Brouwland BREWFERM pro User manual

Brouwland bvba
Korspelsesteenweg 86 • B-3581 Beverlo - Belgium
Tel. [phone] • Fax. [phone]
[email protected] • www.brouwland.com
Instructions for use
Brewing kettle BREWFERM®pro

2









Operation elements
1 Lid handle
2 Lid
3 Handles
4 Body in steel - enamel
5 Lower part
6 Display (more information on page 6)
7 Cable retainer and plug holder (underneath)
8 Tap
electronically controlled, LCD-display
1800 W/220-230 V
Brewing kettle BREWFERM®pro

3
Contents
Before use........................................................... 4
Technical data..................................................... 4
Safety instructions............................................... 4
Application........................................................... 5
Operating buttons................................................ 6
Model with tap..................................................... 8
Cleaning and maintenance................................. 8
Recycling............................................................ 9
Service................................................................ 9
Model types........................................................ 9
Warranty.............................................................. 9
Brewing kettle BREWFERM®pro

4
Brewing kettle BREWFERM®pro
Before use
Read these instructions carefully. They hold important
information for use, safety and maintenance of the appli-
ance. Keep the instructions in a safe place. Hand them
on to others or to subsequent users if it is sold/handed
down. This appliance may only be used for the intended
purpose as dened in these operating instructions.
Observe the safety instructions when using the appliance.
Technical data
Mains voltage : 220 -230 V ~ 50 Hz
Power : 1800 watt
Capacity : 27 litres in normal mode,
23 litres in cooking mode
(corresponds to lling height of 4 cm
below the rim of the pot)
Weight : 6,05 kg
Safety instructions
Avoid life-threatening electrical shock:
• Do not use the appliance when the mains cable or
the plug is damaged. Have all parts or devices
that are damaged or do not work properly checked
and repaired immediately by customer service or the
manufacturer.
• Do not use the appliance in moist or wet environs.
Make sure that the mains cable never gets wet or
moist.
Avoid injury:
• Danger of burns! Do not ll the pot higher than 4 cm
below the rim. If the pot is overlled or used with the
lid not properly closed, hot liquid may squirt out.
• Danger of burns! The appliance gets hot. Danger
of burns due to hot steam escaping. Do not move the
pot while using it. Do not pull at the mains cable.
When opening the lid -2- beware of hot steam and
dripping condensation water.
• Do not disconnect the plug from the socket by pulling
at the mains cable. Do not pull the plug from the
socket while your hands are wet.
• Children are unaware of the dangers that may result
from using electrical appliances. Always keep an
eye on the appliance while using it and keep/store it
out of the reach of children.
Introduction / Safety

