Bromic Heating CVE-10E-15 User manual

Curved Glass Delicatessen Displays
Commercial Refrigeration Range
ATTENTION: THE BROMIC DELICATESSEN DISPLAY REFRIGERATION RANGE IS NOT
APPROVED FOR DOMESTIC USE
If you have purchased a unit for domestic application, please contact
your supplier or Bromic refrigeration immediately

1. INDICATIONS AND PROHIBITIONS
2. ASSEMBLY AND INSTALLATION
3. ELECTRIC CONNECTION
4. JOINT KIT ASSEMBLY
5. CLEANING AND MAINTENANCE
6. SPARE PARTS
INDEX

Leave working serve over counter 1 hour without product
After 1 hour you can place the products inside the unit
1. INDICATIONS AND PROHIBITIONS
1
2
3
CVE-10E-25
CVE-10E-30
x2

x10
x6
x4
x4
x4
M4x20 DIN 7985
4.8x25 DIN CE
M6x30 EXAG DIN 933 INOX M6 DIN 934
CVE-10E-15/-20
CVE-10E-25/-30
x6
x9
CVE-10E-15/-20
CVE-10E-25/-30
x4
x6
CVE-12-15/-20
CVE-12-25/-30
x3
x6
STOCKTAKING
YOU ILL
NEED ALLEN
N5
BRACKETS
GLASSES
4.2x13 DIN 798
CVE-10E-15/-20
CVE-10E-25/-30
x6
x12

Always screw manually, do not use electrical tools
2. ASSEMBLY AND INSTALLATION
REMOVE TOP FIRTS
THEN REMOVE
FRONT/BACK
AND SIDES
CAREFULLY

CVE-10-E
STEP 1: REMOVE DISPLAY AREA ELEMENTS
LEVEL AND FIX THE MACHINE
PLACING OF BRACKETS
STEP 2: REMOVE FRONT GRILLE

M6 DIN 934
4.2x13
DIN 7981
CVE-10-E
STEP 4: PLACING BRACKETS AT MACHINE
4b. SCRE THE BRACKET AT
THE MACHINE IN THE BACK
4a. SCRE THE BRACKET AT
THE MACHINE IN THE FRONT

M6x20 DIN 933
M6 DIN 934
4.2x13
DIN 7981
ONLY VE-10E-25/-30
CVE-10-E
SCRE THE BRACKET AT THE
MACHINE IN FRONT
SCRE THE BRACKET AT THE
MACHINE IN THE BACK
CENTRAL BRACKET ONLY AT VE-10E-25/-30 MODELS

STEP 5: PLACE THE FRONT GRILLE AT THE MACHINE
STEP 6: PLACE THE DISPLAY AREA ELEMENTS AT THE MACHINE

CVE‐10‐E
M6x10EXAG,DIN933
INOX
PLACING THEALUMINUMWORKTOP
KINDOFSCREWS
x1
0
x
6
x4 x4
x4
M4x20DIN7985
KINDOFGLASSES
VE‐10E‐15‐CVE‐10E‐20‐CVE‐10E‐25‐CVE‐10E‐30‐C
4.8x25DINCE
ATTENTION:
NOTSCREW(ONLY
PLACETHESCREWS)
TOHAVETHE
POSSIBILITYTO
ADJUSTTHE
WORKTOP
POSITIONINNEXT
STEPS

4.8x25 DIN CE
M4x20 DIN 7985 ZIN
STEP 2: SCRE THE GLASSES AT THE ALUMINIUM UPPER PROFILE
GLASSES
STEP 3: SCRE BOTH GLASSES AT THE SIDE PANEL
CVE-10-E
ATTENTION:
ORKTOP
POSSITION CAN
BE ADJUSTED
(FRONT/BACK)
DURING THIS STEP
STEP 1: PLACE THE GLASSES IN THE SIDE PANEL
ATTENTION:
ORKTOP POSSITION CAN BE
ADJUSTED (LEFT/RIGHT)
DURING THIS STEP TO ADJUST
THE POSITION OF GLASSES

CVE-10-E
STEP 4: PUT THE ANTI-FOG
STEP 5: PLACE THE GLASSES

M6x10 DIN 913
STEP 6: PLACE THE FRONT GLASSES IN THE JA AND SCRE
ALLEN NUMBER 5
ATTENTION:
CHECK ADJUSTMENT BET EEN
ALUMINIUM PROFILES
T O DIFFERENT PROFILES
STEP 8: CHECK ADJUSTMENT

3.ELECTRIC CONNECTION
CVE-10E-15
CVE-10E-20
CVE-10E-25
CVE-10E-30
x2
x3
x4
x4
PLEXI SLIDING DOORS

PLACE THE PLEXI DOORS AT THE LO ER SUPPORT AND AT THE UPPER ALUMINIUM PROFILE
REPEAT THE PROCESS ITH ALL THE PLEXI DOORS
1
2

Always screw manually, do not use electrical tools
4. JOINT KIT ASSEMBLY
M8x20 ALLEN M8 DIN 934
x2
x3
4.2x13 DIN
798
M8x10 EXAG DIN 933
INOX
x8
x12
FLAT ASHER
x8
STOCKTAKING
STEP 1: UNSCRE THE GLASS
4.8x25 DIN CE
M4x20 DIN 7985 ZIN
x2x4
"L" JOINT ALUMINIUM PLATE
M8x50 ALLEN
x1

STEP 2: REMOVE GLASS
STEP 3: REMOVE DISPLAY AREA ELEMENTS

STEP 4: REMOVE THE SIDE PANEL FROM INTERIOR
STEP 5: UNSCRE THE SIDE PANEL COMPLETELY

STEP 6: ALSO SCRE S FROM THE BACK SIDE
STEP 7: REMOVE THE SIDE PANEL