Brother MFC-J615W Assembly instructions

ADVANCED
USER’S GUIDE
MFC-J615W
Version 0
UK/IRE/GEN

i
User's Guides and where do I find it?
Which manual? What's in it? Where is it?
Safety and Legal Please read the Safety Instructions before you
set up your machine.
Printed / In the box
Quick Setup Guide Read this Guide first. Follow the instructions for
setting up your machine and installing the
drivers and software for the operating system
and connection type you are using.
Printed / In the box
Basic User's Guide Learn the basic Fax, Copy, Scan and
PhotoCapture Center™ operations and how to
replace consumables. See troubleshooting tips.
Printed / In the box
Advanced User's Guide Learn more advanced operations: Fax, Copy,
security features, printing reports and
performing routine maintenance.
PDF file /
Documentation
CD-ROM
Software User's Guide Follow these instructions for Printing, Scanning,
Network Scanning, PhotoCapture Center™,
Remote Setup, PC-Fax, and using the Brother
ControlCenter utility.
PDF file /
Documentation
CD-ROM
Network User's Guide This Guide provides more advanced
information for configuring the Ethernet and
Wireless network connections. In addition, find
information about network utilities, network
printing, troubleshooting tips and supported
network specifications.
PDF file /
Documentation
CD-ROM

ii
Table of Contents
1 General setup 1
Memory storage..................................................................................................... 1
Automatic Daylight Saving Time............................................................................1
Sleep Mode ........................................................................................................... 2
LCD display ...........................................................................................................2
Setting the Dim Timer for the backlight ...........................................................2
Setting the Wallpaper ......................................................................................2
Mode Timer............................................................................................................3
2 Security features 4
TX Lock .................................................................................................................4
Setting and changing the TX Lock password ..................................................4
Turning TX Lock on/off ....................................................................................5
3 Sending a fax 6
Additional sending options.....................................................................................6
Sending faxes using multiple settings .............................................................6
Contrast ...........................................................................................................6
Changing fax resolution...................................................................................7
Setting your changes as a new default............................................................7
Restoring fax settings to the factory settings...................................................7
Additional sending operations................................................................................8
Sending a fax manually ...................................................................................8
Dual Access (Monochrome only).....................................................................8
Broadcasting (Monochrome only)....................................................................8
Real Time Transmission..................................................................................9
Overseas Mode .............................................................................................10
Delayed Faxing (Monochrome only)..............................................................10
Delayed Batch Transmission (Monochrome only)......................................... 10
Checking and cancelling waiting jobs............................................................ 10
Polling overview................................................................................................... 11
Polled Transmit (Monochrome only)..............................................................11

iii
4 Receiving a fax 13
Memory Receive (Monochrome only)..................................................................13
Out of Paper Reception .................................................................................13
Fax Forwarding..............................................................................................13
Fax Storage ...................................................................................................14
Printing a fax from the memory .....................................................................14
PC-Fax Receive (Windows®only).................................................................14
Turning off Memory Receive operations........................................................16
Changing Memory Receive operations .........................................................16
Remote Retrieval .................................................................................................17
Setting a Remote Access Code..................................................................... 17
Using your Remote Access Code..................................................................17
Remote Fax commands ................................................................................18
Retrieving fax messages ...............................................................................19
Changing your Fax Forwarding number ........................................................19
Additional receiving operations............................................................................20
Printing a reduced incoming fax ....................................................................20
Polling overview................................................................................................... 20
Polling receive ...............................................................................................20
5 Dialling and storing numbers 22
Voice operations ..................................................................................................22
BT Call Sign (U.K. only)................................................................................. 22
Additional dialling operations ...............................................................................23
Combining Quick Dial numbers .....................................................................23
Additional ways to store numbers ........................................................................24
Storing Speed Dial numbers from Outgoing Calls.........................................24
Storing Speed Dial numbers from the Caller ID history.................................24
Setting up groups for broadcasting................................................................25
6Printingreports 27
Fax reports...........................................................................................................27
Transmission Verification Report...................................................................27
Fax Journal (activity report) ...........................................................................27
Reports ................................................................................................................28
How to print a report ......................................................................................28

