Broan Best KER222 Series User manual

SPECIFICATION SHEET
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
KER222 SERIES
RANGE HOODS
Tubular, wrap-around utensil rail serves as both
a stunning accent and a practical addition to this
elegant design. Side rails can be conveniently
removed for installation between cabinets.
FEATURES
•Italian design
•Wall mount
•Finishes: 304 Stainless Steel #4 Brushed, White, Black,
Polished Brass, Brushed Copper
•Widths: 90cm (35-7/16”), 42”, 48”
•
•8” round duct connector/backdraft damper
•Halogen lighting (90cm: 2 x 20 watt; 42” and 48”: 4 x 20
watt, Type JC 12V 20W G4 Base - bulbs included)
•Pushbutton controls: on/off lights, four speeds, delay-off,

•Twin centrifugal blower
•
•Heat SentryTM - automatically turns blower to high speed
when excess cooking heat is detected
OPTIONS
•Backsplash available (Model BSK1)
•
long)
•
•Replacement bulb (Part No. SB02300891)
•
900, 1200, or 1500 CFM exhaust
SPECIFICATIONS
 
 comply with new
testing technologies and procedures prescribed
by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers.
Product performance is rated at 0.1 in. static
      
state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based
on laboratory measurements.
VOLTS AMPS CFM SONES DUCT
120 5.83/6.26 1000 10.0 8” round

BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
L
L
C
A
2 "
3
16
A
KER222 SERIES WIRING KER222 SERIES MOUNTING
FRAMING BEHIND
WOOD CROSS
SUPPORT
WOOD CROSS
SUPPORT – SECURED
TO FRAMING AND
LOCATED BEHIND
DRYWALL
WIRING
BOX
AIR OUTLET Ø 7-7/8”
6-3/16”
DRYWALL
NOTE: Minimum hood distance above cooktop must not be less than 24”.
A maximum of 30” above the cooktop is highly recommended for best capture of cooking impurities.
Distances over 30” are at the installer and users’ discretion; and if ceiling height and flue length permit.
MOUNTING BRACKET LOCATION
(ABOVE 36” HIGH COOKTOP)
HOOD DIMENSION CEILING MOUNTING DISTANCE ABOVE 36” HIGH COOKTOP (SEE NOTE BELOW)
WIDTH A HEIGHT 24” 25” 26” 27” 28” 29” 30”
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
8 FEET 29-13/16” 30-13/16” 31-13/16” 32-13/16” 33-13/16”
90cm 9-5/8” 9 FEET 31-13/16” 32-13/16” 33-13/16” 34-13/16” 35-13/16”
35-7/16” 10 FEET WITH 29-13/16” 30-13/16” 31-13/16” 32-13/16” 33-13/16” 34-13/16” 35-13/16”
FEXTK42
8 FEET 31-1/16” 32-1/16” 33-1/16” 34-1/16” 35-1/16”
42” 9-15/16” 9 FEET 33-1/16” 34-1/16” 35-1/16” 36-1/16” 37-1/16”
10 FEET WITH 31-1/16” 32-1/16” 33-1/16” 34-1/16” 35-1/16” 36-1/16” 37-1/16”
FEXTK42
8 FEET 31-9/16” 32-9/16” 33-9/16” 34-9/16” 35-9/16”
48” 8-7/8” 9 FEET 33-9/16” 34-9/16” 35-9/16” 36-9/16” 37-9/16”
10 FEET WITH 31-9/16” 32-9/16” 33-9/16” 34-9/16” 35-9/16” 36-9/16” 37-9/16”
FEXTK42