.
4.
5.
6.
7.
8.
y u i
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
Heel rest
Cord wrap
Ceramic soleplate
Self clean button
Water level maximum indicator
Pointer
Water tank
Spray nozzle
9.
10.
11.
12.
13.
14.
15.
16.
t
h
j

4
before rst use
Remove all packaging including any soleplate protection before heating the
iron.
Wipe over the soleplate with a cloth moistened with methylated spirit. Remove the
methylated spirit with a damp cloth then dry the soleplate thoroughly.
Fill the water tank and then empty it. This will rinse out any foreign particles remaining in
the water tank from the manufacturing process. Never ll your iron directly under a tap.
Always use the measuring cup supplied.
Before connecting your iron to the mains supply, make sure your supply voltage is the
same as the one indicated on your iron.
When you rst use your iron, there may be a slight odour and it may smoke slightly for the
rst few minutes of operation. This is quite normal and will disappear.

5
lling your iron
Never add fabric conditioner, starches or any other chemicals to the water in
your iron.
Ensure the iron is switched off and unplugged from the mains supply socket.
Set the steam control to the no steam position ( ).
Place your iron horizontally on a at, stable, dry, heat resistant and level surface and
open the water tank inlet cover.
Fill the water tank with ordinary tap water. To avoid air locks, tilt your iron slightly
while lling it.
Don’t ll the iron above the water level indicator MAX marking. Check the water level
by standing the iron on its heel.
When the iron is lled close the water tank inlet cover.
1.
2.
3.
4.
5.
6.

6
using your iron
We recommend that you:
Start by ironing those items of laundry that require the lowest temperature (e.g.
synthetics). Finish by ironing fabrics which respond best to higher temperatures and
steam—such as cotton and linen.
If you iron a fabric made of a blend of bres set the temperature of your iron to the
most delicate bre.
Never use the burst of steam button on silks or synthetics.
When using starch, it should be sprayed onto the reverse side of the fabric and the
soleplate cleaned more frequently.
Do not iron over sharp or hard objects such as buttons, studs or zippers as they will
scratch the soleplate of your iron.
Important
Your iron takes time to heat up and cool down. If you change the temperature setting on
your iron, you must give it time to adjust to the new setting.
This is especially important when you change from a high setting to a lower one. It
takes your iron longer to cool down than it does to heat up and this is the reason we
recommend that you begin ironing at lower temperatures.
If you do need to reduce the temperature of your iron, wait until the temperature indicator
light comes on and then goes off again before ironing. This will ensure that your iron has
reached the lower temperature and is not too hot for the fabric being ironed.
For example, you have been ironing using the lll setting and want to change to the ll
setting:
Move the temperature control dial to the ll setting. Initially, the temperature indicator
light will not be lit because your iron is still at a higher temperature.
Wait until the temperature indicator light comes on and then goes out again. Your iron
has now cooled to the correct temperature.
•
•
•
•
•
1.
2.

7
using your iron
Ironing without steam
If you intend to dry-iron fabrics there is no need to ll the water tank. However, if water is
already in the water tank, you don’t need to empty it.
Set the steam control to the no steam position ( ) position.
Plug your iron into the mains supply and switch on.
Rotate the temperature control dial until the desired setting is aligned with the
indicator light/dial pointer.
The temperature indicator light will illuminate while your iron is heating up. When the
light goes out, your iron is ready to use.
Steam ironing
During steam ironing, if you do not allow your iron to reach the selected
temperature water may drip from the soleplate.
It is recommended that for harder to iron fabrics such as cotton and linen, steam should
be used when ironing.
When ironing cotton and linen, always select the highest temperature. Steam should
never be used on delicate fabrics like nylons, acrylics and synthetics.
Fill your iron with water.
Plug your iron into the mains supply and switch on.
Set the temperature control dial so it is within the steam range (ll or lll). The
hotter your iron, the more steam is generated.
The temperature indicator light will illuminate. When the temperature indicator light
goes out your iron is ready to use. The temperature indicator light will turn on and off
during ironing as your iron maintains the correct temperature.
Adjust the steam control lever to select the desired steam output.
Move the steam control lever backwards to increase the amount of steam, or
forwards to decrease the amount of steam.
The steam can be shut off at any time by setting the steam control to the no steam
( ) position.
Burst of steam
The temperature control dial must be set within the ll and lll setting. Wait several
seconds between each press of the steam button.
Press the shot of steam button whenever you have a stubborn crease that needs extra
steam. Steam will burst from the holes in the soleplate of your iron into the fabric.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.