iv
7 Making copies 29
Copy settings ....................................................................................................... 29
Stop copying.................................................................................................. 29
Changing copy speed and quality .................................................................29
Enlarging or reducing the copied image........................................................30
Making N in 1 copies or a poster (Page Layout) ........................................... 30
Sorting copies using the ADF ........................................................................ 32
Adjusting Density ........................................................................................... 32
Ink Save Mode...............................................................................................32
Book Copy ..................................................................................................... 33
Watermark Copy............................................................................................ 33
Setting your changes as a new default..........................................................35
Restoring all settings to the factory settings .................................................. 35
8 Printing photos from a memory card or
USB Flash memory drive 36
PhotoCapture Center™ operations ..................................................................... 36
Memory cards, USB Flash memory drive and folder structures .................... 36
Movie printing ................................................................................................ 36
Print Images......................................................................................................... 37
Print Index (Thumbnails) ...............................................................................37
Printing Photos .............................................................................................. 37
Print All Photos .............................................................................................. 38
Enhance Photos ............................................................................................ 38
Search by Date .............................................................................................. 41
Slide Show..................................................................................................... 41
Trimming........................................................................................................42
DPOF printing ................................................................................................ 42
PhotoCapture Center™ print settings.................................................................. 43
Print Quality ................................................................................................... 43
Paper options ................................................................................................ 43
Adjusting Brightness, Contrast and Colour.................................................... 44
Cropping ........................................................................................................45
Borderless printing......................................................................................... 46
Date Print....................................................................................................... 46
Setting your changes as a new default..........................................................46
Restoring all settings to the factory settings .................................................. 46
Scan to a memory card or USB Flash memory drive .......................................... 47
Auto Crop ...................................................................................................... 47
How to set a new default ...............................................................................48
How to reset to factory settings ..................................................................... 48

v
9 Printing photos from a camera 49
Printing photos directly from a PictBridge camera...............................................49
PictBridge requirements ................................................................................49
Setting your digital camera ............................................................................49
Printing Images..............................................................................................50
DPOF printing ................................................................................................50
Printing photos directly from a digital camera (without PictBridge)......................51
Printing Images..............................................................................................51
A Routine maintenance 52
Cleaning and checking the machine....................................................................52
Cleaning the outside of the machine .............................................................52
Cleaning the machine’s printer platen ...........................................................53
Checking the ink volume ...............................................................................53
Packing and shipping the machine ......................................................................54
B Glossary 57
C Index 61

1
1
1
Memory storage 1
Even if there is a power failure, you will not
lose the settings you have chosen using the
Menu key because they are stored
permanently. Also, you will not lose your
settings in the FAX, COPY and
PHOTO CAPTURE mode key menus if you
have chosen Set New Default. You may
have to reset the date and time.
Automatic Daylight
Saving Time 1
You can set the machine to change
automatically for daylight saving time. It will
reset itself forward one hour in the Spring and
backward one hour in the Autumn. Make sure
you have set the correct date and time in the
Date&Time setting.
aPress Menu.
bPress aor bto choose
General Setup.
Press OK.
cPress aor bto choose
Auto Daylight.
dPress dor cto choose Off (or On).
Press OK.
ePress Stop/Exit.
General setup 1

Chapter 1
2
Sleep Mode 1
You can choose how long the machine will
remain idle (from 1 to 60 minutes) before it
goes into sleep mode. The timer will restart if
any operation is carried out on the machine.
aPress Menu.
bPress aor bto choose
General Setup.
Press OK.
cPress aor bto choose Sleep Mode.
dPress dor cto choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins.
Press OK.
ePress Stop/Exit.
LCD display 1
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after the last key press.
aPress Menu.
bPress aor bto choose
General Setup.
Press OK.
cPress aor bto choose LCD Settings.
Press OK.
dPress aor bto choose Dim Timer.
ePress dor cto choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
fPress Stop/Exit.
Setting the Wallpaper 1
You can change the wallpaper.
aPress Menu.
bPress aor bto choose
General Setup.
Press OK.
cPress aor bto choose LCD Settings.
Press OK.
dPress aor bto choose Wallpaper.
Press OK.
ePress aor bto choose your wallpaper
from the four available designs.
Press OK.
fPress Stop/Exit.

General setup
3
1
Mode Timer 1
The machine has four temporary mode keys
on the control panel: FAX, SCAN, COPY and
PHOTO CAPTURE. You can change the
amount of time the machine takes after the
last Scan, Copy or PhotoCapture operation
before it returns to Fax mode. If you choose
Off, the machine stays in the mode you used
last.
aPress Menu.
bPress aor bto choose
General Setup.
Press OK.
cPress aor bto choose Mode Timer.
dPress dor cto choose 0Sec, 30Secs,
1Min, 2Mins, 5Mins or Off.
Press OK.
ePress Stop/Exit.