5
Brewing kettle BREWFERM®pro
How to use properly :
• Unwind the mains cable completely from the bottom.
Connect the appliance only to a grounded (SCHUKO)
AC power socket that has been installed in
accordance with the regulations and has the voltage
as shown on the specication plate. Mains cable and
plug must be dry.
• Do not drag the mains cable along sharp edges.
Avoid jamming the mains cable, and do not let
the cable be suspended. Protect it from heat.
• Use only extension cables that are in perfect
condition and designed for a voltage of at least 10 A.
• Do not use the appliance or pull the mains cable
immediately if:
- the appliance or mains cable is damaged
- the appliance is leaking
- there is cause for concern that it may be
damaged after it fell down or such
Have the appliance repaired in that case.
• Put the appliance on an even and solid base, do not
place it on hot surfaces such as stove tops, hot plates
or near open gas ames; it may start to melt.
• Do not switch the appliance on when there is no
liquid inside, otherwise the pot or the grid may be
damaged.
• Always place the jars on the gridiron (not part of the
delivery) when preserving food.
• Pull the plug in the following cases:
- malfunction during operation
- before cleaning and maintaining it after use
• The appliance gets very heavy when it is lled
entierely. Therefore, it should only be transported
when it is half full.
• Do not submerge the appliance in water when you
clean it.
• We do not assume any liability for damages caused
by misuse, handling errors or unprofessional repair.
Any warranty is excluded in such cases.
Application
Before rst use:
• Clean pot and lid thoroughly before using it the
rst time.
• Fill about 5 litres of water into the preserving boiler
and boil it out.
Note: When rst using the new appliance it may give off
a slight smell because of technical reasons and does not
give any cause for concern.
Indications when operating the appliance:
• Always unwind the mains cable completely.
• Make sure that the mains cable does not get into
contact with the hot appliance during operation.
Caution! When lling in liquids do not exceed a lling
height of 4 cm below the rim of the pot (corresponds
to 23 litres in cooking mode). Then close the lid.
Otherwise there is danger of burns during cooking.
• Do not connect the appliance to the grounded
(SCHUKO) socket before you have lled it up.
• Do not switch the appliance on when there is no
liquid inside, otherwise the enamel or the coated
grid may get damaged. If you have – despite all
caution - switched the appliance on without any water
inside, wait for the appliance to cool down again,
before lling in the water, otherwise there is a risk of
burns through escaping steam.
• Let the condensation water drain into the pot when
removing the lid.
• Avoid transporting when the appliance is lled
completely as it is very heavy – danger of injury.
Drain the appliance before transporting it or skim
some liquid off.
• After using the appliance pull the plug from the socket
and let the appliance cool down.
• Use the cable retainer and the plug holder -7-
underneath to store the cable after use.
Application

6
Brewing kettle BREWFERM®pro
Operating buttons
After switching the appliance on by pressing the On/Off-
button all LCD-segments (liquid crystal display) are lit for
a second.
The temperature that was last set is indicated.
The ciphers of the temperature display blink when the
temperature measured by the boiler differs from the set
temperature (nominal temperature). Once the set tem-
perature is reached, the ciphers are constantly lit.
Time: ▬= continuous operation mode
Appliance heats up until set temperature is reached and
runs in continuous mode until ‚On/Off’ button is pressed
again.
The temperature symbol (°C) blinks, ciphers are perma-
nently lit when the set temperature has not been reached.
Time: ▬ in continuous operation mode; The heating goes
on working during setting mode to heat up until set tem-
perature is reached or set temperature is maintained.
Lowers the temperature; when pressing the button
shortly, a number by number countdown is effected until
30°C are reached (lowest possible temperature setting).
If you keep the button pressed, countdown is faster.
Insert plug
Display is lit
Temperature mode
Switch on the appliance
Temperature display 30 - 100°C Time display 1 - 120 minutes
▬ = continuous operation
Option switch
temperature / time
Min
On / Off
Plus
Press button “On/Off” 1x
Press button
“temperature/time” 1x
“min” button
°C/min
Θ
Θ

7
Brewing kettle BREWFERM®pro
Operating buttons
The time symbol (min) blinks and the time that was last
set is indicated and can be changed by the ‚Min’ or ‚Plus’
button.
If after starting the time setting mode or after changing
the time by pressing the ‚Min’ or ‚Plus’ button no entry is
made for 5 seconds, the time setting mode switches off
and the appliance returns to the operating mode. Upon
reaching the set temperature (nominal temperature), the
time that was last set is counted down.
Raises the temperature; when pressing the button shortly
the temperature counts up number by number until 100°C
are reached (highest possible temperature setting).
If you keep the button pressed, count up is faster.
If after starting the temperature setting mode and chang-
ing the temperature by use of the ‚Min’ or ‚Plus’ button
no entry is made for 5 seconds, the temperature setting
mode switches off and the appliance returns to the oper-
ating mode.
Lengthens the time span; when pressing the button short-
ly the time counts up number by number; (120 minutes /
▬ continuous operation = maximum setting). If you keep
the button pressed, count up is faster.
To change again to the continuous operation mode,
the time must be set to ▬continuous operation in time
setting mode. Even during countdown of the time it is
possible to change temperature and time.
Shortens the time span; when pressing the button shortly,
a number by number countdown is effected; (1 minute =
lowest possible setting). If you keep the button pressed,
countdown is faster.
If the appliance was set to continuous operation mode
before choosing the time setting mode (time indicated: ▬
min), the display changes from ▬continuous operation
mode to 120 min and then countdown to 0 min is started.
The appliance can be switched off at any time. Time
settings made in the time setting mode will not be saved.
The last temperature setting is saved and is displayed
again after restarting the boiler, even if the appliance had
been disconnected from the mains in the meantime.
It is necessary to pull the plug from the socket after
switching off the appliance.
Time mode
Switch off the appliance
Press button
“temperature/time” 2x
“plus” button “plus” button
“min” button
Press button “On/Off” 1x
°C/min
Θ
Θ



