Brionvega rr231 totem User manual

rr226-fo-st radiofonografo
UNPACKING AND PACKING INSTRUCTIONS
Keep the original packaging in case of need.
UNPACKING
This document explains how to properly unpack the BRIONVEGA rr226-fo-st radiofonografo. Please read All
Instructions and Warnings Before Unpacking.
CAUTION!
For warranty reasons, do not throw
away the packaging materials. TWO
people are needed to unpack the
radio. Do not attempt to do it alone.
Cut the plastic straps that secure
the packaging to the plastic pallet.
Lift the cover and remove the
accessory box.
Remove the cardboard from the
compartment opposite the one
where the center piece of the
radiofonografo is housed and then
remove the packaging from the
top. Do not attempt to remove the
unit from the pallet without the
assistance of another person.
Remove the cover of the record
player and the two padding on the
right/left by sliding them sideways.
Remove the upper crosspiece. Take
particular care in extracting the right
padding and the upper crosspiece
as they are adjacent to the arm of
the record player.
Remove the center piece of the
radiofonografo from its lower
housing by lifting it simultaneously
from both sides. This operation
must be carried out by TWO people
to avoid damage to the cabinet.
Remove the nylon cover.
Remove the adhesive tape from the
packaging containing the speakers.
Then remove the padding from
the upper compartment of the
cardboard.
Page 1
rr226-fo-st radiofonografo
BRIONVEGA
a division of
SIM2 BV INTERNATIONAL SRL
Via Udine 59
33061 Rivignano Teor (UD)
Italy
Tel. [phone]
[email protected]
www.brionvega.it
cod. 461264000
WARNING!
Product must be transported using the appropriate protective packaging.
Keep the original packaging in case of need.
Incorrect packaging may result in damages to the internal parts of the product.
SIM2 BV International assumes no liability whatsoever for failure to comply with the aforementioned
instructions and warnings.
rr231 totem
rr226-fo-st radiofonografo
UNPACKING AND PACKING INSTRUCTIONS
Keep the original packaging in case of need.
UNPACKING
This document explains how to properly unpack the BRIONVEGA rr226-fo-st radiofonografo. Please read All
Instructions and Warnings Before Unpacking.
CAUTION!
For warranty reasons, do not throw
away the packaging materials. TWO
people are needed to unpack the
radio. Do not attempt to do it alone.
Cut the plastic straps that secure
the packaging to the plastic pallet.
Lift the cover and remove the
accessory box.
Remove the cardboard from the
compartment opposite the one
where the center piece of the
radiofonografo is housed and then
remove the packaging from the
top. Do not attempt to remove the
unit from the pallet without the
assistance of another person.
Remove the cover of the record
player and the two padding on the
right/left by sliding them sideways.
Remove the upper crosspiece. Take
particular care in extracting the right
padding and the upper crosspiece
as they are adjacent to the arm of
the record player.
Remove the center piece of the
radiofonografo from its lower
housing by lifting it simultaneously
from both sides. This operation
must be carried out by TWO people
to avoid damage to the cabinet.
Remove the nylon cover.
Remove the adhesive tape from the
packaging containing the speakers.
Then remove the padding from
the upper compartment of the
cardboard.
Page 1
rr226-fo-st radiofonografo
BRIONVEGA
a division of
SIM2 BV INTERNATIONAL SRL
Via Udine 59
33061 Rivignano Teor (UD)
Italy
Tel. [phone]
[email protected]
www.brionvega.it
cod. 461264000
WARNING!
Product must be transported using the appropriate protective packaging.
Keep the original packaging in case of need.
Incorrect packaging may result in damages to the internal parts of the product.
SIM2 BV International assumes no liability whatsoever for failure to comply with the aforementioned
instructions and warnings.
BV2 srl
The BRIONVEGA ART Products - Milano
Operation Ofce:
Via Udine, 59 33061 Rivignano Teor - Italy
Tel. [phone]
[email protected]
www.brionvega.it
rr226-fo-st radiofonografo
UNPACKING AND PACKING INSTRUCTIONS
Keep the original packaging in case of need.
UNPACKING
This document explains how to properly unpack the BRIONVEGA rr226-fo-st radiofonografo. Please read All
Instructions and Warnings Before Unpacking.
CAUTION!