4
2
TX Lock 2
TX Lock lets you prevent unauthorized
access to the machine. You will not be able to
continue to schedule Delayed Faxes or
Polling jobs. However, any pre-scheduled
Delayed Faxes will be sent even if you turn on
TX Lock, so they will not be lost.
While TX Lock is On, the following operations
are available:
Receiving faxes
Fax Forwarding
(if Fax Forwarding was already On)
Remote retrieval
(if Fax Storage was already On)
PC-Fax Receive
(if PC-Fax Receive was already On)
While TX Lock is On, the following operations
are NOT available:
Sending faxes
Copying
PC printing
Scanning
PhotoCapture
Operation from the Control panel
Note
If you forget the TX Lock password,
please call your Brother dealer for service.
Setting and changing the
TX Lock password 2
Note
If you have already set the password, you
will not need to set it again.
Setting the password 2
aPress Menu.
bPress aor bto choose Fax.
Press OK.
cPress aor bto choose
Miscellaneous.
Press OK.
dPress aor bto choose TX Lock.
Press OK.
eEnter a 4-digit number for the password.
Press OK.
fWhen the LCD shows Verify:,
re-enter the password.
Press OK.
gPress Stop/Exit.
Changing the password 2
aPress Menu.
bPress aor bto choose Fax.
Press OK.
cPress aor bto choose
Miscellaneous.
Press OK.
dPress aor bto choose TX Lock.
Press OK.
ePress aor bto choose Set Password.
Press OK.
fEnter a 4-digit number for the current
password.
Press OK.
gEnter a 4-digit number for a new
password.
Press OK.
Security features 2

Security features
5
2
hWhen the LCD shows Verify:,
re-enter the password.
Press OK.
iPress Stop/Exit.
Turning TX Lock on/off 2
Turning TX Lock on 2
aPress Menu.
bPress aor bto choose Fax.
Press OK.
cPress aor bto choose
Miscellaneous.
Press OK.
dPress aor bto choose TX Lock.
Press OK.
ePress aor bto choose Set TX Lock.
Press OK.
fEnter the registered 4-digit password.
Press OK.
The machine goes offline and the LCD
shows TX Lock Mode.
Turning TX Lock off 2
aPress Menu.
bEnter the registered 4-digit password.
Press OK.
TX Lock is automatically turned off.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in TX Lock
mode until the registered password is
entered.

6
3
Additional sending
options 3
Sending faxes using multiple
settings 3
When you send a fax you can choose any
combination of these settings: resolution,
contrast, scan size, etc.
aPress (FAX).
The LCD shows:
bPress aor bto choose a setting you
want to change.
cPress dor cto choose an option.
Press OK.
dGo back to bto change more settings.
Note
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as default.
These settings will stay until you change
them again. (See Setting your changes as
a new default on page 7.)
Contrast 3
If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Choose Light when sending a light
document. Choose Dark when sending a
dark document.
aPress (FAX).
bPress aor bto choose Contrast.
cPress dor cto choose Auto, Light or
Dark.
Press OK.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a colour fax.
• When you choose Photo as the Fax
Resolution.
Sending a fax 3
FAX
FAX
Fax Press Start
Enter Number
Fax Resolution Standard
Contrast Auto
Speed Dial

Sending a fax
7
3
Changing fax resolution 3
The quality of a fax can be improved by
changing the fax resolution.
aPress (FAX).
bPress aor bto choose
Fax Resolution.
cPress dor cto choose the resolution
you want.
Press OK.
Note
You can choose four different resolution
settings for monochrome faxes and two
for colour.
If you choose S.Fine or Photo and then
use the Colour Start key to send a fax,
the machine will send the fax using the
Fine setting.
Setting your changes as a
new default 3
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Glass ScanSize you
use most often by setting them as default.
These settings will stay until you change
them again.
aPress (FAX).
bPress aor bto choose the menu option
that you want to change. Press dor cto
choose your new option.
Repeat this step for each setting you
want to change.
cAfter changing the last setting, press
aor bto choose Set New Default.
Press OK.
dPress 1to choose Yes.
ePress Stop/Exit.
Restoring fax settings to the
factory settings 3
You can restore the fax settings
Fax Resolution, Contrast,
Real Time TX, and Glass ScanSize,
that you have changed, to the factory
settings.
aPress (FAX).
bPress aor bto choose
Factory Reset.
Press OK.
cPress 1to choose Yes.
dPress Stop/Exit.
Monochrome
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than Fine
resolution.
Photo Use when the document has
varying shades of grey or is a
photograph. Photo has the
slowest transmission.
Colour
Standard Suitable for most typed
documents.
Fine Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.

