Breville VTT502 User manual

stainless steel
4 slice toaster

2
Product safety
Please read these instructions before operating the appliance and
retain them for future use.
This product can be used by children aged 8 years
and above, and persons who require supervision,
provided:
• they are familiar with the hazards associated with
the product, and,
• they receive instruction by a competent person on
how to safely use the product.
Children must not play with the product. Cleaning
and user maintenance must not be done by children
unless they are supervised.
Keep the appliance and its cord out of reach of
children less than 8 years old.
Bread can burn therefore do not use the appliance
near or below combustible materials such as curtains.
Never use the appliance below wall cupboards or
shelves.
Never operate the appliance by means of an external
timer or separate remote-control system.
Do not touch the metal parts of the appliance during
use as they may become very hot.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
!Never use this appliance for anything other than its intended use. This appliance is
for household use only. Do not use this appliance outdoors.
!Always ensure that hands are dry before handling the plug or switching on the
appliance.
!Always use the appliance on a stable, secure, dry and level surface.
!This appliance must not be placed on or near any potentially hot surfaces (such as
a gas or electric hob).
!Do not use the appliance if it has been dropped or if there are any visible signs of
damage.
!Ensure the appliance is switched off and unplugged from the supply socket after use
and before cleaning.
!Always allow the appliance to cool before cleaning or storing.
!Never immerse any part of the appliance or power cord and plug in water or any
other liquid.
!Never let the power cord hang over the edge of a work top, touch hot surfaces or
become knotted, trapped or pinched.
!Never leave the appliance unattended when in use.
!Before connecting to a power source, make sure your mains supply voltage is the
same as the one indicated on the appliance.

3
!Never force bread into the toasting slots.
!Never toast slices of bread that have been buttered.
!Never use your toaster with any food item that contains sugar, or any product that
contains jam or preserves.
!Don’t use bent, damaged or broken bread in your toaster.
1 Bread slots
2 Cancel button
3 Reheat button
4 Loading handle with high lift feature and lift-and-look
5 Frozen bread button
6 Browning control
7 Crumb tray (x2 at the rear of the toaster)
Before using for the rst time
Carefully remove your toaster from its box. Remove all packaging from inside the
toasting slots.
Position your toaster on a stable, secure, dry and level work surface away from the
edge. Connect the plug to a suitable power outlet and make sure that the power cord
does not overhang the work surface.
When you rst use your toaster, there may be a slight odour as the heating elements
warm up for the rst time. This is normal and not a cause for concern. To remove the
odour, simply operate your toaster for the rst time without any bread in it.

4
Controls
BROWNING CONTROL
The browning control y regulates how much the bread is toasted—in other words,
the colour of the toast. Lower settings produce lighter toast and higher settings produce
darker toast.
When setting the browning control, remember that dry or thin slices of bread will toast
quicker and require a lower setting. Moist or thick slices of bread will require a higher
setting.
CANCEL BUTTON
The toasting process can be stopped at any time by pressing the cancel button w.
HIGH LIFT FEATURE
The high lift feature uses the loading handle r to help you to remove the toast. When
toasting has nished, simply lift the loading handle upwards from its rest position to
raise the toast and make it easier to remove.
LIFT-AND-LOOK FEATURE
The lift-and-look feature allows you to check the progress of the toast without cancelling
the toasting process. Lift the loading handle r up at any time during toasting and
lower it again to resume toasting. If the toast is cooked, press the cancel button to stop
further toasting.
FROZEN BREAD FUNCTION
The frozen bread function allows you to toast bread straight from the freezer. Insert the
bread into your toaster, press the loading handle down and then press the frozen bread
button t. Your toaster will extend the toasting time to allow the bread time to defrost.
Watch the toast to ensure that it doesn’t burn.
REHEAT FUNCTION
The reheat function will heat up toast that has cooled or gone cold. Press the loading
handle down then press the reheat button e. Watch the toast to ensure that it doesn’t
burn. Don’t use the reheat function on buttered toast.
Using Your Toaster
1. Set the level of toasting using the browning control y. The higher the number
selected, the darker the toast will be.
2. Place the bread into the toasting slots. Press the loading handle r down until
it latches. The bread will be lowered into the toaster and toasting will begin.The
loading handle will not latch if your toaster is not connected to the mains
supply.
3. Don’t forget, you can use the lift-and-look feature during toasting to check your
toast. Simply lift the loading handle r up to examine your toast and lower it
again to resume toasting. If you nd your toast is cooked to your preference,
press the cancel button to stop further toasting.
4. When toasting has nished, the loading handle will rise and the toasted bread can
be removed. You can lift the loading handle upwards beyond its rest position to
help you remove the toast.

