Brown Dog Gadgets Solar Bug User manual

Paint brush (optional)
Scissors
Solar Cell
Double-sided Foam Tape
Paint (optional)
Motor
Rubber O-Ring
Wood Bug Body
2 Pipe Cleaners
CRAFT PAINT
CRAFT PAINT
DECORATE
1
ATTACH MOTOR
2
Push the rubber o-ring onto the motor,
then push the motor through the large hole
in your bug.
Paint your bug body however you like.
Give your paint plenty of time to dry
before moving on.
Please visit www.BrownDogGadgets.com for more great ideas & info.
YOU WILL NEED:
TOOLS:
TIME:
5-10 MINUTES
Solar Bug
Solar Bug
SUPPLIES:

ATTACH SOLAR CELL
3
LEGS & ANTENNA
4
YOU BUILT A SOLAR BUG.
ENJOY!
Peel the backing off of one side of the foam
tape and stick it to the back of the solar cell.
Peel off the other backing and stick the solar
cell to the bug body.
Cut two pipe cleaners in half. Bend each half
into a "U" shape and put the ends into opposite
leg holes from the bottom of your bug. On the
top, bend the legs over to make your bug stand.
Poke the fourth piece through for the antenna.
Please visit www.BrownDogGadgets.com for more great ideas & info.
Peel backing
Peel off other side of tape
Stick solar cell to Bug