Chapter 3
8
Additional sending
operations 3
Sending a fax manually 3
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
Note
To send a multiple page fax, use the ADF.
aPress (FAX).
bLoad your document.
cTo listen for a dial tone pick up the
handset of the external telephone.
dDial the fax number.
eWhen you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass
press 1on the machine to send a fax.
fReplace the handset.
Dual Access
(Monochrome only) 3
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
Broadcasting
(Monochrome only) 3
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed Dial
numbers, and up to 50 manually dialled
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
aPress (FAX).
bLoad your document.
cPress aor bto choose Broadcasting.
Press OK.
dYou can add numbers to the broadcast
in the following ways:
Press aor bto choose Add Number
and enter a number using the dial
pad.
Press OK.
Press aor bto choose Speed Dial
and OK. Press aor bto choose
Alphabetic Order or
Numeric Order and OK.
Press aor bto select a number and
OK.
eAfter you have entered all the fax
numbers by repeating step d, press
aor bto choose Complete.
Press OK.
fPress Mono Start.

Sending a fax
9
3
Note
• If you did not use up any of the numbers
for Groups, you can “broadcast” faxes to
as many as 250 different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access and delayed
fax.
• If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
Cancelling a Broadcast in progress 3
aPress Menu.
bPress aor bto choose Fax.
Press OK.
cPress aor bto choose
Remaining Jobs.
Press OK.
The LCD will show the fax number being
dialled and the Broadcast job number.
dPress OK.
The LCD will ask you the following
question:
Cancel Job?
Yes iPress 1
No iPress 2
ePress 1to cancel the fax number being
dialled.
The LCD will then show the Broadcast
job number.
fPress OK.
The LCD will ask you the following
question:
Cancel Job?
Yes iPress 1
No iPress 2
gTo cancel the Broadcast, press 1.
hPress Stop/Exit.
Real Time Transmission 3
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
aPress (FAX).
bPress aor bto choose Real Time TX.
cPress dor cto choose On (or Off).
Press OK.
Note
• If the memory is full and you are sending a
black & white fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to
Off). Faxes from the scanner glass
cannot be sent until you clear some of the
memory.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.

Chapter 3
10
Overseas Mode 3
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
aPress (FAX).
bLoad your document.
cPress aor bto choose
Overseas Mode.
dPress dor cto choose On (or Off).
Press OK.
Delayed Faxing
(Monochrome only) 3
You can store up to 50 faxes in the memory
to be sent within 24 hours. These faxes will
be sent at the time of day you enter in step e.
aPress (FAX).
bLoad your document.
cPress aor bto choose Delayed Fax.
dPress dor cto choose On.
Press OK.
eEnter the time you want the fax to be
sent (in 24-hour format).
(For example, enter 19:45 for 7:45 PM.)
Press OK.
Note
The number of pages you can scan into
the memory depends on the amount of
data that is printed on each page.
Delayed Batch Transmission
(Monochrome only) 3
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time. All delayed faxes that are
scheduled to be sent at the same time to the
same fax number will be sent as one fax to
save transmission time.
aPress (FAX).
bPress aor bto choose Batch TX.
cPress dor cto choose On.
Press OK.
dPress Stop/Exit.
Checking and cancelling
waiting jobs 3
You can check which jobs are still waiting in
the memory to be sent, or cancel a job.
(If there are no jobs, the LCD shows
No Jobs Waiting.)
aPress Menu.
bPress aor bto choose Fax.
Press OK.
cPress aor bto choose
Remaining Jobs.
Press OK.
Any waiting jobs appear on the LCD.
dPress aor bto scroll through the jobs
and choose the job you want to cancel.
Press OK.
eDo one of the following:
To cancel, press 1to choose Yes.
If you want to cancel another job go
to step d.
To exit without cancelling, press 2to
choose No.
fWhen you have finished, press
Stop/Exit.