8
Brewing kettle BREWFERM®pro
WarmMaster DeLuxe with tap
This model of the preserving boiler comes with a discharge tap, which can be used to ll beverages into drinking
recipients.
Note: To take liquids out of the boiler by using the tap, mover the lever forwards. This way you can serve drinks quickly
and safely.
The tap can be removed for cleaning. For this purpose unscrew the chrome-plated cap below the handle piece. When
putting it back in place just x it hand-tight
Cleaning and maintenance
• Always pull the plug from the socket before cleaning the appliance.
• Never immerse the appliance in water.
• Rinse the inside of the appliance with water. Clean the outside of the appliance with a moist cloth. Do not use any
aggressive or abrasive cleaning materials.
• Use a standard decalcier on a regular basis to remove limescale from the appliance. Proceed as described in the
instructions given by the decalcier manufacturer. Lime on the bottom of the appliance causes losses in energy
and may reduce the lifetime of the appliance.
After using decalcier rinse the appliance thoroughly with clear water.
• Use the cable retainer and the plug holder -7- underneath to store the cable after use.
• To avoid danger, have the appliance repaired or a damaged mains cable replaced by the manufacturer, their
customer service or any other respectively qualied persons only.
Repairs covered by the warranty shall only be carried out by the manufacturer.

9
Brewing kettle BREWFERM®pro
Recycling
All packing materials consist of an environmentally
friendly material. They can be disposed of through the
local waste facilities.
Do not throw away electrical appliances along with
the household garbage!
According to the European Directive 00 /96/EC on waste
electrical and electronic equipment and its transposition
into national law any used electrical appliances must be
collected separately and recycled in an environmentally
correct manner.
Ask your local municipal administration for currently valid
measures of disposal for waste electrical equipment.
Service
For your local service point refer to the warranty card.
Declaration of conformity CE
We, the company Merten & Storck GmbH & Co., Am
Ladestrang 1, 48317 Drensteinfurt, declare that this
product is in accordance with the following standards and
normative documents:
Low voltage directive 73/23/EEC
EN 60335-1
EN 60335-2-15
We grant a
2 year factory warranty
starting from the date of purchase, for every electric
component of this appliance.
Please send us the appliance free of costs together with the warranty
card which shows date of purchase and stamp of the retailer where you
bought the appliance. Any warranty claim becomes void immediately if
the appliance had been opened by unauthorized persons before.
Electromagnetic compatibility :
89/336/CEE
EN 50366
EN 55014-2
EN 55014-1
EN 61000-3-2
EN 61000-3-3
Designation of the product/type :
WarmMaster DeLuxe boiler email
• WarmMaster DeLuxe
• WarmMaster DeLuxe with tap
• 1/4 inche
• 1/2 inche
WarmMaster DeLuxe boiler stainless steel
• WarmMaster DeLuxe
• WarmMaster DeLuxe with tap
• 1/4 inche
• 1/2 inche
Drensteinfurt, 30.03.2006
The appliance is in accordance with the EU-Directives
no. 73/23 EEG and no. 89/336/EEG
Subject to technical alterations.
Dispose of packaging material in a proper manner.
Information