Brookstone BIG BLUE GO User manual

COMPACT WIRELESS SPEAKER
BIG BLUE GO

COMPACT WIRELESS SPEAKER
BIG BLUE GO
Carabiner
USB Type-C Cable
User Guide
Wireless Speaker
IN THE BOX
01

TOP
FRONT
Power
button
Passive Radiator
Carabiner
3.5mm
audio port
SIDE BACK
USB Type-C
port
– button + button
LED indicator
LOCATION OF CONTROLS
02

Wall outlet
USB adaptor
(not included)
USB Type-C Cable
Insert the USB Type-C cable into the speaker’s USB port as shown below
and connect the other end to any USB adaptor or charging device. The
LED will light up red while charging and turn off when fully charged.
CHARGING
Note: When the battery is low the ”Battery Low ”prompt is heard and
the blue LED will flash once every 10 seconds.
03

Gently touch the Power button
Correct Don’t push down on
the Power button
Incorrect
The Power button is used to power the speaker on or off, play/pause
your music, or answer an incoming call.
The Power button is touch-controlled. Gently touch it instead of
pressing down:
POWER BUTTON
04

Power button
LED indicator
POWER ON/OFF
Power on
Touch and HOLD the Power button for 2 seconds until the speaker
powers on.
Power o
Touch and HOLD the Power button until the blue LED light turns off.
Note: The speaker will automatically power off after 30 minutes of
inactivity.
05

Power button
BLUETOOTH PAIRING
Connecting
1. When the speaker is powered on for the first time or not connected
to a device, it will be in pairing mode, and the LED will flash blue.
Bluetooth Profile: A2DP V1.3, AVRCP V1.6, HFP V1.7, HSP V1.2
06

BKS350
DEVICES
Bluetooth
2. Open your device’s Bluetooth menu and find BKS350 and select
it to pair.
3. Once paired,“Connected”will be heard and the LED will turn solid BLUE.
07

Disconnecting
Press and HOLD the“+” and“–”buttons for 3 seconds to disconnect the
speaker from a device. Once it disconnects, you’ll hear “Disconnected”
and it will go into pairing mode.
Note: This feature is handy to quickly pair the speaker to a new device.
08

Correct Incorrect
passive radiator
Place the speaker as shown below, on a flat and stable surface.
Note: The passive radiator produces
powerful bass which may cause the
speaker to vibrate when playing songs
with lots of bass at the speaker’s highest
volume level. If that occurs, try changing
the location of the speaker or place it on
a different type of surface.
SPEAKER PLACEMENT
9