Sending a fax
11
3
Polling overview 3
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polled Transmit
(Monochrome only) 3
Polled transmit lets you set up your machine
to wait with a document so another fax
machine can call and retrieve it.
The document will be stored and can be
retrieved by any other fax machine until you
delete it from the memory. (See Checking
and cancelling waiting jobs on page 10.)
Setup for polled transmit 3
aPress (FAX).
bLoad your document.
cPress aor bto choose Polled TX.
dPress dor cto choose Standard.
Press OK.
ePress aor bto choose any settings you
want to change.
Press dor cto choose the settings.
After each setting is accepted, you can
continue to change more settings.
fPress Mono Start.
gIf you are using the scanner glass, the
LCD will prompt you to choose one of
the options.
Press 1to send another page.
Go to step h.
Press 2or Mono Start to send the
document.
hPlace the next page on the scanner
glass.
Press OK.
Repeat steps gand hfor each
additional page.
Your machine will automatically send
the fax.
Setup for polled transmit with secure
code 3
Secure Polling lets you restrict who can get
the documents you set up to be polled.
Secure Polling only works with Brother fax
machines. If another person wants to retrieve
a fax from your machine, they will have to
enter the secure code.
aPress (FAX).
bLoad your document.
cPress aor bto choose Polled TX.
dPress dor cto choose Secure.
Press OK.
eEnter a four-digit number.
Press OK.
fPress aor bto choose any settings you
want to change.
Press dor cto choose the settings.
After each setting is accepted, you can
continue to change more settings.

Chapter 3
12
gPress Mono Start.
hIf you are using the scanner glass, the
LCD will prompt you to choose one of
the options.
Press 1to send another page.
Go to i.
Press 2or Mono Start to send the
document.
iPlace the next page on the scanner
glass, press OK. Repeat steps hand i
for each additional page.
Your machine will automatically send
the fax.

13
4
4
Memory Receive
(Monochrome only) 4
You can only use one Memory Receive
operation at a time:
Fax Forwarding
Fax Storage
PC-Fax Receive
Off
You can change your selection at any time. If
received faxes are still in the machine’s
memory when you change the Memory
Receive operation, a message will appear on
the LCD. (See Changing Memory Receive
operations on page 16.)
Out of Paper Reception 4
As soon as the paper tray becomes empty
during fax reception, the LCD shows
No Paper Fed. Put some paper in the
paper tray. (See Loading paper and other
print media in chapter 2 in the Basic User’s
Guide.)
The machine will carry on receiving the fax,
with the remaining pages being stored in
memory, if enough memory is available.
Further incoming faxes will also be stored in
memory until the memory is full. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, put fresh paper in the tray.
Fax Forwarding 4
When you choose Fax Forward, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
aPress Menu.
bPress aor bto choose Fax.
Press OK.
cPress aor bto choose
Setup Receive.
Press OK.
dPress aor bto choose
Memory Receive.
Press OK.
ePress aor bto choose Fax Forward.
Press OK.
fEnter the forwarding number (up to
20 digits).
Press OK.
gPress aor bto choose
Backup Print:On or
Backup Print:Off.
Press OK.
IMPORTANT
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
• When you receive a colour fax, your
machine prints the colour fax at your
machine but does not send the fax to the
fax forwarding number you programmed.
hPress Stop/Exit.
Receiving a fax 4

Chapter 4
14
Fax Storage 4
If you choose Fax Storage, your machine
stores the received fax in the memory. You
will be able to retrieve fax messages from
another location using the remote retrieval
commands.
If you have set Fax Storage, a backup copy
will automatically be printed at the machine.
aPress Menu.
bPress aor bto choose Fax.
Press OK.
cPress aor bto choose
Setup Receive.
Press OK.
dPress aor bto choose
Memory Receive.
Press OK.
ePress aor bto choose Fax Storage.
Press OK.
fPress Stop/Exit.
Note
Colour faxes cannot be stored in the
memory. When you receive a colour fax
your machine prints the colour fax at your
machine.
Printing a fax from the
memory 4
If you have chosen Fax Storage, you can still
print a fax from the memory when you are at
your machine.
aPress Menu.
bPress aor bto choose Fax.
Press OK.
cPress aor bto choose
Print Document.
Press OK.
dPress Mono Start.
ePress Stop/Exit.
Note
When you print a fax from the memory, the
fax data will be erased.
PC-Fax Receive
(Windows®only) 4
If you turn on the PC-Fax Receive feature
your machine will store received faxes in
memory and send them to your PC
automatically. You can then use your PC to
view and store these faxes.
Even if you have turned off your PC (at night
or on the weekend, for example), your
machine will receive and store your faxes in
its memory. The number of received faxes
that are stored in the memory will appear at
the bottom left side of the LCD.
When you start your PC and the PC-FAX
Receiving software runs, your machine
transfers your faxes to your PC automatically.
To transfer the received faxes to your PC you
must have the PC-FAX Receiving software
running on your PC. (For details, see PC-FAX
receiving in the Software User’s Guide.)
If you choose Backup Print:On the
machine will also print the fax.
aPress Menu.
bPress aor bto choose Fax.
Press OK.
cPress aor bto choose
Setup Receive.
Press OK.
dPress aor bto choose
Memory Receive.
Press OK.