Britton Britton Hip+ User manual

Söögitool Britton Hip+
Barošanas krēsls Britton Hip+
Стул для кормления Britton Hip+
Highchair Britton Hip+
ET
EN
FI
LT
LV
RU
PL
Syöttötuoli Britton Hip+
Maitinimo kéduté„Britton Hip+“
Krzesełko do karmienia Britton Hip+
SV
Matstolen Britton Hip+

1
IMPORTANT
Read carefully and retain for future reference.
Highchair Britton Hip+ is suitable for children who are able to sit unaided (appr.
6-9 months up to 36 months).
The multi-position height adjustment of the highchair means that it is suitable for
use from breakfast bar to coee table and its recline seat allows baby to relax.
Britton Hip+ is free standing when folded for your convenience.
The large wipe clean tray can be quickly adjusted or removed.
The luxurious padded cover is easily removable for cleaning.
Safety notes
• Do not leave your child unattended.
• Do not use the highchair until your child can sit up unaided.
• Ensure your child wears a correctly tted and adjusted harness at all the times.
• Do not use highchair if any part is broken, torn or missing.
• Do not move the highchair with your child inside.
• Use only on a level and stable surface.
• Do not allow your child to climb unassisted into, play with or hang onto your
highchair. This is not a toy.
• Ensure children clear of all moving parts before making any adjustment.
• Do not use near stairs or steps.
• All additional hazards such as electrical ex should be kept out of reach of the
child in highchair.
• When not in use, store away form children.
• Do not use the highchair for a manner it was not designed for.
• Only use spares approved by manufacturer.
• Complies with BS EN 14988:2006.
Care & Maintenance
• Ensure all locking devices work correctly & regularly check the locks & ttings for
security.
• DO NOT use spray lubricants, simply wipe clean after use
• Stubborn marks can be removed with non-abrasive cream cleaner. Mild
disinfectants can also be used.
EN

Parts
Please retain all packaging until you are certain no parts are missing.
After assembly, please dispose of all packaging carefully, including the caps on the
ends of the legs.
1. Two piece tray
2. Swivel join
3. Footrest
4. Front leg
5. Front foot (including 2 foot pads)
6. Seat unit
7. Harness
8. Inner Tray release catch
9. Seat Recline
10. Basket (If specied)
11. Rear Leg
12. Folding mechanism (release catch)
13. Padded seat cover
14. Seat angle adjuster (under padded cover)
15. Rear leg
16. Folding mechanism (release catches)
17. Rear foot (including 2 Wheels)
18. Stops
19. Tray adjuster (underneath)
20. Front leg
21. Basket (If specied)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
2

Frame assembly
1. Remove frame from packaging.
2. Open the highchair base fully by squeezing both release catches (A) on the rear
legs and sliding them downwards until they click securely into place.
3. Put front and rear tube into plastic base side. Push until you hear the clicking
sound.
Fixing the seat unit
1. Carefully lower the seat onto the side adjusters, ensuring the front of the seat
lines up with the holes in the height adjuster.
2. Standing in front of the Highchair with both sets of holes aligned (you may need
to support the weight of the seat).
3. Secure seat with axel rod and attach clips on correct side.
Fitting the footrest
Fit the footrest by sliding the grooves over
the plastic fttings found on the bottom of the seat
until the footrest and seat unit are fush.
Footrest is not adjustable.
A
EN
3

Harness
A ve-point safety harness is provided to restrain
your child and should always be worn. Sliding adjusters
are tted and should be carefully adjusted so the harness
ts your child comfortably. To fasten the harness push
the prongs into the buckle. To release, push the prongs
(A) and remove from the buckle.
Pass the ends of the shoulder, waist and crotch straps
through the vertical slots in the lower backrest, rotate the
ends, and pull back to secure.
The seat cover should come already positioned on the highchair, however it may be
necessary to remove these components for cleaning purposes.
To remove the seat insert undo the harness and thread the shoulder and crotch
straps through the seat insert slots and simply remove.
IMPORTANT: SAFETY NOTE
The seat cover may be sponge cleaned only. If you feel the need to remove the seat
cover, for ease of cleaning, please ensure that you carefully follow the instructions
outlined in part 7 on how to correctly re-thread the safety harness.
Fitting the wheels and stoppers
Turn frame to side postion.
Remove wheels and stoppers form packaging.
Insert 2 wheels into rear plastic base.
Insert 2 stoppers into front plastic base.
Fitting the tray
To remove the tray from the back legs simply lift o.
Lower the tray arms into position by pulling down-
ward until a loud click is heard.
Position the tray over the arms and pull outward on
the front lever found on the underside of the tray,
whilst sliding the tray to the position required.
Use the front lever to position and or remove the tray
at any time.
4

