Brook SOBK210EBL User manual

1
Brook Bottom Load Water Dispenser
User and Care Manual
Model No.: SOBK210EBL
SOBK210MBL
Please read the manual carefully before operating your water dispenser.
Retain it for future reference.

2
SAFETY PRECAUTIONS
To reduce risk of injury and property damage, user must read this entire
guide before assembling, installing & operating dispenser.
Failure to execute the instructions in this manual can cause personal
injury or property damage.
This product dispenses water at above 176℉. Failure to use properly can
cause personal injury.
When operating this dispenser, always exercise basic safety precautions,
including the following:
lPrior to use, this dispenser must be properly assembled and installed in
accordance with this manual.
lThis dispenser is intended for water dispensing only. Do NOT use other
liquids. Do NOT use for other purposes. Never use any other liquid in the
dispenser other than known and microbiologically safe bottled water.
lThis appliance is intended for use by adults. Direct adult supervision should
be maintained if this appliance is used by a child.
lFor indoor use only. Keep water dispenser in a dry place away from direct
sunlight. Do NOT use outdoors.
lInstall and use only on a hard, flat, and level surface that is substantial
enough to support the weight of the water cooler and the water coolers
contents.
lDo NOT place dispenser in an enclosed space or cabinet.
lDo NOT operate dispenser in the presence of explosive fumes. Do not
store flammable or explosive substances such as aerosol cans with a
flammable propellant in or near this appliance.
lUse only properly grounded outlets .Do not use an extension cord with your
water dispenser.
lAlways grasp plug and pull straight out from outlet. Never unplug by pulling
on the power cord.

3
lDo NOT use dispenser if cord becomes frayed or otherwise damaged.
lTo protect against electric shock, do NOT immerse cord, plug, or any other
part of dispenser in water or other liquids.
lEnsure dispenser is unplugged prior to cleaning.
lService should be performed only by a certified technician.
lNever turn the machine upside down or lean it more than 45 degree.
lThe machine should not be turned on until at least 3 minutes after turning
off the power switch
Warning: Do not strike, bend or otherwise damage the exposed refrigerant
coils on the rear of the cooler. This can cause failure of the refrigeration
system.
PARTS NAME
3
4
1
5
6
7
8
11
10
10
2
9

4
No.
Parts Name
No.
Parts Name
1
Hot water push button with
safety lock (only available for
SOBK210MBL)
8
Dip tube
2
Cold water push button (only
available for SOBK210MBL)
9
Bottle lock handle
3
LED display
10
Drain valve
4
Nozzle
11
Hot switch
5
Lower door
6
Drip tray
7
Lower door latch
OPERATION INTERFACE

5
lDispense hot water: touch safety lock icon until a beep is heard, then
release the safety lock icon and touch the hot water icon within 3 seconds
(model # SOBK210EBL), or ( for model # SOBK210EBL) unlock safety lock,
then depress hot water push button to dispense hot water.
Note: Not following hot water start up instructions, located on page 6
of this manual, will cause serious damage to this appliance.
lDispense cold water:touch safety lock icon until a beep is heard, then
release the safety lock icon and touch the cold water icon within 3 seconds
(model no.: SOBK210EBL), or depress cold water push button to dispense
cold water (model no.: SOBK210EBL).
lSet hot temperature: touch and hold SET icon about 5 seconds till the hot
temperature icon flashes, release the SET icon, then touch the Empty icon.
The hot temperature will flash from 176℉,185℉to 194℉.Each number
will flash for about 2 seconds. Release the LEAKING icon when your
desired temperature appears.
lSet cold temperature: touch and hold the SET icon about 5 seconds until
the cold temperature icon flashes. Release the SET icon, then touch the
Empty icon. The cold temperature will be flash from 52℉,46℉to 41℉.
Each number will flash for about 2 seconds. Release the Empty icon when
your desired temperature appears.
lSet clock: touch and hold the SET icon until the hour icon flashes. Release
the SET icon, then touch the Empty icon. The hour digits will scroll until the
icon is released when the desired hour is displayed. Repeat this step for
the minutes. The cooler will automatically return to standard display after
10 seconds without input.
lNight light: The night light can be turned off or on by touching the light icon.
lEnergy Save: Touch LIGHT icon for about 2 seconds, then touch LIGHT
icon again for about 10 seconds till three bee are heard, all icons turn off for
energy save. Touch LIGHT icon again for about 2 seconds, then touch
LIGHT icon for about 10 seconds till three bee are heard, all icons turn on,
the cooler returns to standard display.