5
5. If the toast is not done enough it can be toasted again. Turn the browning control
to a lower setting and watch the toast to ensure that it doesn’t burn.
6. Toasting can be stopped at any time by pressing the cancel button w.
If you are toasting a single slice of bread, set the browning control to a lower setting
than normal. By using a lower setting when toasting a single slice of bread, it will not be
over toasted.
If Your Toaster Jams
Never use a knife or any other utensil or implement to remove jammed bread. Never
insert your ngers into the bread slots.
1. Unplug the toaster from the mains supply socket.
2. Allow the toaster to completely cool down.
3. Carefully ease the bread out of the toaster being careful not to damage the
heating element.
Cleaning
Clean the outside of your toaster with a damp cloth then dry thoroughly. Never use
harsh, abrasive or caustic cleaners.
Crumb Removal
It is important that crumbs are not allowed to build up inside your toaster. Excess
crumbs are unhygienic and could catch re.
Crumbs can be removed by sliding the crumb trays out from the bottom of your toaster.
You can then tip the crumbs out. Always make sure that your toaster has completely
cooled down and is disconnected from the mains supply before removing crumbs.
Never use your toaster without the crumb trays tted—always replace the crumb trays
before using your toaster.
Replacement parts
For additional or replacement parts, please visit www.breville.co.uk or call us on
0161 621 6900.
Troubleshooting
For troubleshooting and FAQs visit www.breville.co.uk/faqs

6
Plug should be BS1363 approved
Ensure that the outer sheath of the cable is rmly held by the clamp
BROWN (Live)
13 Amp Fuse
BLUE
(Neutral)
GREEN/YELLOW
(Earth)
Creative Kitchen
Visit Creative Kitchen for access to the best cooking techniques, mouth-watering meals,
entertaining ideas and videos to help take you from part-time cook to expert chef in
minutes. Enjoy getting creative with your home cooking at:
www.brevillecreativekitchen.co.uk.
After sales service
To return a faulty appliance to our Customer Service Department:
1. Pack it carefully (preferably in the original carton). Ensure the unit is clean.
2. Enclose your name and address and quote the model number (located on the
rating label) on all correspondence. Give the reason why you are returning it.
3. If within the guarantee period, state when and where it was purchased and include
proof of purchase (e.g. till receipt).
4. Send it to our Customer Service Department at the address below:
Customer Service Department
Jarden Consumer Solutions (Europe) Limited
5400 Lakeside, Cheadle Royal Business Park,
Cheadle, SK8 3GQ
Telephone: [phone] Fax: [phone]
e-mail: [email protected]
Electrical safety
This appliance must be earthed.
This appliance is tted with either a moulded or rewirable BS1363, 13 amp plug. The
fuse must be ASTA approved to BS1362. If the fuse in a moulded plug needs to be
changed, the fuse cover must be retted. The appliance must not be used without the
fuse cover tted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord
and an appropriate plug tted as detailed below. If you remove the plug it must not be
connected to a 13 amp socket and the plug must be disposed of immediately.
If any other plug is used, a 13 amp fuse must be tted either in the plug or adaptor or at
the distributor board.