For warranty reasons, do not throw
away the packaging materials. TWO
people are needed to unpack the
radio. Do not attempt to do it alone.
Cut the plastic straps that secure
the packaging to the plastic pallet.
Lift the cover and remove the
accessory box.
Remove the cardboard from the
compartment opposite the one
where the center piece of the
radiofonografo is housed and then
remove the packaging from the
top. Do not attempt to remove the
unit from the pallet without the
assistance of another person.
Remove the cover of the record
player and the two padding on the
right/left by sliding them sideways.
Remove the upper crosspiece. Take
particular care in extracting the right
padding and the upper crosspiece
as they are adjacent to the arm of
the record player.
Remove the center piece of the
radiofonografo from its lower
housing by lifting it simultaneously
from both sides. This operation
must be carried out by TWO people
to avoid damage to the cabinet.
Remove the nylon cover.
Remove the adhesive tape from the
packaging containing the speakers.
Then remove the padding from
the upper compartment of the
cardboard.
Page 1
rr226-fo-st radiofonografo
BRIONVEGA
a division of
SIM2 BV INTERNATIONAL SRL
Via Udine 59
33061 Rivignano Teor (UD)
Italy
Tel. [phone]
[email protected]
www.brionvega.it
cod. 461264000
WARNING!
Product must be transported using the appropriate protective packaging.
Keep the original packaging in case of need.
Incorrect packaging may result in damages to the internal parts of the product.
SIM2 BV International assumes no liability whatsoever for failure to comply with the aforementioned
instructions and warnings.
BV2 srl assumes no liability whatsoever for failure to comply with the aforementioned instructions and
warnings.
Product must be transported using the appropriate protective packaging.
Keep the original packaging in case of need.
Incorrect packaging may result in damages to the internal parts of the product.
Packaging and unpacking operations must be carried out by TWO people to avoid damage
to the cabinet.

rr226-fo-st radiofonografo
UNPACKING AND PACKING INSTRUCTIONS
Keep the original packaging in case of need.
UNPACKING
This document explains how to properly unpack the BRIONVEGA rr226-fo-st radiofonografo. Please read All
Instructions and Warnings Before Unpacking.
CAUTION!
For warranty reasons, do not throw
away the packaging materials. TWO
people are needed to unpack the
radio. Do not attempt to do it alone.
Cut the plastic straps that secure
the packaging to the plastic pallet.
Lift the cover and remove the
accessory box.
Remove the cardboard from the
compartment opposite the one
where the center piece of the
radiofonografo is housed and then
remove the packaging from the
top. Do not attempt to remove the
unit from the pallet without the
assistance of another person.
Remove the cover of the record
player and the two padding on the
right/left by sliding them sideways.
Remove the upper crosspiece. Take
particular care in extracting the right
padding and the upper crosspiece
as they are adjacent to the arm of
the record player.
Remove the center piece of the
radiofonografo from its lower
housing by lifting it simultaneously
from both sides. This operation
must be carried out by TWO people
to avoid damage to the cabinet.
Remove the nylon cover.
Remove the adhesive tape from the
packaging containing the speakers.
Then remove the padding from
the upper compartment of the
cardboard.
Page 1
rr226-fo-st radiofonografo
BRIONVEGA
a division of
SIM2 BV INTERNATIONAL SRL
Via Udine 59
33061 Rivignano Teor (UD)
Italy
Tel. [phone]
[email protected]
www.brionvega.it
cod. 461264000
WARNING!
Product must be transported using the appropriate protective packaging.
Keep the original packaging in case of need.
Incorrect packaging may result in damages to the internal parts of the product.
SIM2 BV International assumes no liability whatsoever for failure to comply with the aforementioned
instructions and warnings.
This document explains how to properly unpack the BRIONVEGA totem rr231. Please read All
Instructions and Warnings Before Unpacking. This operations must be carried out by TWO people to avoid da-
mage to the cabinet.
Remove the cardboard. Do not at-
tempt to remove the unit from the pal-
let without the assistance of another
person.
Cut the plastic straps that secure the
packaging to the pallet and lift the
cover.
CAUTION!
For warranty reasons, do not throw
away the packaging materials. TWO
people are needed to unpack the sy-
stem. Do not attempt to do it alone.
Lift the totem off the pallet and pla-
ce it on a perfectly horizontal plain.
