Broan Best K7388 Series User manual

SPECIFICATION SHEET
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
K7388 SERIES
RANGE HOODS
A hand-formed, gently curving glass canopy creates
a dramatic, contemporary appearance and an open,
airy feel.
FEATURES
•Italian design
•Wall mount
•Finishes: 430 Stainless Steel #4 Brushed
•Width: 35-7/16”
•Ducted/non-ducted telescopic flue accommodates 8’ to 9’
ceilings
•6” round duct connector/backdraft damper
•Halogen lighting (2 x 20 watt, 12V, Type JC 12V 20W G4
Base) with multilevels from bright cooktop illumination to
a low nighttime setting (bulbs included)
•Advanced, electronic push-button controls feature delay
shutoff
•Quiet, variable-speed centrifugal blower with high-
efficiency motor produces 450 CFM of exhaust
•Four-speed motor controls include an optimum blower
memory setting for everyday use
•Delay timer control automatically shuts off range hood
after five minutes
•Special control indicates when it’s time to clean the filter
•Can be ducted to the outside or non-ducted for indoor
recirculation (purchase recirculation kit separately)
•Dishwasher-safe filter features a quick-release latch and
decorative cover plate
•Heat SentryTM - automatically turns blower to high speed
when excess cooking heat is detected
OPTIONS
•Backsplash available (Contact Broan Technical Support)
•Replacement grease filters available
•Non-ducted recirculation kit (Model NDK7388)
•Flue extension for 10’ ceiling (for ducted applications)
(Model FEXTK7388SS) (35-1/2” long)
•Replacement charcoal filters available (Model
FILTERSQUARE)
•Replacement bulb (Part No. SB02300891)
60E 99043161D
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 3.13 450 9.0 6” round
HVI-2100 CERTIFIED RATINGS
comply with new testing technologies
and procedures prescribed by the
Home Ventilating Institute, for off-the-
shelf products, as they are available
to consumers. Product performance
is rated at 0.1 in. static pressure,
based on tests conducted in AMCA’s
state-of-the-art test laboratory. Sones
are a measure of humanly-perceived
loudness, based on laboratory
measurements.
min 32"
max 48"
21-1/4"
3-5/16"

BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
K7388 SERIES WIRING
K7388 SERIES MOUNTING
120 VOLT 60 HZ GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 9” FLUE
COVER DIMENSIONS)
18” - 22”
NOTES:
1. Minimum hood distance above
cooktop must not be less than 24”.
A maximum of 30” above the
cooktop is highly recommended for
best capture of cooking impurities.
Distances over 30” above the
cooktop are at the installer’s and
user’s discretion - providing that
ceiling height and flue length
permit.
L
L
C
5 "
1
16
FRAMING BEHIND
WOOD CROSS
SUPPORT
WOOD CROSS SUPPORT –
SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
DRYWALL
MOUNTING
BRACKET
LOCATION
(ABOVE 36” HIGH
COOKTOP)
CEILING DUCT
HOOD DISTANCE ABOVE 36” COOK TOP (SEE NOTE 1)
HEIGHT METHOD 24” 25” 26” 27” 28” 29” 30”
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
8 FEET
DUCTED 37” 38” 39” 40” 41”
NONDUCTED 37” 38” 39” 40”
9 FEET DUCTED OR 37 38” 39” 40” 41” 42” 43”
NONDUCTED
10 FEET DUCTED WITH
FEXT7388 39” 40” 41” 42” 43”
CENTER LINE OF
HOOD & DUCT
9”
4½”