Brother HL1210W User manual

Unpack the machine and check the components
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure.
NOTE:
•The components included in the box and the AC power plug may differ
depending on your country.
•The available connection interfaces vary depending on the model.
•The illustrations in this Quick Setup Guide are based on the HL‑1210W or
HL‑1212W.
•You must purchase the correct interface cable for the interface you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres (6 feet) long.
Remove the packing materials and install the toner cartridge
Load paper in the paper tray
Connect the machine to your computer/mobile device
Connect the power cord and turn on the machine
Inbox/Starter Toner Cartridge A5 Long Edge Paper Input
Support
CD‑ROM
3
2
4
1
• Windows®PC with a CD‑ROM drive, go to step 4A
• Windows®PC without a CD‑ROM drive, go to step 4B
• Macintosh, go to step 4B
• Mobile device users with a WPS/AOSS™‑supported access point/router, go to step 4C
Back Front
POWER OFF READY SLEEP
DEEP SLEEP
WARMING UP
COOLING DOWN
RECEIVING DATA
DATA REMAINING TONER LOW REPLACE TONER PAPER JAM DRUM END SOON REPLACE DRUM
Dimmed 1 second interval 0.5 second interval
Printer LED Indications Blinking: or ON: OFF:
Adjust the paper guides to fit
the paper being used.
To use A5 Long Edge paper.
Quick Setup Guide
HL‑1210W(E) / HL‑1211W / HL‑1212W
Not all models are available in all countries.
The latest manuals are available at the Brother
Solutions Center: solutions.brother.com/manuals.
Watch our FAQ Videos for help
with setting up your Brother
machine:
solutions.brother.com/videos.
Version 0
ENG

Configuration using the CD‑ROM (Windows®)
Follow the on‑screen
instructions until the
Connection Type screen
appears.
Finish
4A
Download the full driver and software package from the Brother Solutions Center.
(For Windows®) solutions.brother.com/windows
(For Macintosh) solutions.brother.com/mac
After you download the driver and software package, follow the on‑screen instructions until the Connection Type screen appears. Refer to 4A Configuration using the CD-ROM
(Windows®).
If your wireless LAN access point/router supports automatic wireless (one‑push) setup (WPS/AOSS™), you can set up your machine without using a computer.
Connection Type
Print using your mobile device
For USB Connection
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.
Follow the on‑screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
One‑push wireless setup for mobile devices (Wireless models only)
Wireless Network Connection
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
Follow the on‑screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
Configuration without using the CD‑ROM (Windows®without CD‑ROM drive or Macintosh)
4C
4B
Wireless setup is now complete.
NOTE:
Before you can use your machine with your mobile device, download
“Brother iPrint&Scan.”
Finish
Press the WPS or AOSS™ button on your
wireless LAN access point/router.
Press and hold the WiFi button on your
machine for about 2 seconds. The WiFi
button will light up when connected.
Download “Brother iPrint&Scan” to start using your machine with mobile devices.
solutions.brother.com/ips
NOTE:
If the Brother screen does not appear automatically, go to Computer (My Computer).
(For Windows®8: click the (File Explorer) icon on the taskbar, and then go to Computer.)
Double‑click the CD‑ROM icon, and then double‑click start.exe.
Brother support website http://support.brother.com