GOGO KIDZ QRKIDZ User manual

EXPRESS LIMITED WARRANTY
Go-Go Babyz Corporation (“Go-Go Babyz”) warrants this product to be free from defects in
materials and workmanship for a period of one year from the date of purchase.Go-Go Babyz
will repair or replace, at its sole option, the defective product within that one-year time period.
This express limited warranty does not cover:
(1) Pick-up, delivery, or freight charges.
(2) Corrosion caused by improper storage or failure to reasonably protect the product from salt
water and adverse conditions.
(3) Deterioration due to lack of maintenance and cleaning as specified in the product instructions.
Go-Go Babyz SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING FROM BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT. ANY IMPLIED WARRANTY,
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, IS LIMITED TO THE DURATION OF
THE EXPRESS, LIMITED WARRANTY (ONE-YEAR FROM THE DATE OF PURCHASE).
Under no circumstance shall any liability of Go-Go Babyz under this Express
Limited Warranty, or otherwise, exceed the price of the defective product or parts.
Note: Some States do not allow the exclusion or limitation on incidental or consequential
damages, so the above limitation may not apply to you. Some states do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply to you.This
Express Limited Warranty gives you specific legal rights, and you may have other rights, which
vary from State to State.
CONTACT GO-GO BABYZ CUSTOMER SERVICE FOR INFORMATION AND
ALL RETURNS:
Go-Go Babyz Returns
3530 Charter Park Drive
San Jose, CA 95136
408.360.0653
GOGO KIDZ®
TRAVELMATE®
INSTRUCTIONS FOR USE
www.gogobabyz.com
MODEL QRKIDZ
®

0201
SAFETY
Read these instructions carefully before use and keep them for future reference.
Your child’s safety may be affected if you do not follow these instructions.
!WARNING:
!WARNING:
!WARNING:
!WARNING:
We wish you many happy travels with your gogo Kidz Travelmate! If you have a problem with your
Go-Go Babyz product, please contact customer service for all warranty information. You many also
visit our web site: www.gogobabyz.com. We offer helpful information regarding assembly and use
of the gogo Kidz Travelmate®. You may also view helfpful instruction videos from our site or visit
www.youtube.com/user/GoGoBabyz
Go-Go Babyz Corporation
3530 Charter Park Drive San Jose, CA 95136 USA
408-360-0653 / [email protected]
www.gogobabyz.com
CONTENTS
PARTS ............................................3
AXLE & WHEELS ASSEMBLY .....................4
HANDLE ASSEMBLY. .............................4
ATTACHING TO YOUR CAR SEAT ................5
QUICK RELEASE STRAP ........................6
USING THE RATCHET
RELEASING THE STRAP
ADJUSTING THE STRAP LENGTH
ADJUSTING THE STRAP HEIGHT
!WARNING:
AVOID SERIOUS INJURY FROM FALLING OR SLIDING
OUT. ALWAYS USE CAR SEAT MANUFACTURERS HARNESS
TO RESTRAIN CHILD WHEN IN USE.
NEVER LEAVE CHILD UNATTENDED.
INTENDED FOR CHILDREN 3 MONTHS OR OLDER AND UP TO A
MAXIMUM OF 20 KG (44 POUNDS).
DO NOT LEAVE THE GOGO KIDZ TRAVELMATE® ATTACHED TO
A CAR SEAT WHILE DRIVING IN AN AUTOMOBILE OR ON THE
AIRPLANE.
NEVER USE THE GOGO KIDZ TRAVELMATE® ON STAIRWAYS OR
ESCALATORS.
ANY LOAD OTHER THAN THE GO-GO BABYZ HANDLE POUCH
AFFECTS THE STABILITY OF GOGO KIDZ TRAVELMATE®.
THIS PRODUCT IS NOT SUITABLE FOR RUNNING OR SKATING,
!WARNING:
!WARNING:

B.
D.
E.
A.
C.
PARTS
03
AXLE & WHEELS ASSEMBLY
A. Handle (1)
B. Handle Screws (2)
C. Plate (1) with Quick Release Strap Attached
D. Axle (1)
E. Wheels (2) with Quick Release Spring Locks (2)
Ladder
Strap
Buckle /
Ratchet
Strap
Front of plate
Adjusting
Clip
Metal Brackets &
Binding Posts
#1
#2
#3
# 4
# 6
HANDLE ASSEMBLY
# 5
Holes in Handle
face the front
of the Plate.
Holes are guides
for the Handle
Screws and may not
align 100%.
Wheels should“click”on to axle to secure. Pull on wheels
to test connection prior to use.
04
Spring Lock

Metal
Brackets
Adjusting
Clip
g
A
d
j
u
s
t
i
n
C
li
p
0605
ATTACHING TO YOUR CAR SEAT
Slide Car Seat On
Tighten
Strap With
Ratchet
QUICK RELEASE STRAP
The Quick Release Strap is pre-assembled onto the Plate of the gogo Kidz Travelmate for use with most
car seats. You may need to make adjustments in the length of the strap for proper tension or the height
of the strap on the Plate to align with car seat belt opening.
TO LENGTHEN OR SHORTEN
THE STRAP:Slide the adjusting clip.
TO ADJUST THE STRAP HEIGHT:
Remove the metal brackets and binding
posts that attach the strap to the Plate
with a screwdriver. Reposition the bracket
in holes on the sides of the Plate. Make
sure you position both metal brackets in
same hole on each side (ex: left side is
fourth hole from the bottom and right side
is fourth hole from the bottom).
TIGHTEN RELEASE
#1
#2 #3
Feed Strap
Through
Opening
Recline the car seat for ease of feeding the strap and best child comfort.
The Tabs on the
Plate support the
car seats. Place
tabs under all car
seat bases; EXCEPT
OLDER Britax car seats.
The Tabs go below
the Ribs on the back
of the 2009 and older
Britax seats, not the
Base.