Breville Edge VKT236 User manual

Breville Edge
Low Steam stainless steel kettle
VKT236_22EM1 (UK).indd 1VKT236_22EM1 (UK).indd 1 2022/10/28 下午3:582022/10/28 下午3:58

2 3
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
1. Filter behind the spout
2. Spout
3. Pull off lid
4. Water level window
5. On/off switch
6. 360 rotational power base with cord storage
7. Easy clean, fast boil concealed element
PRODUCT SAFETY
READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE
This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and
user maintenance shall
not be made by children
unless they are older than
8 and supervised. Keep the
appliance and its cord out of
the reach of children aged
less than 8 years.
Never use a power base other
than the one supplied with the
appliance.
Never ll the kettle above the
MAX marking. If the kettle is
overlled, boiling water may
be ejected.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service
agent or similarly qualied
persons in order to avoid a
hazard.
!This appliance generates heat during
use. Adequate precaution must be taken
to prevent the risk of burns, scalds, res
or other damage to persons or property
caused by touching the exterior whilst in
use or during cooling.
!This appliance generates heat during
use. Adequate precaution must be taken
to prevent the risk of burns, scalds, res
or other damage to persons or property
caused by touching the exterior whilst in
use or during cooling.
!Never use this appliance for anything
other than its intended use. This
appliance is for household use only. Do
not use this appliance outdoors.
!Always ensure that hands are dry before
handling the plug or switching on the
appliance.
!Always use the appliance on a stable,
secure, dry and level surface.
!This appliance must not be placed on or
near any potentially hot surfaces (such
as a gas or electric hob).
!Do not use the appliance if it has been
dropped, if there are any visible signs of
damage or if it is leaking.
!Ensure the appliance is switched off and
unplugged from the supply socket after
use and before cleaning.
!Always allow the appliance to cool
before cleaning or storing.
!Never immerse any part of the
appliance or power cord and plug in
water or any other liquid.
!Never let the power cord hang over the
edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.
!Never leave the appliance unattended
when in use.
!Beware of steam coming from the spout
or lid especially during relling. Never
open the lid during the boiling cycle.
!Never ll the appliance when it is
positioned on the power base.
!Never use the kettle without sufcient
water in the kettle for it to operate
correctly.
!Never allow the appliance to boil dry.
1
7
2
6
3
4
5
VKT236_22EM1 (UK).indd 2-3VKT236_22EM1 (UK).indd 2-3 2022/10/28 下午3:582022/10/28 下午3:58

2 3
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
1. Filter behind the spout
2. Spout
3. Pull off lid
4. Water level window
5. On/off switch
6. 360 rotational power base with cord storage
7. Easy clean, fast boil concealed element
PRODUCT SAFETY
READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE
This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and
user maintenance shall
not be made by children
unless they are older than
8 and supervised. Keep the
appliance and its cord out of
the reach of children aged
less than 8 years.
Never use a power base other
than the one supplied with the
appliance.
Never ll the kettle above the
MAX marking. If the kettle is
overlled, boiling water may
be ejected.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service
agent or similarly qualied
persons in order to avoid a
hazard.
!This appliance generates heat during
use. Adequate precaution must be taken
to prevent the risk of burns, scalds, res
or other damage to persons or property
caused by touching the exterior whilst in
use or during cooling.
!This appliance generates heat during
use. Adequate precaution must be taken
to prevent the risk of burns, scalds, res
or other damage to persons or property
caused by touching the exterior whilst in
use or during cooling.
!Never use this appliance for anything
other than its intended use. This
appliance is for household use only. Do
not use this appliance outdoors.
!Always ensure that hands are dry before
handling the plug or switching on the
appliance.
!Always use the appliance on a stable,
secure, dry and level surface.
!This appliance must not be placed on or
near any potentially hot surfaces (such
as a gas or electric hob).
!Do not use the appliance if it has been
dropped, if there are any visible signs of
damage or if it is leaking.
!Ensure the appliance is switched off and
unplugged from the supply socket after
use and before cleaning.
!Always allow the appliance to cool
before cleaning or storing.
!Never immerse any part of the
appliance or power cord and plug in
water or any other liquid.
!Never let the power cord hang over the
edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.
!Never leave the appliance unattended
when in use.
!Beware of steam coming from the spout
or lid especially during relling. Never
open the lid during the boiling cycle.
!Never ll the appliance when it is
positioned on the power base.
!Never use the kettle without sufcient
water in the kettle for it to operate
correctly.
!Never allow the appliance to boil dry.
1
7
2
6
3
4
5
VKT236_22EM1 (UK).indd 2-3VKT236_22EM1 (UK).indd 2-3 2022/10/28 下午3:582022/10/28 下午3:58

