BryTech Color Teller User manual

OPERATING INSTRUCTIONS
PLEASE REFER TO THE CD INSTRUCTIONS FOR
FURTHER OPERATING DETAILS ON THE COLOR
TELLER AND WARRANTY PROVISIONS.
Thank you for choosing
tColor Teller
Select Button
Activation Button
Modify Button
1
2
3
t
Color Teller
BRY
TECH Inc

Page 2of 4
t
Operating Controls
Your Color Teller has three operating controls:
1–Activate button (top recessed end of unit) –
brings the unit out of power save mode and initiates
a color sample.
2-Select Button –round button on the bottom of
unit, nearest to sensor end. This allows you to
select volume, language and other announcements
for modifying.
3-Modify Button –oblong button on the bottom of
unit, nearest battery door. This button allows
changes to be made to the “announce mode”
previously selected. (e.g. volume can be set to high,
medium or low. Language can be set to English,
French or Spanish).
Please take some time to go through all the options
in order to find what “set-up” best suits you.
tOperating COLOR TELLER:
•Hold the Color Teller with a finger on the
activation button, which is on the top of the
recessed end of the unit.
•Place the square flat sensor head on object
selected for color recognition.
•Press the activation button; once the button is
released it will announce the color being
identified. Color Teller can announce up to 42
different color combinations.

Page 3of 4
•
The announcement may be delayed by holding
the activation button, upon release it will
announce.
The Select and Modify buttons may only be used
when the unit is operational. The Activate button
brings the unit out of power-save mode into an
operational mode. If no buttons are pressed for 30
seconds, the unit returns to power-save mode.
tColor Teller Announcements:
In addition to announcing the identified color, the
Color Teller will also advise you when the battery
needs to be replaced. Please listen to CD for full
operating details.
tMaintenance Instructions:
To help maintain the life and performance of your
Color Teller the following instructions and
suggestions are provided. Although Color Teller is a
durable electronic device there are some basic steps
one can take to reduce maintenance, which can be
costly and inconvenient.
•Ensure that Color Teller is kept clean.
•Do not drop or subject to forceful impact.
•Keep the unit dry.
•Keep in protective case when not in use.
•Use a 3-volt 123 battery and insert it correctly.

Page 4of 4
t
SERVICE:
Call BRYTECH for assistance at [phone].
If your Color Teller needs to be returned, please
follow these instructions.
•Place the unit in the original shipping box and
enclose a note with your name, address and
telephone number. Wrap the box securely.
•Mail by Post to: BRYTECH, address below –
DO NOT SEND BY COURIER
•Write on the outside of the package in large bold
letters address and shipping information, for ease
the shipping label below can be cut out.
Non-Canadian residents need to add:
Customs # 9813.00.0097 GST # 66
Useful contact information:
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
Website: www.brytech.com
BRYTECH INC
600 Peter Morand Crescent, Suite 240
Ottawa, ON Canada K1G 5Z3
Product for the blind returned to manufacturer