Broil King CSR-1TB User manual

4
LIMITED TWO-YEAR WARRANTY
This product is warranted to be free from defects in material and workmanship
under normal use and service for a for a period of two (2) years from the date of
purchase by the user thereof.
To obtain service during warranty period, call BKmfg. at 860-738-2200 for a
Return Authorization Number. Return Authorization Number MUST be
written on outside of carton to track the unit and avoid service delays. Then
return the appliance, insured and freight prepaid, to the BKmfg. factory: BKmfg.,
ATTN: REPAIR, 200 International Way, Winsted, CT 06098, Phone: 860-738-
2200, Fax: [phone]). Proof of purchase is required when requesting
warranty service - SAVE YOUR SALES RECEIPT. Send a copy of your receipt
along with a note stating your name, address, phone number, and the nature of
the problem, and requesting warranty service. Be sure to package the unit
carefully; we are not responsible for damage occurring during shipment to the
repair facility.
This warranty is extended only to the original purchaser and does not apply
Hot Plates
Use & Care Manual Models
CSR-1TB, CDR-1TB,
CDR-1TFBB
to shipping damage, accidental breakage, alteration, tampering, misuse or
abuse, commercial use, unreasonable use, or damage to the product (not
resulting from defect or malfunction) while in the possession of the consumer.
Lost or broken cordsets, breakage of glass, nonstick or other coatings are not
covered by this warranty.
BKmfg. disclaims all responsibility for consequential, incidental, or commercial
losses caused by the use of this product. Some states do not allow this
exclusion or limitation of incidental or consequential losses, so the foregoing
disclaimer may not apply to you. This warranty gives you specific legal rights,
and you may also have other legal rights, which vary from state to state.
Warranty is applicable only in USA.
Model Number:_________ Date of Purchase: ______________
Place of Purchase:_________________
To expedite all warranty claims please keep your dated sales receipt
from place of purchase.
12/3/2020 RV05
CDR-1TFBB
120 Volts
1650 Volts
13.8 Amps
CSR-1TB
120 Volts
1100 Watts/
9 Amps
CDR-1TB
120 Volts
1650 Watts/
15 Amps
200 International Way, Winsted CT, 06908
(860)- 738-2200 Fax [phone]
Website: www.broilking.com Email: [e-mail]

2
3
Congratulations on your purchase of a BroilKing Professional Hot Plate. We offer
a line of Professional products designed and engineered to bring commercial
quality, durability and dependability to the home kitchen. BroilKing Professional
Ho Plates duplicate the structural design, materials and components of the
equipment used in the finest restaurants and hotels. Professional models warranted
FOR HOME USE ONLY.
IMPORTANT SAFEGUARDS
1. Read all instructions before use.
2. Do not touch hot surfaces! Always use hot pad or pot holder until unit cools.
3. To protect against electrical hazards, do not immerse cord, plug, or hot plate
in water or any other liquid.
4. Close supervision is necessary when any appliance is used by or near
children.
5. Unplug from outlet before cleaning. Allow to cool completely before
putting on or taking off parts.
6. Do not operate any appliance with a damaged cord or plug or, if the
appliance malfunctions or has been damaged in any manner. Call Factory
Service at 860-738-2200.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter or touch hot surfaces.
9. Do not use appliance for other than intended use.
10. Do not clean with metal scouring pads. Pieces can break off the pad and
touch electrical parts, creating a shock hazard.
11.
A fire may occur if this appliance is covered or touching flammable
material, including curtains, walls, etc., when in operation. To avoid
excessive heat on wall(s) while cooking, always keep a space of at
least 4 between your BroilKing hot plate and your rear and side walls.
12. Do not use plastic dishes or plastic wraps on heating elements.
SAVE THESE INSTRUCTIONS
IMPORTANT NOTES
1. Your unit is equipped with a grounded, current-carrying 3 pronged plug which
will fit into any standard 3 pronged outlet. This is a safety feature. Electrical
connection must be a proper outlet for the 3 pronged cord. Before
connecting power, make sure the voltage and frequency correspond
to the data plate on theunit.
2. A short power cord is provided to reduce the hazards resulting from
accidents such as tripping, entanglement, etc.
-If a long cord set or extension cord is used:
(A) The marketed electrical rating of the cord set or extension cord should
be at least as great as the electrical rating of the appliance.
(B) The longer cord should be arranged so that it will not drape over the
countertop or tabletop, where it can be pulled on by children or tripped over
accidentally.
3. Call BroilKing Customer Service at 860-738-2200 with any questions or
service needs.
INITIAL USE
Heat the appliance without a pot for approximately 10 minutes at maximum
setting in order for the special coating to seal. Temporary smoking is normal
during initial use.
OPERATING INSTRUCTIONS
1. Avoid letting water or food drop or boil over onto heating element.
If liquids or other foreign material are allowed to drip down through
the element pan and into the housing, the warranty is voided.
2. Rocker switch light will come on when hot plate is plugged into electric outlet
and the rocker switch is put in "ON" position.
Round signal light(s) will come on when heat control knob is turned from"OFF"
to a heat setting. They will cycle on off as the element maintains temperature.
3. As with all countertop hot plates as well as stovetops, the most efficient
cooking/heating will be done when using pans that are closest in diameter
to the heating element. For best results, the pot or pan used should not
exceed the heating element diameter.
CSR-1TB, CDR-1TB, CDR-1TFBB: 6" diameter coil element(s)
4. Be sure your Hot Plate is resting level on countertop. Avoid using pans that
are unstable and easily tipped.
5.
To avoid excessive heat on wall(s) while cooking, always keep a space
of at least 4 between your hot plate and your rear and side walls.
6. Always place the appliance on a heat-resistant surface.
CLEANING & MAINTENANCE INSTRUCTIONS
1. Always unplug hot plate from electric outlet and allow to cool before
cleaning. Caution: Heating element may be hot without glowing red. Be
sure element is cool before touching.
2.
Coil models:cleanthe element(s) by grippingan element atthe point opposite
where it goes into the holes in the drip pan and tilting it up
it up. Do not
force it up higher that it will go easily.) Clean the element and drip
area. If liquids or other foreign material are allowed to drip down
through the element pan and into the housing, the warranty is voided.
4. Use damp cloth with mild detergent to clean stainless surfaces - NEVER
USE ABRASIVES OR STEEL WOOL ON FINISHED SURFACES. To polish,
use a non-abrasive glass cleaner.
5. Thoroughly wipe soap and water from surface of hot plate and heating
element. DO NOT IMMERSE UNIT IN LIQUID. Make sure that no water can
infiltrate the heat vents or the bottom of unit.
6. Leave unit unplugged when not in use.