This operation must be carried out
by TWO people to avoid damage to
the cabinet.
Remove the nylon that wraps the to-
tem and remove the protections pla-
ced between the speakers.
Lift the cover and remove the acces-
sory box.
Page 1
rr226-fo-st radiofonografo
UNPACKING AND PACKING INSTRUCTIONS
Keep the original packaging in case of need.
UNPACKING
This document explains how to properly unpack the BRIONVEGA rr226-fo-st radiofonografo. Please read All
Instructions and Warnings Before Unpacking.
CAUTION!
For warranty reasons, do not throw
away the packaging materials. TWO
people are needed to unpack the
radio. Do not attempt to do it alone.
Cut the plastic straps that secure
the packaging to the plastic pallet.
Lift the cover and remove the
accessory box.
Remove the cardboard from the
compartment opposite the one
where the center piece of the
radiofonografo is housed and then
remove the packaging from the
top. Do not attempt to remove the
unit from the pallet without the
assistance of another person.
Remove the cover of the record
player and the two padding on the
right/left by sliding them sideways.
Remove the upper crosspiece. Take
particular care in extracting the right
padding and the upper crosspiece
as they are adjacent to the arm of
the record player.
Remove the center piece of the
radiofonografo from its lower
housing by lifting it simultaneously
from both sides. This operation
must be carried out by TWO people
to avoid damage to the cabinet.
Remove the nylon cover.
Remove the adhesive tape from the
packaging containing the speakers.
Then remove the padding from
the upper compartment of the
cardboard.
Page 1
rr226-fo-st radiofonografo
BRIONVEGA
a division of
SIM2 BV INTERNATIONAL SRL
Via Udine 59
33061 Rivignano Teor (UD)
Italy
Tel. [phone]
[email protected]
www.brionvega.it
cod. 461264000
WARNING!
Product must be transported using the appropriate protective packaging.
Keep the original packaging in case of need.
Incorrect packaging may result in damages to the internal parts of the product.
SIM2 BV International assumes no liability whatsoever for failure to comply with the aforementioned
instructions and warnings.
rr226-fo-st radiofonografo
UNPACKING AND PACKING INSTRUCTIONS
Keep the original packaging in case of need.
UNPACKING
This document explains how to properly unpack the BRIONVEGA rr226-fo-st radiofonografo. Please read All
Instructions and Warnings Before Unpacking.
CAUTION!
For warranty reasons, do not throw
away the packaging materials. TWO
people are needed to unpack the
radio. Do not attempt to do it alone.
Cut the plastic straps that secure
the packaging to the plastic pallet.
Lift the cover and remove the
accessory box.
Remove the cardboard from the
compartment opposite the one
where the center piece of the
radiofonografo is housed and then
remove the packaging from the
top. Do not attempt to remove the
unit from the pallet without the
assistance of another person.
Remove the cover of the record
player and the two padding on the
right/left by sliding them sideways.
Remove the upper crosspiece. Take
particular care in extracting the right
padding and the upper crosspiece
as they are adjacent to the arm of
the record player.
Remove the center piece of the
radiofonografo from its lower
housing by lifting it simultaneously
from both sides. This operation
must be carried out by TWO people
to avoid damage to the cabinet.
Remove the nylon cover.
Remove the adhesive tape from the
packaging containing the speakers.
Then remove the padding from
the upper compartment of the
cardboard.
Page 1
rr226-fo-st radiofonografo
BRIONVEGA
a division of
SIM2 BV INTERNATIONAL SRL
Via Udine 59
33061 Rivignano Teor (UD)
Italy
Tel. [phone]
[email protected]
www.brionvega.it
cod. 461264000
WARNING!
Product must be transported using the appropriate protective packaging.
Keep the original packaging in case of need.
Incorrect packaging may result in damages to the internal parts of the product.
SIM2 BV International assumes no liability whatsoever for failure to comply with the aforementioned
instructions and warnings.
rr226-fo-st radiofonografo
UNPACKING AND PACKING INSTRUCTIONS
Keep the original packaging in case of need.
UNPACKING
This document explains how to properly unpack the BRIONVEGA rr226-fo-st radiofonografo. Please read All
Instructions and Warnings Before Unpacking.
CAUTION!