The tray can be separated by releasing both catches (A) (found either side on the
top tray) and by lifting off. To secure together again, position the top tray over the
bottom tray and push down to secure (ensure this locates into position).
Adjusting the seat height
To adjust the height of the seat push in both of the
height adjusting locks (A) and simultaneously raise
or lower the seat, releasing both of the locks at the
required height.
Adjusting the seat recline
To adjust the angle of the seat, squeeze together the plastic mouldings (B) (found
on the back of the seat unit) and position as required, releasing the mechanism to
secure into place.
DO NOT recline the seat unit when the highchair is in its highest position.
IMPORTANT
During use the height adjustment may stick. Should this occur, and as part of the
regular maintenance routine, DO NOT use spray lubricants, simply wipe clean after
use.
A
B
To store the tray on the back legs of the highchair, align the
holes on the rear of the tray and hook onto the small bungs
on the back legs. The top tray can also be rested on the rear
legs but there are no hooks to secure.
NOTE: When using the highchair without the tray ensure
the tray arms are fully folded downwards and secured in
position. Never use the highchair with the tray arms in the
upright position.
EN
5

Folding the highchair
For a more compact fold, lower the seat height, t the tray to the back of the
highchair and fold the tray arms up before folding the highchair.
Fold the tray arms by pushing in the release button (A) on each arm and raise.
To fold the highchair, press in both of the release catches (B) on the back legs and
slide the rear legs forward, until both sets of legs touch.
Check the highchair is correctly folded before leaving to stand free.
AB
6
Importer: Speli Baltic OÜ, Tallinn. Tel. [phone]; [email protected]

TÄHTIS!
Loe käesolev juhend hoolikalt läbi ja hoia alles edaspidiseks kasutamiseks.
Britton Hip+ söögitool sobib lapsele, kes istub iseseisvalt (u. 6-9 elukuust kuni 36
elukuuni).
Britton Hip+ söögitool on kasutatav eri kõrgustel, mistõttu on seda mugav
kasutada nii kõrge köögileti kui madala kohvilaua taga. Tooli lamamisasendisse
reguleeritav seljatugi laseb lapsel puhata.
Britton Hip+ söögitool on seisab kokkupandult ise püsti.
Suur ja kergelt puhastatav kandik on lihtsalt reguleeritav ja eemaldatav.
Luksuslikult polsterdatud istmekate on puhastamiseks lihtsalt eemaldatav.
Turvanõuded
• Ära kunagi jäta oma last järelevalveta.
• Söögitooli tohib panna lapse, kes suudab istuda iseseisvalt (6-9 elukuud).
• Veendu, et laps kannaks õigesse suurusesse reguleeritud turvarihmu kogu aeg.
• Ära kasuta söögitooli kui mingi osa on katki või kulunud.
• Ära liiguta tooli samal ajal kui laps istub toolis.
• Kasuta ainult tasasel pinnal.
• Ära luba lapsel järelevalveta tooli ronida, selles mängida või tooli küljes rippuda.
Söögitool ei ole mänguasi.
• Enne mistahes muudatuse tegemist veendu, et laps on liikuvatest osadest
eemal.
• Ära kunagi kasuta trepi või astmete lähedal.
• Kõik lisaohud, näiteks elektrijuhtmed, tuleb hoida lapsele kättesaamatus kohas.
• Kui toode ei ole kasutuses, hoiusta see lapsele kättesaamatus kohas.
• Toodet võib kasutada ainult selleks ettenähtud viisil. Igasuguse vale kasutamise
korral ei võta tootja endale vastutust.
• Kasuta ainult tootja poolt aktsepteeritud varuosi.
• Vastab BS EN 14988:2006 standardile.
Hooldus
• Veendu, et kõik lukustusmehhanismid töötaksid korralikult ning kontrolli neid
aegajalt.
• Ära kasuta pihustatavaid määrdeaineid. Puhasta lihtsalt niiske seebise lapiga.
• Tugeva mustuse eemaldamiseks võid kasutada mitte-abrasiivset kreemjat
puhastajat. Samuti võid kasutada pehmet desintseerijat.
7
ET

Osad
Enne toote kokku panemist veendu, et kõik vajalikud osad on olemas.
Pärast kokkupanekut viska kõik pakendidetailid hoolikalt ära.
1. Kaheosaline kandik
2. Metallkinnitus
3. Jalatugi
4. Esijalg
5. Esijalg (koos piduritega)
6. Iste
7. Turvarihmad
8. Sisemise kandiku vabastamise konks
9. Istme kõrguse regulaator
10. Korv (kui sisaldub komplektis)
11. Tagumine jalg
12. Kokkupaneku mehhanism
13. Polsterdatud istmekate
14. Seljatoe kalde regulaator (istmekatte all)
15. Tagumine jalg
16. Kokkupaneku mehhanism
17. Tagumine jalg (koos 2 rattaga)
18. Stopperid
19. Kandiku regulaator (allservas)
20. Esijalg
21. Korv (kui sisaldub komplektis)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
8