Breville TKO60 User manual

1
www.breville.com.au
Model TK060 | TK060C | TKO60S Issue 1/07
Breville is a registered trademark of Breville Pty. Ltd. ABN 98 000 092 928 Breville Customer Service Centre Australian Customers ✉Breville Customer Service Centre
PO Box 22 Botany NSW 2019 AUSTRALIA
☎Customer Service: 1300 139 798
Fax [phone] Email Customer Service: [e-mail]
New Zealand Customers ✉Breville Customer Service Centre
Private Bag 94411 Greenmount Auckland, New Zealand
☎Customer Service: 09 271 3980
Fax [phone] Email Customer Service: [e-mail]
© Copyright. Breville Pty. Ltd. 2006
Straus is a trademark of Breville Pty. Ltd.
Due to continual improvements in design or otherwise,
the product you purchase may differ slightly from the
one illustrated in this booklet.
Instructions TKO60 TKO60C TKO60S
BR8081 TKO60_Book.qxp:BR8081 TKO60_Book.qxp 1/6/07 9:47 AM Page A1

Congratulations on the purchase of your new Breville Stratus Cordfree Kettle
Contents
Page
Breville recommends safety first 4 Know your Breville Stratus Cordfree Kettle 5 Operating your Breville Stratus Cordfree Kettle 6 Care and cleaning 8
2
BR8081 TKO60_Book.qxp:BR8081 TKO60_Book.qxp 1/6/07 9:47 AM Page 2

Know your Breville Stratus Cordfree Kettle
5
Breville recommends safety first We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following instructions: Important Safeguards for your Breville Stratus Cordfree Kettle •Carefully read all instructions before operation and
save for future reference.
•Remove any packaging material and promotional
stickers before using the kettle for the first time.
•This appliance has been designed specifically for
the purpose of boiling drinking quality water only.
•Do not place the kettle near the edge of a bench or
table during operation. Ensure that the surface is level, clean and free of water.
•Do not let the cord hand over the edge of a table or
counter, touch hot surfaces or become knotted. Fully unwind the cord before use.
•Keep the kettle clear of walls, curtains and other
heat or steam sensitive materials. Minimum 200mm distance.
•Do not place on or near a hot gas burner, electric
element, or in or near a heated oven.
•To protect against electric shock, do not immerse
the kettle base, switch area, power base, power supply cord or plug in water or allow moisture to come in contact with these parts.
•Do not remove the kettle from the power base
during operation. Ensure the kettle has switched to ‘OFF’ position, after the water has boiled, before removing the kettle from the power base.
•Do not touch hot surfaces. Use the handle for lifting
and carrying the kettle.
•Keep the appliance clean. Refer to care and
cleaning (Page 8).
•This appliance is not intended for use by young
children or infirm persons unless they have been adequately supervised by a responsible person to ensure they can use the appliance safely.
•Young children should be supervised to ensure that
they do not play with the appliance.
•It is recommended to regularly inspect the
appliance. Do not use the appliance if the power supply cord, plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorized Breville Service Centre for examination and/or repair.
•Any maintenance other than cleaning should be
performed at an authorized Breville Service Centre.
•This appliance is for household use only. Do not
use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors.
•The installation of a residual current device (safety
switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See
your electrician for professional advice.
4
THIS KETTLE SHOULD BE USED WITH A RESIDUAL CURRENT DEVICE (SAFETY SWITCH) TO
LESSEN THE RISK OF SCALDING OR OTHER INJURY FROM HOT WATER THAT MAY BE
EJECTED IF THE HEATING ELEMENT ERUPTS. DISREGARD THIS POINT IF YOUR HOME IS FITTED WITH A RESIDUAL CURRENT DEVICE (SAFETY SWITCH). DO NOT OPERATE THE KETTLE ON AN INCLINED SURFACE.
DO NOT MOVE KETTLE WHEN IT IS SWITCHED ON.
Removable filter Safety locking hinged lid Power ‘On/Off’ switch Safety auto cut off and boil dry protection Dual water windows 1.7 litre capacity Power ‘On’ light 2400 Watt concealed element Multi-directional cordfree power base with cord storage
Lid release button
Safety locking hinged lid Locks firmly in place for added safety and opens at the touch of a button for easy cleaning and filling.
BR8081 TKO60_Book.qxp:BR8081 TKO60_Book.qxp 1/6/07 9:47 AM Page 4

