Broan Best UP27E Series User manual

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted By Date
70K 99044126A
UP27E SERIES
RANGE HOOD
Best by Broan, P.O. Box 140, Hartford, WI 53027
Best by Broan, 550 Lemire Blvd., Drummonville, QC J2C 7W9 Canada
RMP Series Backsplash
(Optional)
For domestic
cooking only.
30” TO 48”
IN 6” INCREMENTS
30” TO 48”
IN 6” INCREMENTS
Offers modern styling, high performance, and durable
under-cabinet construction to meet the needs of
professional-quality residential cooktops.
A complete installation requires several optional components.
Refer to page 2 when planning your installation.
FEATURES
HOOD:
•Widths available - 30” to 48” in 6” increments
•Stainless Steel, 20 gauge, type 304
•Stainless Steel bafe lters with removable mesh element
- easily accessible, dishwasher safe
•Variable cooktop lighting (Uses 50W, GU10 halogen lamps.
30” & 36” wide hoods = 2 lamps, 42” & 48” wide hoods = 4
lamps. Bulbs included.)
•Solid-State, innite speed blower control with speed memory
•Exclusive, Heat Sentry™ turns blower ON to HIGH speed
when excess heat is detected
•Evolution™ lter - bafe lter with integrated micromesh
lter
BACKSPLASH:
RMP Series (Optional)
•Widths - 30” to 48” in 6” increments
•Stainless steel, 22 gauge, type 430 - protects back wall and
wipes clean easily
•Two (2) dual position condiment storage shelves
SPECIFICATION:
•120 VAC, 60 Hz,
•0.8 Amps without blower (30” & 36” widths)
1.7 Amps without blower (42” & 48” widths)
UP27E Series Hood

BEST BY BROAN
UP27E
HOOD SYSTEM
-UP27E SERIES RANGE HOOD SYSTEM -
IN-LINE AND EXTERIOR BLOWERS
In-line and exterior blower rough-in kit
(included with EB6, EB9, EB12, EB15,
ILB3, ILB6, ILB9 and ILB11 blowers.)
Model 418
10” Round
adjustable elbow
(optional)
Model ILB3 (280 cfm)
in-line blower
(includes one 8” to 10”
round transition)
Model EB6 (600 cfm)
or EB9(900 cfm)
exterior blower
Model EB12 (1200 cfm)
or EB15 (1500 cfm)
exterior blower
Model 441
(10” Round
wall cap)
Model 437
(High capacity roof cap)
Model 441
(10” Round wall cap)
Model 421
(10” Round vert.
in-line damper)
Recommended
for use with
exterior blowers
Model 410
(10” Round duct
—2ft. sections)
Model ILB6 (600 cfm)
in-line blower
(includes two 4½” x 18½”
to 10’’ round transitions)
Model ILB9 (800 cfm)
or ILB11 (1100 cfm)
in-line blower
(includes two 8” x 12” to
10’’ round transitions)
UP27E
SERIES HOOD
(Canopy with
blower controls
& lighting.
required for all
installations.)
Model 643
(8” Round
wall cap)