Brica 65001 User manual

User Manual
65001
car seat
travel tote
Keep these instructions for
future reference as they
contain important information.
Adult assembly required.
Accessories not included.

21
Loading Car Seat Travel Tote
1. Unzip Car Seat Travel Tote.
2. Place child safety seat in most compact, upright
position before placing inside the Car Seat
Travel Tote.
3. Load empty child safety seat into Car Seat Travel
Tote as shown so that back of child safety seat
faces zipper. Fig. A
4. Zip to close.
Instructions
Backpack Luggage Mode
1. Remove both shoulder straps from side pocket.
*
2. Install the straps by attaching both strap end
clips to D-rings located at top of Car Seat
Travel Tote. Fig. C
3. Attach two remaining clips at other end of
straps to the single D-ring located at bottom
of Car Seat Travel Tote.
4. Place arms through straps and lift Car Seat
Travel Tote onto back. Fig. D
Note: Before checking luggage, close zipper
to prevent accidental opening during transport
and remove backpack straps and place in
pocket. Make sure pocket is secure.
*Car Seat Travel Tote is pre-assembled in backpack
luggage mode. This step is only necessary if you have
removed the shoulder straps for transport.
Wheeled Luggage Mode
1. If converting from backpack luggage mode, remove
shoulder straps and store in side pocket.
2. Pull in direction shown. Fig. B
Note: The Car Seat Travel Tote is designed to hold a
child safety seat only. Do not place any items, other
than a child safety seat into Care Seat Travel Tote.
Care: Wipe all parts with a clean cloth dampened with a mild soap and water
solution. Air dry. Do not use bleach. Do not submerge in water.
Fig. A
Fig. B Fig. D
To prevent injury, do not allow child to sit on this product
while child car seat is enclosed and pulled in luggage mode.
Fig. C

making together better™
Questions?
1.866.869.8257
bricababy.com
©2010 BRICA, Inc. 500 West 5th Street,
Suite 220, Charlotte, NC 28202
Retain this address for future reference.
Printed in China