8
using your iron
Vertical steam ironing
Never iron garments when they are being worn.
Your iron can be used for vertical steam ironing curtains, dresses on hangers etc.
Fill your iron with water.
Plug your iron into the mains supply and switch on.
Set the temperature control dial so it is within the steam range (ll or lll). The
hotter your iron, the more steam is generated.
The temperature indicator light illuminates to show that your iron is heating. When
the temperature indicator light goes out, your iron is ready to use.
Hold your iron 15cm (6 inches) from the fabric.
Press the shot of steam button. The steam will penetrate the fabric removing the
creases. To apply more steam press the shot of steam button again.
Precondition steam
Keep children away from the front of the iron and do not hold your ngers in
front of the soleplate when using the precondition steam feature.
For difcult areas (e.g. collars, cuffs, pockets, etc.) press the burst of steam button. The
special steam channels in the soleplate deliver more steam around the front part of the
iron preconditioning the fabric before you iron it for easier and faster ironing.
Spraying
The spray function will only operate when there is water in the water tank.
The water spray can be used to help iron heavy fabrics or difcult areas (collars,
pockets, sleeves, creases, etc). It can also be used when ironing delicate fabrics
which cannot be steam ironed.
Simply press the button as required to produce a spray of water. If the spray is being
used for the rst time, or if the iron has been standing for some time, you may need
to press the spray button a few times before it works correctly.
Anti-drip feature
When the temperature of your iron is insufcient to create steam, the supply of water is
cut off automatically to avoid any drips from the soleplate.
1.
2.
3.
4.
5.
6.
1.
2.

9
using your iron
Anti-scale lter
Your iron is tted with a permanent anti-scale lter. This lter is xed and cannot be
removed for cleaning.
The lter is designed to reduce the build-up of limescale inside your iron. Limescale
occurs during steam ironing due to water hardness.
Water hardness varies from one area to another. The effectiveness of the lter will
depend on how ‘hard’ your water is.
Safety auto shut-off function
ALWAYS disconnect your iron from the mains supply socket after use. NEVER
leave the iron unattended with the Auto Shut-off function in operation.
Your iron will shut off if it has not been used for 10 minutes when resting on its heel, or
after 30 seconds if it is resting on its soleplate. The power/auto shut-off function light in
the iron handle will start to ash and your iron will sound a series of beeps. This will be
repeated whilst your iron is in auto shut-off mode. To restart your iron, gently move it until
the power/auto shut-off function light stops ashing.
•
•
•

10
care and cleaning
Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior
of your iron because they will damage the surface.
Cleaning the soleplate of your Iron
After each use, allow your iron to completely cool down before wiping the soleplate with
a soft damp cloth. If polyester has burnt to the soleplate, iron a damp cotton cloth while
your iron is still hot. If necessary, allow your iron to completely cool down then wipe over
the soleplate with a soft cloth moistened with methylated spirits. Remove the methylated
spirit with a damp cloth. Make sure that the soleplate is completely dry.
Self-cleaning
Only press the self-clean button when you want to activate the self cleaning
system. Never press the self-clean button when ironing.
The self-clean function removes scale and impurities. Use the self-clean function once
every two weeks. If the water in your area is very hard, the self clean function should be
used more frequently.
Ensure your iron is switched off and unplugged from the mains supply socket.
Set the steam control to the no steam ( ) position.
Fill your iron with water to the MAX level.
Stand your iron on its heel rest, plug in and switch on at the mains supply.
Set the temperature control dial to the highest (MAX) setting. Allow your iron to heat
up until the temperature indicator light goes out.
Unplug your iron and hold it over a sink with the sole-plate facing downwards.
Press and hold the self-clean button. Hot water and steam will be ejected from the
holes in the soleplate along with any impurities.
Release the self-clean button after one minute or when the water tank is empty.
Stand your iron on its heel rest, plug it in to the mains supply socket and switch on.
When the temperature indicator light goes out, iron an old piece of cloth to allow any
remaining water to escape.
After use, switch off and unplug your iron from the mains supply and allow it to fully
cool. Empty out any remaining water.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

