Brother HL-L8250CDN User manual

The machine's LCD displays Ready. c Go to step 4
The machine's LCD displays Setup Wi-Fi?. c Go to step 5
1
2
3
4
1
2
3
Unpack the machine and check the components
Drum Unit
(pre-installed)
Toner Cartridges
(Black, Cyan, Magenta and Yellow;
pre-installed)
Waste Toner Box
(pre-installed)
Power Cord Quick Setup Guide
Product Safety GuideCD-ROMBelt Unit
(pre-installed)
Read the Product Safety Guide rst, and then read this Quick Setup
Guide for the correct installation procedure.
NOTE:
The components included in the box and the AC power plug•
connection may differ depending on your country.
The illustrations in this Quick Setup Guide are based on the •
HL-L8350CDW.
You must purchase the correct interface cable for the interface you•
want to use:
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 6 feet (2 meters) long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
If the machine's LCD displays Setup Wi-Fi? after you turn on, do one of the following:
(To change the language)
Press bto select No, and then back to step 4.
(To connect your computer)
Press bto select No, and then go to step 6.
(To connect your mobile device)
Press ato select Yes, and then go to Print using your mobile device in step 6.
Press
1. aor bto display General Setup, and then press OK.
Press
2. OK to select Local Language.
Press
3. aor bto select your language, and then press OK.
Go to step 6.
1Remove the packing material from the machine
2Load paper in the paper tray
3Connect the power cord and turn on the machine
5Wireless setup for WLAN models only 4Select your language
Adjust the paper guides.
Quick Setup Guide
HL-L8250CDN / HL-L8350CDW / HL-L8350CDWT
The latest manuals are available at Brother Solutions Center:
http://solutions.brother.com/.
Not all models are available in all countries.
Version 0
ENG

Finish
Wireless Network Connection
Finish
[Recommended]
Temporarily use a USB cable
for easy setup.
Conguration using the CD-ROM (Windows®)
Conguration without using the CD-ROM (Windows® without CD-ROM drive or Macintosh)
6
Follow the on-screen instructions until
the Connection Type screen appears.
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
Finish
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
[Option]
Select if you do not have a USB cable.
Download the full driver and software package from the Brother Solutions Center.
(For Windows®) solutions.brother.com/windows
(For Macintosh) solutions.brother.com/mac
Print from your mobile devices using our free application “Brother iPrint&Scan”.
Connect the machine and wireless LAN access point/router from the machine's control panel.
1.
Download “Brother iPrint&Scan" to start using your machine with mobile devices.
2. solutions.brother.com/ips
Print using your mobile device
Select the specied SSID,
and then enter the Network key.
Press OK Press ato select On
Select Method
Setup Wizard
WLAN Enable?
aOn bOff
For USB Connection
For Wired Network Connection
Connect a network cable rst.
For Wireless Network Connection