For warranty reasons, do not throw
away the packaging materials. TWO
people are needed to unpack the
radio. Do not attempt to do it alone.
Cut the plastic straps that secure
the packaging to the plastic pallet.
Lift the cover and remove the
accessory box.
Remove the cardboard from the
compartment opposite the one
where the center piece of the
radiofonografo is housed and then
remove the packaging from the
top. Do not attempt to remove the
unit from the pallet without the
assistance of another person.
Remove the cover of the record
player and the two padding on the
right/left by sliding them sideways.
Remove the upper crosspiece. Take
particular care in extracting the right
padding and the upper crosspiece
as they are adjacent to the arm of
the record player.
Remove the center piece of the
radiofonografo from its lower
housing by lifting it simultaneously
from both sides. This operation
must be carried out by TWO people
to avoid damage to the cabinet.
Remove the nylon cover.
Remove the adhesive tape from the
packaging containing the speakers.
Then remove the padding from
the upper compartment of the
cardboard.
Page 1
rr226-fo-st radiofonografo
BRIONVEGA
a division of
SIM2 BV INTERNATIONAL SRL
Via Udine 59
33061 Rivignano Teor (UD)
Italy
Tel. [phone]
[email protected]
www.brionvega.it
cod. 461264000
WARNING!
Product must be transported using the appropriate protective packaging.
Keep the original packaging in case of need.
Incorrect packaging may result in damages to the internal parts of the product.
SIM2 BV International assumes no liability whatsoever for failure to comply with the aforementioned
instructions and warnings.
rr231 totem

Using the two upper handles, lift the
two speakers. Remove the nylon
bags.
Position the hook located on the upper internal side of the speakers inside
the slot of the radiofonografo cabinet. Be particularly careful to center it to
avoid scratching and / or damaging the paint.
PACKAGING
This document explains how to properly pack the BRIONVEGA rr226-fo-st radiofonografo. Please read All
Instructions and Warnings Before packing.
This picture shows the carton
boxes and paddings necessary
for the correct packaging of the
radiofonografo.
To pack the speakers, place the
three paddings on the bottom of
the box. Place the speakers in the
relative nylon bag. Insert them in the
carton box.
Place the three top paddings in the
speaker box.
Seal the speakers box with adhesive
tape.
Insert the center piece of the
radiofonografo into its nylon bag
and place it inside the special
housing of the lower padding of the
packaging box. This operation must
be performed by TWO people. Do
not attempt to do it alone.
Position the right and left padding on
the sides of the radiofonografo. Pay
close attention to the shape of the
padding to distinguish the right side
from the left side. When inserting
the right padding, take care not to
force it too hard to avoid damaging
the arm of the record player.
Insert the crosspiece, being careful
[V Ä[ P[ HWWYVWYPH[LS` PU [OL ZSP[Z VM
the right and left side paddings.
Place the cover of the record player
on top of the crosspiece.
Insert the cardboard in the
compartment opposite to where the
center piece of the radiofonografo
is housed and then insert the
cardboard packaging from above.
This last operation must be carried
out by TWO people to avoid
breakage.
Place the accessory box on top of
the radiofonografo center piece and
insert the box lid to completely close
the packaging.
Tie the whole box with plastic straps. Please use plastic corners to prevent the plastic straps from damaging the
packaging once stretched. The plastic straps must tie the packaging to the plastic pallet.
WARNING!
Product must be transported using the appropriate protective packaging.
Keep the original packaging in case of need.
Incorrect packaging may result in damages to the internal parts of the product.
SIM2 BV International assumes no liability whatsoever for failure to comply with the aforementioned
instructions and warnings.
Page 2 Page 3
This document explains how to properly pack the BRIONVEGA totem rr231. Please read
All Instructions and Warnings Before Packing. This operations must be carried out by TWO people to avoid da-
mage to the cabinet.
Place the protections on the four si-
des of the totem.
Wrap the totem into its nylon bag.Place the totem in the pallet base of
the packaging. This operation must
be carried out by TWO people to
avoid damage to the cabinet. Insert
the protections placed between the
two loudspeakers and between the
loudspeakers and the central body.
Page 2
Using the two upper handles, lift the
two speakers. Remove the nylon
bags.
Position the hook located on the upper internal side of the speakers inside
the slot of the radiofonografo cabinet. Be particularly careful to center it to
avoid scratching and / or damaging the paint.
