Brino BCS 24-70 User manual

a. Rotate lens upwards, then place the IR lter horizontally. b. Screw in IR lter
with ngers. c. Insert the screwdriver* from TLC200 Pro into one of the driving
holes, turn clockwise until tight.
* For more information, please refer to the TLC200 Pro manual page 5(Package Content).
a. Turn TLC200 Pro face down to the oor to protect against dust getting on
the sensor. b. Rotate counter-clockwise to unlock the BCS 019.
Store with the
lens covers to
protect the lens.
Glass
Driving Holes
IR Filter
Top cover
Bottom cover Aperture
Focus
Zoom
BCS 24-70
User Manual
24-70mm F1.4
Brinno Lens
1. Package contents
Brinno Lens 24-70 mm F1.4 (BCS 24-70) x 1
Lens Bag x 1
IR Filter x 1
IR Filter case x 1
User manual x 1
2. Parts of device
Brinno Lens
3. Installation
3-2 To install IR Filter on TLC200 Pro
3-1 To remove the current lens kit(BCS 019) from TLC200 Pro
IR Filter works with BCS 019, BCS 18-55 and BCS 24-70. It’s recommended to
keep IR Filter on TLC200 Pro.
a.
a. b.
b. c.
5

Avoid to storing the lens in
high-temperature, high-humidity
locations.
Remove the bottom lens cover and turn the BCS 24-70 clockwise to
install the lens on the TLC 200 Pro.
Be careful when using dierent lens, the TLC200 Pro may tip
over due to the gravity center shift especially without battries.
DUST FINGERPRINT
MODEL
MOUNT TYPE
FOCAL LENGTH
APERTURE
ANGLE OF VIEW
FOCUS DISTANCE
SIZE
WEIGHT
BCS 24-70
CS-mount
24-70 mm
F1.4 ~ 2.4
94 ~ 38˚
Tele 1cm ~ ∞
Wide 10cm ~ ∞
Ø32x40 mm
61 g
To Insure Long Term Use
5. Specication
4. Focus Adjustment
For more information, please refer to TLC200 Pro manual page16 .
Go to the “Focus”menu( Time Lapse Camera TLC200 Pro ), see the
enlarge preview screen. Rotate the lens to focus object.
7F, No.75, Zhou Zi St., Taipei City 11493, Taiwan
Phone:[phone] Fax:[phone]
[email protected]
Thank you for purchasing Brinno Time Lapse Camera Accessories!
If you have any questions or problems setting up your Brinno TimeLapse Camera
please contact the sales sta where you purchased our product or email us at
Brinno Incorporated directly:
[email protected]
3. Installation
3-3 To install Brinno Lens (BCS 24-70) on TLC200 Pro
Focus
OK
Adjust the lens focus
FOCUS
Aperture
ZOOM
Manully set up
Tighten the screw,
after setting.
301-0065-00 (EN A1)