4 5
BEFORE FIRST USE
Remove any packaging and promotional material
from your kettle and position it on a stable, secure,
dry and level work surface away from the edge.
Before connecting to a power source, make sure
your mains supply voltage is the same as the one
indicated on the appliance. Connect the plug to a
suitable power outlet and make sure that the power
cord does not overhang the work surface. Excess
power cord can be stored in the power base.
Remove the kettle from the power base and open
the lid. Fill your kettle to the maximum mark and
close the lid.
Place your kettle back onto the power base. Switch
your kettle on, allow it to boil then discard the water.
Repeat twice. This will remove any residue left over
from the manufacturing process.
USING YOUR KETTLE
If this kettle is lled above the maximum level
mark, hot water may be ejected from the spout
during boiling. Beware of steam coming from
the spout or lid especially during relling. Never
open the lid when the kettle is boiling.
1. With your kettle switched off, plug the power
base into a suitable power outlet.
2. Remove your kettle from the power base before
lling it with water.
3. Fill your kettle with water. You can ll it through
the spout or by opening the lid. Don’t overll
your kettle and always ensure that there is
sufcient water in your kettle for it to operate
correctly. This is approximately 250ml or 1
teacup full. Always check the water level when
your kettle is positioned on its power base.
4. If opened previously, close the lid and then
switch your kettle on. Make sure that the lid is
correctly closed to ensure safe operation.
5. When the water reaches boiling point, your
kettle will switch off automatically.
6. You may also switch your kettle off manually at
any time by moving the switch to the off position.
Always use caution when lifting or carrying your
kettle when it is full of boiling water and when
pouring it.
ENERGY SAVING HINTS AND TIPS
A Breville®kettle, if used correctly, is a very energy
efcient device. Why not try some of these energy
saving tips:
• Only boil the water you need. Overlling your
kettle by one cup is the equivalent to using an
energy saving light bulb for one hour!
• It is not always necessary to re-boil your kettle.
For example, one litre of water will still be at
90°C after ve minutes - the perfect temperature
for a cup of coffee.
IF THE KETTLE BOILS DRY
If the kettle is operated with insufcient water a built
in fail-safe device will automatically switch it off.
• Unplug your kettle and allow it to cool. When it
has cooled down sufciently the safety device
will reset itself.
• Once the safety device has reset, rell your
kettle with cold water and use it as normal.
To ensure your kettle continues to work effectively
we recommenced descaling regularly. Scale build up
will prevent the noise reducing ring from working.
STEAM SURGE CONTROL
The Breville steam surge technology helps to stop
build up of condensation in your kitchen by reducing
the kettle steam output by up to 75%*.
When your kettle reaches temperature, it will
automatically switch off. As this technology is paired
with quiet boil we recommend using the water
window light as the indication the kettle has reached
boiling point.
QUIET BOILING
Designed to make boiling water quieter.
The stainless steel disk attached to the kettle oor
acts as a diffuser plate. It is perforated with a range
of holes which help disperse, and reduce the size
of, the water bubbles thus signicantly reducing the
noise of the boiling process.
MAINTAINING THE QUIETNESS OF YOUR
KETTLE
Regular use of the kettle can lead to the build-up of
mineral deposits which reduces the effectiveness of
the diffuser plate as well as the performance of the
kettle.
It is important to descale your kettle regularly to
prolong the life of the kettle.
Breville recommend that the kettle is descaled every
4-6 weeks.
CLEANING
Always unplug the kettle from the mains
supply socket and allow it to completely cool
down before cleaning or descaling it. Do not
immerse the kettle, power base or power cord
and plug in water or any other liquid.
1. Clean the exterior surface of the kettle with a
damp cloth and then polish with a soft dry cloth.
Do not use steel wool pads or harsh/abrasive
cleaners.
2. Descale your kettle regularly to keep it working
efciently. Use a proprietary descaling product
following the manufacturer’s instructions
carefully.
CLEANING THE FILTER
Before removing or retting the lter, switch
off the kettle and empty it. Allow it to cool
completely, then unplug the power base from the
mains supply socket. Never operate the kettle
without the lter tted.
• Open the lid and remove the lter from behind
the spout.
• Rinse the lter under a tap whilst brushing it with
a soft brush.
• In hard water areas it may be necessary to
descale the lter using a descaling product. Use
a proprietary descaling product following the
manufacturer’s instructions carefully.
• The lter may be washed safely in the cutlery
rack of a dishwasher.
• Ret the lter back into your kettle.
VKT236_22EM1 (UK).indd 4-5VKT236_22EM1 (UK).indd 4-5 2022/10/28 下午3:582022/10/28 下午3:58

