Broan Best K210A Series User manual

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
70B 99044050A
Provides high ventilation and durable construction
to meet the needs of professional-style cooking
appliances. A complete installation requires several
optional components.
FEATURES
•430 Stainless Steel construction and appliance colors
in White and Black
•Hood width: 30”, 36”, 42” or 48”
•Halogen lighting (2 x 50 watt GU10 for 30” and 36”
hood, 3 x 50 watt GU10 for 42” and 48” hood) Lamps
included
•Switch controls: lighting, on-off, blower infinite speed
•Easily accessible, dishwasher-safe filters
•Heat Sentry turns blower ON to HIGH speed when
excess heat is detected
OPTION
•Backsplash (RMP Series): Widths - 30”, 36”, 42” or 48”
Stainless Steel construction - protects back wall and
wipes clean easily
•Designed for use with interior blower models P5 or P8,
exterior blower models EB6, EB9, EB12, or EB15, and
in-line blower models ILB3, ILB6, ILB9 or ILB11
(Purchase blowers separately)
•Baffle filters available (BFK Series)
SPECIFICATIONS
120 VAC, 60 Hz
Amps for 30” and 36” hood (without blower): 0.8 A
Amps for 42” and 48” hood (without blower): 1.3 A
K210A SERIES
RANGE HOOD
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
Backsplash
RMP Series

HL0070
- 3 -
Backsplash (RMP Series)
(Stainless steel wall covering
with warming shelves. Optional)
Model 418
10” Round adjustable
elbow (optional)
Model 415
7” Round adjustable
elbow (optional)
Model 412
transition
(3¼” x 10” to 7”)
Adapter and damper 3¼’’ x 10’’
(supplied with P5 and P8 blowers)
Adapter and damper
3¼’’ x 14’’ (supplied with P8 blower)
Standard
3¼” x 10”
duct Standard
3¼” x 14” duct
Model P5
single-blower
(500 cfm)
K210A HOOD
- K210A MODEL RANGE HOOD SYSTEM -
INTERIOR BLOWERS-
Flow deviator
(vertical exhaust only)
(supplied with P5 and P8 blowers)
Model 647
(7” Round wall cap)
Model 634 or 644
(roof cap)
Model 643
(8” Round wall cap)
8” Round
standard
duct
Model 407
(7” Round—
2 ft sections)
Model 413
transition
(3¼” x 10” to 8”)
Model 459 transition
(3¼” x 14” to 8”)
Model P8 dual-blower (900 cfm)
For use with 36” hoods or wider
NOTE: The dual blower P8 must be
installed with 3¼” x 14’’ duct. If it is
impossible to connect the dual
blower P8 to a 3¼” x 14’’ duct, use a
3¼” x 10’’ duct. In that case, the
blower performance will be
decreased by 25%.
Rough-in kit
(supplied with P5 and P8 blowers)

- 4 -
HL0071
RMP Series Backsplash
(Stainless Steel wall
covering with warming
shelves. Optional)
K210A HOOD
- K210A MODEL RANGE HOOD SYSTEM -
IN-LINE AND EXTERIOR BLOWERS
In-line and exterior blower rough-in kit
(included with EB6, EB9, EB12, EB15,
ILB3, ILB6, ILB9 and ILB11 blowers).
Model 418
10” Round
adjustable elbow
(optional)
Model ILB3 (280 cfm)
in-line blower
(includes one 8” to 10”
round transition)
Model EB6 (600 cfm)
or EB9 (900 cfm)
exterior blower
Model EB12 (1200 cfm)
or EB15 (1500 cfm)
exterior blower
Model 441
(10” Round
wall cap)
Model 437
(High capacity roof cap)
Model 441
(10” Round wall cap)
Model 421
(10” Round vert.
in-line damper)
Recommended
for use with
exterior blowers
Model 410
(10” Round duct
—2 ft. sections)
Model ILB6 (600 cfm)
in-line blower
(includes two 4½” x 18½”
to 10’’ round transitions)
Model ILB9 (800 cfm)
or ILB11 (1100 cfm)
in-line blower
(includes two 8” x 12” to
10’’ round transitions)