7
The kettle will automatically switch ‘OFF’ once the water has boiled. Lift the kettle from the power base and pour the water. Take care to hold the kettle level, especially when filled to the maximum level. To re- boil it may be necessary to wait for a few seconds to allow the control to reset. The kettle should be stored on its power base when not in use. The power outlet should be switched off and the power cord unplugged from the power outlet
when not in use.
This kettle must only be used with the power base supplied. Use caution when pouring water from your kettle, as boiling water will scald. Do not pour the water too quickly.
Note
Safety boil dry protection The kettle is fitted with a safety device, which protects against overheating should the appliance be operated with insufficient water. If this occurs the
kettle will stop heating. Switch ‘OFF’ at the power outlet and allow kettle to cool before refilling. The
safety device will automatically reset when the kettle has cooled down. For additional safety your kettle is fitted with an additional thermal cut out. In the event of overheating, the kettle will automatically shut down to prevent further damage. Should this occur, take your kettle to an authorised Breville Service Centre.
Before first use Remove any packaging material and promotional stickers before using your kettle for the first time. It is recommended before first use to fill the kettle to the maximum level with cold tap water, switch on and bring to the boil and then discard the water. Your kettle will only operate when positioned on the power base with the ON/OFF switch in the ‘ON’ position. The kettle will automatically switch off once the water has boiled. Operation of your kettle 1. To fill the kettle with water, remove it from the
power base and open the lid by pushing the lid release button (the lid will automatically open). Fill with the desired amount of water. Always fill the kettle between the minimum and maximum marks on the water window. Too little water will result in the kettle switching off.
2. Ensure that the lid is closed and locked firmly
into place. Place the kettle firmly onto the power base. Plug the power cord into 230/240V power outlet and switch ‘ON’
3. Press the ON/OFF switch down to the ‘ON’
position. The power ‘ON’ light will illuminate
Do not remove the kettle from the power base
during operation. Ensure the kettle has been switched to ‘OFF’ position after the water has boiled, before removing the kettle from the power base.
Note
Always fill the kettle between the minimum 0.5 and the maximum 1.7 marks on the water
window of the kettle. Too little water will result in the kettle switching OFF. Filling above the maximum mark may result in boiling water splashing from the kettle.
Note
Operating your Breville Stratus Cordfree Kettle
6
THIS APPLIANCE IS DESIGNED FOR THE BOILING OF DRINKING QUALITY WATER ONLY.
NEVER USE IT TO HEAT OR BOIL ANY OTHER LIQUIDS OF FOODSTUFFS. THE LID SHOULD
ALWAYS BE FIRMLY IN PLACE AND LOCKED INTO THE CLOSED POSITION BEFORE USE.
BR8081 TKO60_Book.qxp:BR8081 TKO60_Book.qxp 1/6/07 9:47 AM Page 6

Notes
9
Care and cleaning Always switch of at the power outlet, and then unplug the appliance from the power outlet before cleaning. Removable filter The Stratus Cordfree Kettle features a removable mesh filter to remove scale deposits for cleaner water. To clean the scale deposits remove the filter by opening the lid and sliding the filter up and out of the slot behind the spout of the kettle. The filter can be cleaned by running under hot water and rubbing with a cleaning cloth or brush. To replace filter, simply slide the filter down into the slot behind the spout of the kettle. Removal of mineral deposits Mineral deposits in tap water may cause the kettle interior and water windows to discolour over time. This may be removed by using a proprietary kettle descaler which is available from most leading supermarkets, department stores and hardware stores. Alternatively: 1. Fill the kettle until 2/3full with 1 part vinegar and
2 parts water. Boil and allow to stand overnight.
2. Empty the solution from the kettle. Fill the kettle
with clean water, bring to boil and discard the water. Repeat and the kettle will be ready for use.
To clean the exterior The outside of the kettle may be wiped over with a damp cloth and polished with a soft dry cloth.
Do not use chemicals, steel wool, or abrasive cleaners to clean the inside or outside of the kettle.
Note
8
NEVER IMMERSE THE KETTLE BASE, SWITCH AREA, POWERBASE OR POWER SUPPLY
CORD IN WATER, OR ALLOW MOISTURE TO COME INTO CONTACT WITH THESE PARTS.
BR8081 TKO60_Book.qxp:BR8081 TKO60_Book.qxp 1/6/07 9:47 AM Page 8

Notes
11
Notes
10
BR8081 TKO60_Book.qxp:BR8081 TKO60_Book.qxp 1/6/07 9:47 AM Page 10