MODEL # BL-EXT300-FBR - Operating Instructions
Receiver Panel
①Power input ②Power input indicator
③Indicator of status ④Fiber input
⑤HDMI output
Connecting and Operating
1. Assemble modules with single /multi mode, single /duplex fiber to the HDMI
Extender①.
2. Connect the HDMI input source to input port of the HDMI Transmitter.
3. Connect the duplex fiber optic or Bi-directional single fiber cable to HDMI
transmitter and receiver to read the EDID from HDMI Display (Optional).
4. Connect LC-LC single /multi mode single /duplex fiber optic cable between the
Fiber port of transmitter and Fiber port of receiver.
5. Connect HDMI display to the HDMI Receiver.
6. Connect the included 5V DC power supplies to the locking power receptacle.
7. Power up the HDMI Extender, sources and displays.
Attention: Insert/Extract cable gently
①
4Kx2K requires 10G module.
Typical Application
4
MODEL # BL-EXT300-FBR - Operating Instructions
Related Optional Accessories (not included in the package)
1). BL-SFP02，2KM 10G SFP module, Single Fiber, Single Mode.
2). BL-SFP20, 10Km-20KM 10G SFP module for Transmitter, Single Fiber,
Single Mode.
3). BL-M01, Multi mode, Duplex Fiber Cable, 3ft, for EDID setting.
4). BL-S01, Single Mode, Single Fiber cable, 3ft, for EDID setting.
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine
to clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service
personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in
performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing to authorized
servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses
parts specified by the manufacturer or parts that have the same characteristics
as the hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety
checks to confirm that the unit is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or
workmanship, our Company (referred to as "the warrantor" ) will, for the length of
the period indicated as below, (Parts(2)Year, Labor(90) Days) which starts with
the date of original purchase ("Limited Warranty period"), at its option either(a)
repair your product with new or refurbished parts, or (b) replace it with a new of a
refurbished product. The decision to repair or replace will be made by the
warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must
mail-in your product during the warranty period. This Limited Warranty is
extended only to the original purchaser and only covers product purchased as
new. Apurchase receipt or other proof of original purchase date is required for
Limited Warranty service.
5