6
lEmpty: the cooler is designed with a built in empty detector. If bottle empty
detected, the empty icon will flash, the pumps, cooling, heating and
dispensing icons will be disabled until the full water bottle replaced. After
replaced a full water bottle, touch the empty icon for about 3 seconds, the
cooler returns to standard working condition.
START UP
1. Install drip tray below faucet.
2. Take a full water bottle, put drip tube into the full water bottle (dip tube can
punch in the non-spill cap without peel it off).
3. Turn the bottle lock handle all
the way to the left to lock the
bottle. See diagram on
the right.
4. Connect cooler to a 120 volt electrical outlet.
5. Touch light icon to turn on all lights on the LED display.
6. Depress safety lock and hot faucet push button (model no.: SOBK210MBL)
or touch safety and hot water icon (SOBK210EBL) until water flow is
continuous and clear.
7. Power on hot switch located at the back of the cooler top left side.
lTurn ‘ON’ the switch after installation is complete for hot water.
l- Turn ‘OFF’ the switch if hot water is not required.
7. To set various water temperature following instructions on page 5.
8. To set the time following instructions on page 5.
CAUTION: Hot tank must be filled with water before turning on hot switch.
To prevent injury children should not operate this appliance without direct
adult supervision.

7
CLEANING
To avoid accidents, unplug the appliance from the power supply
before cleaning.
ALL PLASTIC PARTS ARE DISHWASHER SAFE.
Bottle ring, drip tray and cabinet can be cleaned with most mild on-abrasive
household cleaners. To prevent damage to plastic parts, avoid abrasive
cleaning aids such as steel wool etc.
MAINTENANCE
lCondenser: To ensure optimum cooler performance, condenser must be
maintained free of dust and lint. Condenser must be regularly inspected
and cleaned with soft brush.
lDrip Tray: The drip tray should be emptied and cleaned regularly. To
remove, pull tray straightforward from the cabinet.
lStorage / Return Shipment: If the cooler is removed from service, the water
must be completely drained from the system using the drain located on the
back of the cooler.
Caution: allow cooler to set, unplugged, for at least 5 hours prior to
draining. This will allow the hot water to cooler and prevent injury.

8
LIMITED WARRANTY
TERMS AND CONDITIONS – This warranty is “limited” to a dispenser installed
in non-restricted locations, such as residences or offices. This warranty does
not provide any allowances for labor reimbursement. This limited warranty does
not offer coverage for components that are not factory installed such as dealer
installed accessories not originally sold by this manufacturer. If paint or other
appearance imperfections are noted at time of installation, the owner must
advise the installer or the supplier without delay.
INSTALLATION AND OPERATION – The foregoing Limited Warranty applies
only when the dispenser is installed and operated in accordance with the
Manufacturer’s written instructions included with each unit. It does not apply to
dispensers, which on examination by the Manufacturer or his agent, are found
to have been subjected to accident, modifications, abuse, misuse,
misapplications, corrosive type atmospheres, or abnormal use.
Warranty-The Manufacturer warrants the complete water dispenser including
compressor, hermetically sealed refrigeration system, water system faucets,
and electrical components to be free from defects in material and workmanship
under normal use for twenty four (24) months from Invoice date.
OWNER’S OBLIGATIONS – Owner to provide proof of installation date when
repair is required. The owner has the obligation and responsibility to diagnose
and/or make minor adjustments and to reimburse the authorized service center
or the Manufacturer for any other repair not covered by the terms of this Limited
Warranty. The owner also has the obligation and responsibility to return the
complete unit to the owners place of business, closest authorized distributor,
service center or to the factory repair department if the compressor, refrigeration
or water system is found to be defective during the warranty period.

9
MANUFACTURER’S OBLIGATIONS – The Manufacturer warrants the
complete water dispenser including compressor, hermetically sealed
refrigeration system, water system faucets, and electrical components to be free
from defects in material under normal use for 2 years from date of installation or
twenty -seven months from date of shipment from Manufacturer, whichever
occurs first. Coverage is limited to replacing a defective cooler with a similar
cooler, crediting the customer the amount paid for the defective cooler,
reimbursing the customer the amount paid for the defective cooler, or providing
parts to repair or replace any part of the water dispenser which is expressly
covered by this Limited Warranty at the manufacturer’s option. In any case, the
value of the Warranty shall not exceed the original purchase price paid for the
water dispenser.
PERSONS ENTITLED TO BENEFIT WARRANTY – This Limited Warranty is
applicable only to (i) purchasers who purchase the water dispenser for resale in
the ordinary course of business, and (ii) the first person who purchases the
water dispenser other than for resale.
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. ALL IMPLIED WARRANTIES, ARISING BY LAW OR
OTHERWISE, INCLUDING WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE SAME PERIOD OF TIME AS THIS
LIMITED WARRANTY. Some states of the United States do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply.
This Limited Warranty gives specific legal rights,and in some states of the
United States there may also be other rights, which vary from state to state.

10
EXCEPT AS OTHERWISE EXPRESSLY PROVIDED ABOVE, THE
MANUFACTURER MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, TO ANY PERSON.