PACKAGING
This document explains how to properly pack the BRIONVEGA rr226-fo-st radiofonografo. Please read All
Instructions and Warnings Before packing.
This picture shows the carton
boxes and paddings necessary
for the correct packaging of the
radiofonografo.
To pack the speakers, place the
three paddings on the bottom of
the box. Place the speakers in the
relative nylon bag. Insert them in the
carton box.
Place the three top paddings in the
speaker box.
Seal the speakers box with adhesive
tape.
Insert the center piece of the
radiofonografo into its nylon bag
and place it inside the special
housing of the lower padding of the
packaging box. This operation must
be performed by TWO people. Do
not attempt to do it alone.
Position the right and left padding on
the sides of the radiofonografo. Pay
close attention to the shape of the
padding to distinguish the right side
from the left side. When inserting
the right padding, take care not to
force it too hard to avoid damaging
the arm of the record player.
Insert the crosspiece, being careful
[V Ä[ P[ HWWYVWYPH[LS` PU [OL ZSP[Z VM
the right and left side paddings.
Place the cover of the record player
on top of the crosspiece.
Insert the cardboard in the
compartment opposite to where the
center piece of the radiofonografo
is housed and then insert the
cardboard packaging from above.
This last operation must be carried
out by TWO people to avoid
breakage.
Place the accessory box on top of
the radiofonografo center piece and
insert the box lid to completely close
the packaging.
Tie the whole box with plastic straps. Please use plastic corners to prevent the plastic straps from damaging the
packaging once stretched. The plastic straps must tie the packaging to the plastic pallet.
WARNING!
Product must be transported using the appropriate protective packaging.
Keep the original packaging in case of need.
Incorrect packaging may result in damages to the internal parts of the product.
SIM2 BV International assumes no liability whatsoever for failure to comply with the aforementioned
instructions and warnings.
Page 2 Page 3
rr226-fo-st radiofonografo
UNPACKING AND PACKING INSTRUCTIONS
Keep the original packaging in case of need.
UNPACKING
This document explains how to properly unpack the BRIONVEGA rr226-fo-st radiofonografo. Please read All
Instructions and Warnings Before Unpacking.
CAUTION!
For warranty reasons, do not throw
away the packaging materials. TWO
people are needed to unpack the
radio. Do not attempt to do it alone.
Cut the plastic straps that secure
the packaging to the plastic pallet.
Lift the cover and remove the
accessory box.
Remove the cardboard from the
compartment opposite the one
where the center piece of the
radiofonografo is housed and then
remove the packaging from the
top. Do not attempt to remove the
unit from the pallet without the
assistance of another person.
Remove the cover of the record
player and the two padding on the
right/left by sliding them sideways.
Remove the upper crosspiece. Take
particular care in extracting the right
padding and the upper crosspiece
as they are adjacent to the arm of
the record player.
Remove the center piece of the
radiofonografo from its lower
housing by lifting it simultaneously
from both sides. This operation
must be carried out by TWO people
to avoid damage to the cabinet.
Remove the nylon cover.
Remove the adhesive tape from the
packaging containing the speakers.
Then remove the padding from
the upper compartment of the
cardboard.
Page 1
rr226-fo-st radiofonografo
BRIONVEGA
a division of
SIM2 BV INTERNATIONAL SRL
Via Udine 59
33061 Rivignano Teor (UD)
Italy
Tel. [phone]
[email protected]
www.brionvega.it
cod. 461264000
WARNING!
Product must be transported using the appropriate protective packaging.
Keep the original packaging in case of need.
Incorrect packaging may result in damages to the internal parts of the product.
SIM2 BV International assumes no liability whatsoever for failure to comply with the aforementioned
instructions and warnings.
Tie the whole box with plastic straps.
Please use plastic corners to prevent
the plastic straps from damaging the
packaging once stretched. The pla-
stic straps must tie the packaging to
the plastic pallet.
Place the accessory box in the up-
per part and then the cover of the
cardboard.
Insert the cardboard.
WARNING!
Product must be transported using the appropriate protective packaging.
Keep the original packaging in case of need.
Incorrect packaging may result in damages to the internal parts of the product.
BV2 srl assumes no liability whatsoever for failure to comply with the aforementioned instructions and
warnings.