11
care and cleaning
Cleaning the steam holes
To remove build-up from the steam holes which may affect steam performance, use a
cotton wool tip moistened in methylated spirits. Wipe over with a damp cloth.
To clean the exterior of your iron, wipe over with a damp soft cloth and wipe dry. Ensure
the soleplate is then dried thoroughly.
Storing your iron
Set the steam control to the no steam ( ) position.
Switch the mains supply socket off and remove the plug.
When the soleplate has cooled, empty the remaining water from the tank.
Always store your iron on its heel rest. Do not store your iron resting on its soleplate,
or in the carton.
Do not wrap the cord around the soleplate. The cord can be neatly wrapped around
the heel of your iron.
•
•
•
•
•

12
This appliance must be earthed.
This appliance is tted with either a moulded or rewirable BS1363, 13 amp plug. The fuse
should be rated at 13 amps and be ASTA approved to BS1362.
If the fuse in a moulded plug needs to be changed, the fuse cover must be retted. The
appliance must not be used without the fuse cover tted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord
and an appropriate plug tted as detailed below. If you remove the plug it must not be
connected to a 13 amp socket and the plug must be disposed of immediately.
The wires of the mains lead are coloured in accordance with the following code:
GREEN/YELLOW = EARTH BLUE = NEUTRAL BROWN = LIVE
The wire which is coloured GREEN/YELLOW must be connected to the terminal in
your plug which is marked with an E or by the earth symbol ( ) or coloured GREEN or
GREEN /YELLOW.
The wire which is coloured BLUE must be connected to the terminal in your plug which is
marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in your plug which
is marked with the letter L or coloured RED.
If any other plug is used, a 13 amp fuse must be tted either in the plug or adaptor or at
the distributor board.
Plug should be BS1363 approved
Fit a 13 Amp Fuse
Ensure that the outer sheath of the cable
is rmly held by the clamp
BROWN
(Live)
13 Amp
Fuse
BLUE
(Neutral)
GREEN/YELLOW
(Earth)
connection to the mains supply

13
after sales service
These appliances are built to the very highest of standards. There are no user serviceable
parts. Follow these steps if the unit fails to operate:
Check the instructions have been followed correctly.
Check that the fuse has not blown.
Check that the mains supply is functional.
If the appliance will still not operate, return the appliance to the place it was purchased for
a replacement. To return the appliance to the Customer Service Department, follow the
steps below:
Pack it carefully (preferably in the original carton). Ensure the unit is clean.
Enclose your name and address and quote the model number on all correspondence.
Give the reason why you are returning it.
If within the guarantee period, state when and where it was purchased and include
proof of purchase (e.g. till receipt).
Send it to our Customer Service Department at the address below:
Customer Service Department
Pulse Home Products Limited
Middleton Road
Royton
Oldham
OL2 5LN, UK.
Telephone: [phone] Fax: [phone]
e-mail: [email protected]
1.
2.
3.
1.
2.
3.
4.
5.

14
This product is guaranteed for a period of 1 year from the date of purchase against
mechanical and electrical defects.
This guarantee is only valid if the appliance is used solely for domestic purposes in
accordance with the instructions provided, that it is not connected to an unsuitable
electricity supply, dismantled or interfered with in any way or damaged through misuse.
Under this guarantee we undertake to repair or replace free of charge any parts found to
be defective.
Nothing in this guarantee or the instructions relating to the product excludes, restricts or
otherwise affects your statutory rights.
In line with our policy of continuous development, we reserve the right to change this
product, packaging and documentation without notice.
guarantee

15

Vine Mill, Middleton Road, Royton, Oldham OL2 5LN, UK
www.breville.co.uk
Breville is a registered trademark of Pulse Home Products Limited
© Pulse Home Products Limited
93231-0
VIN212_Iss_1 09/10