4 5
BEFORE FIRST USE
Remove any packaging and promotional material
from your kettle and position it on a stable, secure,
dry and level work surface away from the edge.
Before connecting to a power source, make sure
your mains supply voltage is the same as the one
indicated on the appliance. Connect the plug to a
suitable power outlet and make sure that the power
cord does not overhang the work surface. Excess
power cord can be stored in the power base.
Remove the kettle from the power base and open
the lid. Fill your kettle to the maximum mark and
close the lid.
Place your kettle back onto the power base. Switch
your kettle on, allow it to boil then discard the water.
Repeat twice. This will remove any residue left over
from the manufacturing process.
USING YOUR KETTLE
If this kettle is lled above the maximum level
mark, hot water may be ejected from the spout
during boiling. Beware of steam coming from
the spout or lid especially during relling. Never
open the lid when the kettle is boiling.
1. With your kettle switched off, plug the power
base into a suitable power outlet.
2. Remove your kettle from the power base before
lling it with water.
3. Fill your kettle with water. You can ll it through
the spout or by opening the lid. Don’t overll
your kettle and always ensure that there is
sufcient water in your kettle for it to operate
correctly. This is approximately 250ml or 1
teacup full. Always check the water level when
your kettle is positioned on its power base.
4. If opened previously, close the lid and then
switch your kettle on. Make sure that the lid is
correctly closed to ensure safe operation.
5. When the water reaches boiling point, your
kettle will switch off automatically.
6. You may also switch your kettle off manually at
any time by moving the switch to the off position.
Always use caution when lifting or carrying your
kettle when it is full of boiling water and when
pouring it.
ENERGY SAVING HINTS AND TIPS
A Breville®kettle, if used correctly, is a very energy
efcient device. Why not try some of these energy
saving tips:
• Only boil the water you need. Overlling your
kettle by one cup is the equivalent to using an
energy saving light bulb for one hour!
• It is not always necessary to re-boil your kettle.
For example, one litre of water will still be at
90°C after ve minutes - the perfect temperature
for a cup of coffee.
IF THE KETTLE BOILS DRY
If the kettle is operated with insufcient water a built
in fail-safe device will automatically switch it off.
• Unplug your kettle and allow it to cool. When it
has cooled down sufciently the safety device
will reset itself.
• Once the safety device has reset, rell your
kettle with cold water and use it as normal.
To ensure your kettle continues to work effectively
we recommenced descaling regularly. Scale build up
will prevent the noise reducing ring from working.
STEAM SURGE CONTROL
The Breville steam surge technology helps to stop
build up of condensation in your kitchen by reducing
the kettle steam output by up to 75%*.
When your kettle reaches temperature, it will
automatically switch off. As this technology is paired
with quiet boil we recommend using the water
window light as the indication the kettle has reached
boiling point.
QUIET BOILING
Designed to make boiling water quieter.
The stainless steel disk attached to the kettle oor
acts as a diffuser plate. It is perforated with a range
of holes which help disperse, and reduce the size
of, the water bubbles thus signicantly reducing the
noise of the boiling process.
MAINTAINING THE QUIETNESS OF YOUR
KETTLE
Regular use of the kettle can lead to the build-up of
mineral deposits which reduces the effectiveness of
the diffuser plate as well as the performance of the
kettle.
It is important to descale your kettle regularly to
prolong the life of the kettle.
Breville recommend that the kettle is descaled every
4-6 weeks.
CLEANING
Always unplug the kettle from the mains
supply socket and allow it to completely cool
down before cleaning or descaling it. Do not
immerse the kettle, power base or power cord
and plug in water or any other liquid.
1. Clean the exterior surface of the kettle with a
damp cloth and then polish with a soft dry cloth.
Do not use steel wool pads or harsh/abrasive
cleaners.
2. Descale your kettle regularly to keep it working
efciently. Use a proprietary descaling product
following the manufacturer’s instructions
carefully.
CLEANING THE FILTER
Before removing or retting the lter, switch
off the kettle and empty it. Allow it to cool
completely, then unplug the power base from the
mains supply socket. Never operate the kettle
without the lter tted.
• Open the lid and remove the lter from behind
the spout.
• Rinse the lter under a tap whilst brushing it with
a soft brush.
• In hard water areas it may be necessary to
descale the lter using a descaling product. Use
a proprietary descaling product following the
manufacturer’s instructions carefully.
• The lter may be washed safely in the cutlery
rack of a dishwasher.
• Ret the lter back into your kettle.
VKT236_22EM1 (UK).indd 4-5VKT236_22EM1 (UK).indd 4-5 2022/10/28 下午3:582022/10/28 下午3:58

6 7
AFTER SALES SERVICE & REPLACEMENT
PARTS
In the case the appliance does not operate but is
under warranty, return the product to the place it was
purchased for a replacement. Please be aware that
a valid form of proof of purchase will be required.
For additional support, please contact our Consumer
Service Department at 0800 028 7154 or email:
[email protected]
TROUBLESHOOTING
For troubleshooting and FAQs visit:
www.breville.co.uk/faqs
ELECTRICAL SAFETY
This appliance must be earthed.
If the plug is not suitable for the socket outlets in
your home, it can be removed and replaced by a
plug of the correct type.
If the fuse in a moulded plug needs to be changed,
the fuse cover must be retted. The appliance must
not be used without the fuse cover tted.
If the plug fuse requires replacement, a fuse of the
same rating as that tted by the manufacturer must
be used. In order to prevent a hazard do not t a
fuse of a lower or higher rating.
If the terminals in the plug are not marked or if you
are unsure about the installation of the plug please
contact a qualied electrician.
Blue
(Neutral)
Brown
(Live)
Green/Yellow
(Earth)
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Ensure that the outer sheath of
the cable is firmly held by the cord grip
Waste Disposal
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. E-mail us at [email protected] for
further recycling and WEEE information.
VKT236_22EM1 (UK).indd 6-7VKT236_22EM1 (UK).indd 6-7 2022/10/28 下午3:582022/10/28 下午3:58