Brydge 10.5 User manual

USER MANUAL
Designed For iPad Pro 10.5

Switch Language
ctrl + shift + Spacebar
(Spacebar allows you to toggle through available languages)
Copy
Command + C
Cut
Command + X
Undo
Command + Z
Underline
Command + U
Italic
Command + I
Paste
Command + V
KEYBOARD SHORTCUTS
Show Dock
Command + Option + D
Switch App
Command + Tab
Home Screen
Command + H
Search
Command + Space
To manually power on, press and hold the power key;
the light will turn green for 3 seconds to indicate power
NOTE: Once paired, your Brydge will automatically wake upon opening.
The power key will turn green for three seconds to let you know your
Brydge is awake
To manually power off, press and hold the power key for 3 seconds;
the light will turn red momentarily to indicate it’s powered off
NOTE: To conserve battery, your Brydge will enter sleep mode after 20
minutes of non-use. Press any key to turn back on. Your Brydge will enter
sleep mode when both devices are closed like a laptop
POWER
To remove, hold your iPad and pull
straight up, with one hand firmly
holding your Brydge against a hard
surface
Place your Brydge on a flat
surface, rotate the hinges
upright to 90º and insert your
iPad into the hinges with the
home button on the right
If the iPad is loose, remove
and give the hinges a gentle
squeeze. Repeat this process
until your iPad is held firmly
INSERT/REMOVE
Lift your iPad to test the
hinge grip. Your iPad and
Brydge should be held firmly
together
PAIR
Connected
Settings
On
Once the keyboard is on, press
and hold the BluetoothTM key for
3 seconds. The power key will
flash blue until the keyboard is
successfully paired
On your iPad, under
Settings > Bluetooth
select Brydge 10.5
The light on the power key
will shut off to let you know
the Brydge has paired and the
iPad Settings will say
connected
CHARGE
When battery is 9% or lower,
backlit keys will be disabled and
light will flash continuously
The battery is charging when the light
on the power key is red; your Brydge is
fully charged when the light turns off
Once done charging you can remove
the cable (battery should last 12 months
or more based on use)
To check battery life, press and hold
the battery key for four seconds
Power key will flash three times:
Green = 75-100%
Yellow = 25-74%
Red = 10-24%
To charge your Brydge insert the
supplied MICRO USB cable into the
charging port on the front right
corner
NOTE: Charging can take up to 3
hours

enter
VOLUME
Adjust volume up, down, or mute
QUICK LOCK
Lock your iPad
with a single touch
HOME &
CONTROL
CENTER
- Press once for
home screen
- Press twice for
control center
SCREEN
BRIGHTNESS
Adjust screen
brightness up
and down
BACKLIT KEYS
Adjust the
brightness of your
keyboard
BATTERY
Press to see how much battery life is left
POWER
Turn your Brydge on or off
PLAYER CONTROLS
Rewind, Play/Pause, and Fast Forward
SIRI
Dedicated Siri
button
BLUETOOTH
Press to pair your Brydge and iPad
ON-SCREEN
KEYBOARD
Easily toggle
between your
Brydge and
on-screen
keyboard

Have a question? Contact Brydge directly at
[email protected]
© 2017 Brydge. All Rights Reserved.
Surface®, Microsoft®, Windows®, and Cortana® are
registered trademarks of Microsoft Corporation. The Bluetooth
word, mark, and logos are owned by Bluetooth SIG, Inc.
Use of such marks by Brydge is under license. Brydge is a
trademark of Brydge Global Pte. Ltd. Other trademarks and
tradenames are those of their respective owners.
Find more information at
www.brydgekeyboards.com