Synergistic Research UEF ACOUSTIC DOTS User manual

• Place (1) Dot at center of front wall.
• Place (2) Dots at left side of front wall, (1) at 4-5 ft. above floor and (1) at 5-6 ft.
• Place (2) Dots at left side of front wall, (1) at 4-5 ft. above floor and (1) at 5-6 ft.
• Place (1) Dot on center of ceiling, halfway between speakers and listening position.
• Place (1) Dot low and center of front wall.
• Place (1) Dot at center of left-side wall, mid-height and halfway between speakers and
listening position.
• Place (1) Dot at center of right-side wall, mid-height and halfway between speakers
and listening position.
Center Low
• Place (1) Dot on center of back wall, centered and 6 ft. or higher above floor.
Left Side Wall, Mid-Height
1/2 Way Between Speakers
and Listening Position
UEF
Level One Level Two
Level Two Level Two
UEF ACOUSTIC DOTS
PLACEMENT GUIDE
PLACEMENT: For temporary placement and testing, clean wall thoroughly with alcohol or a household degreaser. Attach a small
amount of the included “white tac” to the back (label side) of the UEF Acoustic Dot. Follow the included guide for mounting
placement. Once the nal position has been decided, you can use the “white tac” as the nal mounting material or for a more
permanent placement, remove the lm from the back of the UEF Acoustic Dot and place on wall.
CAUTION: Placement with adhesive back overtime may become permanent and cause damage to mounting surface when removed.
CLEANING: Do not use liquid cleaners or damage may occur. We recommend using pressurized air, so bristled paint brush or a
feather duster

• Place (1) Dot at center-high on front wall.
• Place (1) Dot high above left side Dot.
• Place (1) Dot high above right side Dot.
• Place (1) Dot within the center of ceiling, halfway between speakers and first Dot.
• Place (1) Dot mid-height on right wall, slightly in front of speaker plane. • Place (1) Dot mid-height on left wall, slightly in front of speaker plane.
• Place (1) Dot high on left side of back wall.
• Place (1) Dot high on right side of back wall.
• Place (1) Dot mid-height on back wall, one foot in from right wall.
• Place (1) Dot mid-height on back wall, one foot in from left wall.
Level Four
Level Five
Level Five Level Five
Level Five
Level Four
• Place (1) Dot behind left speaker.
• Place (1) Dot behind right speaker.
• Place (1) Dot on left-side wall, mid-height and slightly behind listening position.
• Place (1) Dot on right-side wall, mid-height and slightly behind listening position.
• Place (1) Dot low and center of back wall.
Back Wall
Center Low
Level Three Level Three